• Energy Research
• Restricted close
• GB close
• ZENODO close

This dataset was generated via a focused piece of research conducted by Dr Matilda Aspinall and Dr Amy Twigger Holroyd which investigated the experiences of students and staff involved in Fashion Fictions projects in 2022 at two institutions: LASALLE College of the Arts in Singapore and Nottingham Trent University. This focused research was situated within the broader Fashion Fictions project. Fashion Fictions, founded by Amy Twigger Holroyd in 2020, brings people together to generate, experience and reflect on engaging fictional visions of alternative fashion cultures and systems. Through these activities, we gain new perspectives on challenges, possibilities and pathways for change in the real world. The project is structured in three stages. Stage 1 prompts contributors to create brief written outlines of fictional fashion cultures and systems, known as Worlds; at Stage 2, participants put flesh on these outlines and create visual or material prototypes to represent their cultures, known as Explorations; at Stage 3, they performatively enact practices or events from the fictional worlds. To find out more about Fashion Fictions, visit the project website. To see other data linked to the project, visit the Fashion Fictions Zenodo community. -------------------------------- In both institutions, Fashion Fictions was initially introduced to the curriculum in the 2020/21 academic year; the activities discussed here took place in the following year, with a second cohort of students. At NTU, first-year undergraduate students from BA (Hons) courses in Fashion Design, Textile Design and Fashion Knitwear Design & Knitted Textiles undertook a short Stage 2 Fashion Fictions project. Spanning three two-hour workshops, the project was part of a Future Thinking toolkit within a module that aims to develop students’ intellectual curiosity and appreciation of the future as something that can be shaped and questioned. Working in small cross-course groups, students were given a specified Stage 1 fiction and asked to create a visual or material prototype to represent everyday life in that world, presented via a selection of images and a short explanatory text. At LASALLE, Fashion Fictions was set up as a major project extending across a 14-week semester for second-year students on two BA (Hons) programmes: Fashion Media and Industries and Fashion Design and Textiles. Also working in cross-course collaborative groups, the students first created their own Stage 1 world and then progressed to create a collection of Stage 2 prototypes in the form of garments and related media such as photographs and films, accompanied by an extensive body of supporting work. -------------------------------- in April and May 2022 we conducted semi-structured interviews with tutors involved in the projects – Lorraine Warde (Principal Lecturer in Fashion Design) at NTU and Martin Bonney and Kathryn Shannon Sim Yen Ping (Lecturers in Fashion, interviewed together) at LASALLE – and with three student groups, selected by the tutors, from each institution. The interview schedules for students and tutors each comprised four reflective questions, designed to gain an insight into the students’ experiences and the tutors’ observations. Each recorded interview lasted between twenty and sixty minutes. -------------------------------- The dataset is organised in nine folders: 1 Project context Project website About page from February 2022 (explaining the wider project at the time of this research). Project website Education projects page from January 2022 (giving context to the education projects taking place at the time of this research). 2 Activity guidance Project website Stage 1 (World) online guide from January 2022 (as available for use by LASALLE students). NTU virtual workspace Stage 2 (Exploration) guidance (as used by NTU students and providing an indication of the type of guidance that would have been offered to LASALLE students for their Stage 2 work - although their project was much longer in duration). 3 Interview documentation Information sheet and consent form given to research participants. Interview questions for staff and students, shared with all participants in advance. 4 LASALLE staff interview Transcript of interview with Martin Bonney and Kathryn Shannon Sim Yen Ping (Lecturers in Fashion). 5 LASALLE student interviews Transcripts of interviews with three student groups, each identified by the number/letter of the Stage 1 World and Stage 2 Exploration they created (as listed on the project website Worlds and Explorations pages). 6 LASALLE student work Project work (Stage 1 Worlds and Stage 2 Explorations) created by the three student groups interviewed, as displayed on the project website. One group (World 154) did not submit their Exploration for the website. 7 NTU staff interview Transcript of interview with Lorraine Warde (Principal Lecturer in Fashion Design). 8 NTU student interviews Transcripts of interviews with three student groups, each identified by the number/letter of the Stage 2 Exploration they created (as listed on the project website Explorations page). 9 NTU student work Project work (Stage 2 Explorations) created by the three student groups interviewed. Two groups' work is as displayed on the project website. One group (World 95, Exploration X) did not submit their Exploration for the website and so their internal presentation has been included instead.

This report aims to provide concept designs to integrate the SunDial/TES system with the MANDREKAS and ArcelorMittal end-users. These concept designs are important to understand how the ASTEP system will be integrated with the end-users including the tailored designs for the specific needs of each end-user. The end-user specific ASTEP system is introduced and existing heating/cooling systems are explained in schematic diagrams. A small number of integration options are presented in detailed schematics. Possible integration components such as steam generator for MANDREKAS and pipe heater for ArcelorMittal are investigated at the component level. In addition, key fluid properties at the critical locations such as inlet and outlet of the components are summarised.

Slides presented at the 102 Annual American Meteorological Society Meeting, as part of the session "Major Weather Events and Impacts of 2021" (paper 6.3 - It's Getting Hot in Here: Real-Time Climate Fingerprints Applied to the 2021 Extreme Heat Season) For more information, please reach out to Daniel Gilford at dgilford@climatecentral.org. Presentation Abstract: Extreme heat was observed and experienced across large portions of the United States in 2021, including during notable record-breaking events in the Pacific Northwest, the Southwest, and along the East coast. The contiguous US experienced its hottest June on record, and excess heat related deaths stretched into the thousands. While more frequent and intense periods of extreme heat are expected consequences of anthropogenic climate change, rapidly and continuously assessing the degree to which human emissions of greenhouse gases increase the likelihood of a specific event remains a challenging technical process. In this study we introduce the Realtime Climate attribution framework and illustrate its application through an analysis of observed 2021 extreme heat events. The framework implements one model-based and two observation-based approaches to produce three distinct attribution assessments, including best estimates and uncertainties. The framework is designed to be flexible across a range of variables and scales, computationally lightweight, and adaptable for impact studies. Using a suite of global climate models, observed global mean temperatures, and local observed daily temperatures, we quantify the extent to which human-driven climate change made 2021 maximum and minimum daily temperature extremes more likely across the United States. Results confirm the continued and growing influence of human-driven climate change in local weather extremes. For instance, we find that the record-breaking high temperatures in June near Phoenix, AZ, were at least 3.25 times more likely because of human activity. Through this framework, we are building the capacity to produce attribution estimates while an event is unfolding. Furthermore, the ability to estimate attribution levels continuously will enhance studies of extreme heat impacts on human health, along with other socioeconomic or influences.

The database presents the scenario results of an exploratory research, carried out at the International Institute for Applied Systems Analysis (IIASA): the Low Energy Demand (LED) study (Grubler et al. 2018). The LED scenario explored how far transformative changes that combine technological changes, end-use efficiency, and new business models for energy service provision can lead for lowering energy demand, and how these changes could drive deep decarbonisation in the long-term. The scenario development methodology included a bottom-up analysis of how currently existing, though often embryonic, social, institutional, and technological trends could become mainstream with resulting step-changes in efficiency and resulting lowered energy demand. The bottom-up demand estimations were then further explored for their supply side and emissions and climate implications with a top-down modeling framework drawing on the Shared Socioeconomic Pathways (SSP) framework (Riahi et al. 2017). The results show that global final energy demands can be drastically reduced in 2050, to around 245 EJ/yr, or 40% lower than today, whilst significantly expanding human welfare and reducing global development inequalities. According to the knowledge of the authors, LED is the lowest long-term global energy demand scenario ever published. The LED scenario meets the 1.5°C climate target in 2100 without overshoot and keeps the global mean temperature increase below 1.5°C with a probability of more than 60%, without requiring controversial negative emission technologies, such as bioenergy with carbon capture and storage (BECCS), that figure prominently in the emission scenario literature (Rogelj et al. 2015, Anderson and Peters 2016, Creutzig et al. 2016, Smith et al. 2016). Furthermore, the beneficial impacts of the LED scenario on a range of other sustainable development goals are also shown, demonstrating that efficiency of energy services provision plays a critical role in reaching low-energy futures without compromising increased living standards in the Global South, while at the same time reducing adverse social and environmental impacts of climate mitigation strategies that focus predominantly on large-scale supply-side transformations. The research is published in a peer-reviewed article in Nature Energy (Grubler et al. 2018) with ample supplementary information. Water consumption and withdrawal data are published in Parkinson et al. (2018). The data is available for download from the LED Database. The content of the LED database and any derived analysis may only be used for non-commercial scientific publications, articles, educational purposes, figures and data tables provided that the source reference pursuant to section 'Required citation' is included and all relevant publications are correctly cited. Partial reproductions of the database content may be stored in online repositories, if this is necessary to comply with a journal's data archiving and access requirements. Such reproductions must be limited to the scope of the manuscript in question, and must include a hyperlink to the source database hosted at https://db1.ene.iiasa.ac.at/LEDDB and the download date from the source database. However, any wholesale duplication, translation, reworking, processing, arrangement, transformation, or reproduction through the internet or any other channels, of the https://db1.ene.iiasa.ac.at/LEDDEB for commercial or non-commercial purposes is not permitted without the explicit written approval of IIASA.

This research is supported by SEACAMS2 which is part-funded by the European Regional Development Fund and focuses on the convergence region of Wales. This particular research project is a follow on from a Fujitsu and HPC Wales (now Supercomputing Wales) funded PhD research project supervised by Dr Simon Neill, Bangor University. The tidal array representation method implemented in this modeling tool is based on a tidal turbine parameterisation method, accounting for the momentum capture for each individual device/array. This method is based upon the research described by Roc et al. 2013 & 2014. Each turbine behaviour is tuned via the drag coefficient, namely Ct, respectively relating to the thrust coefficient. This tidal array representation method has been implemented as a smeared drag-force at across user-defined depth layers within a large-scale ocean circulation modeling system that is the Regional Ocean Modeling System, ROMS. ROMS is an open-source 3-D model which solves the hydrostatic Navier-Stokes equations using a Boussinesq approximation on a structured horizontal grid with terrain following sigma layers[3]. Note that ROMS/TOMS version 3.7 - revision 898, is used in the current distribution of ROMS-Tidal Array. The turbine representation module is applied using the following files: roms_src/ROMS/External/varinfo.dat roms_src/ROMS/Include/cppdefs.h roms_src/ROMS/Nonlinear/initial.F roms_src/ROMS/Nonlinear/rhs3d.F roms_src/ROMS/Utility/def_info.F roms_src/ROMS/Utility/checkdefs.F roms_src/ROMS/Utility/wrt_info.F roms_src/ROMS/Utility/read_phypar.F roms_src/ROMS/Modules/mod_ncparam.F roms_src/ROMS/Modules/mod_iounits.F roms_src/ROMS/Modules/mod_arrays.F roms_src/ROMS/Modules/mod_trb.F Modification to ROMS src for the inclusion of tidal energy extraction

------------------------------------------------------------------------------------------------------------------------------------------- This version has been superseded. The latest version is at https://doi.org/10.5281/zenodo.5517550 ------------------------------------------------------------------------------------------------------------------------------------------- Eddy covariance flux tower datasets of all Urban-PLUMBER sites, associated with the manuscript: "Harmonized, gap-filled dataset from 20 urban flux tower sites" Use of any data must give credit through citation of the above manuscript and other sources as appropriate. We recommend data users consult with site contributing authors and/or the coordination team in the project planning stage. Relevant contacts are included in timeseries metadata. For site information and timeseries plots see https://urban-plumber.github.io/sites. For processing code see https://github.com/matlipson/urban-plumber_pipeline. Within each site folder: - `index.html`: A summary page with site characteristics and timeseries plots. - `SITENAME_sitedata_vX.csv`: comma seperated file for numerical site characteristics e.g. location, surface cover fraction etc. - `timeseries/` (following files available as netCDF and txt) - `SITENAME_raw_observations_vX`: site observed timeseries before project-wide quality control. - `SITENAME_clean_observations_vX`: site observed timeseries after project-wide quality control. - `SITENAME_metforcing_vX`: site observed timeseries after project-wide quality control and gap filling. - `SITENAME_era5_corrected_vX`: site ERA5 surface data (1990-2020) with bias corrections as applied in the final dataset. - `log_processing_SITENAME_vX.txt`: a log of the print statements through running the create_dataset_SITENAME scripts. Authors Mathew Lipson, Sue Grimmond, Martin Best, Andreas Christen, Andrew Coutts, Ben Crawford, Bert Heusinkveld, Erik Velasco, Helen Claire Ward, Hirofumi Sugawara, Je-Woo Hong, Jinkyu Hong, Jonathan Evans, Joseph McFadden, Keunmin Lee, Krzysztof Fortuniak, Leena Järvi, Matthias Roth, Nektarios Chrysoulakis, Nigel Tapper, Oliver Michels, Simone Kotthaus, Stevan Earl, Sungsoo Jo, Valéry Masson, Winston Chow, Wlodzimierz Pawlak, Yeon-Hee Kim. Corresponding author: Mathew Lipson <m.lipson@unsw.edu.au>

This report presents data on industrial energy demand, temperature ranges for industrial heat demand and quantitative potential of the application of SHIP systems to SPIRE and the food, dairy and tobacco industries.

This report covers the phase 1 (M18 report) of the System Boundaries and Functional Unit of the social life cycle assessment (S-LCA). The goal and scope of the S-LCA is described in detail so that the next phases of the S-LCA can be conducted accordingly.

Dataset and R code to run the thermal model for 1985-2019.