• Energy Research
• IN close
• AU close
• BE close

Abstract Hybrid nanofluids are a novel class of colloidal fluids which have drawn significant attention due to potential tailoring of their thermo-physical properties for heat transfer enhancement by a combination of more than one nano-additive to meet specific requirements of an application. In the present work, ceramic copper oxide/carbon (SiO2-CuO/C) nanoparticles in 80:20 (wt%) composition were prepared by ultrasonic-assisted wet mixing technique. The hybrid nanofluid was formulated by dispersing the nanoparticles into a base fluid mixture of 60:40 (% by mass) glycerol and ethylene glycol (G/EG) using the two-steps method. The influence of nanoparticles on the augmentation of specific heat, thermal conductivity and viscosity was examined in the volume concentration range of 0.5–2.0% in the temperature range of 303.15–353.15 K. The results demonstrate that the synthesized SiO2-CuO/C hybrid nanoparticles enhanced the thermo-physical properties of the base fluid mixture which is higher than using SiO2 alone. In the case of SiO2–G/EG nanofluid, the specific heat capacity decremented by a maximum value of 5.7% whereas the thermal conductivity and viscosity incremented by 6.9% and 1.33-times as compared with G/EG at maximum volume concentration of 2.0% at a temperature of 353.15 K. Comparatively, a reinforcement of 80% SiO2 with 20% CuO/C in G/EG mixture led to thermal conductivity and viscosity enhancement by 26.9% and 1.15-times, respectively with a significant reduction of specific heat by 21.1%. New empirical correlations were proposed based on the experimental data for evaluation of thermophysical properties.

ABSTRACTThe design of annular fin array with variable thickness fin profiles defined by B-spline curves is studied as a multi-objective optimization problem for simultaneously maximizing heat transfer rate and minimizing thermal stress. Maximization of surface efficiency and augmentation factor as well as minimization of fin volume are considered as additional objective functions for further assessment of fin array performance. Evaluating the objective values through hybrid spline difference method, different cases are investigated by solving the optimization model by non-dominated sorting genetic algorithm II. The proposed scheme should aid designers in selecting compromise optimal solutions for practical problems.

La production industrielle d'huile de palme génère simultanément une quantité substantielle de fibres de grappe de fruits vides (EFB) qui pourraient être utilisées comme matière première dans une bioraffinerie à base de lignocellulose. Les sous-produits de la lignine générés par ce processus peuvent offrir des possibilités d'isolation des produits à valeur ajoutée, tels que le p-hydroxybenzoate (pBz), pour aider à compenser les coûts d'exploitation. L'analyse de la lignine EFB par spectroscopie de résonance magnétique nucléaire (RMN) a clairement révélé la présence d'acétate lié et de pBz, la saponification révélant que 1,1 % en poids de l'EFB était du pBz ; avec une teneur en lignine de 22,7 %, 4,8 % de la lignine est du pBz qui peut être obtenu comme composant pur pour être utilisé comme charge chimique. L'analyse de la lignine EFB par RMN et dérivatisation suivie d'un clivage réducteur (DFRC) a montré que le pBz acylate sélectivement le groupe γ-hydroxyle des unités S. Cette sélectivité suggère que le pBz, de manière analogue à l'acétate dans le kénaf, le p-coumarate dans les graminées et le ferrate dans un peuplier transgénique augmenté d'une féruloyl-CoA monolignol transférase (FMT), est incorporé dans la chaîne de lignine en croissance via son conjugué monolignol γ-p-hydroxybenzoylé. L'implication de tels conjugués dans la lignification des palmiers est prouvée par l'observation de nouvelles unités couplées au β-β non résinol p-hydroxybenzoylé dans les lignines. Ensemble, les données impliquent l'existence de p-hydroxybenzoyl-CoA :monolignol transférases qui sont impliquées dans la lignification chez les différents saules (Salix spp.), peupliers et peupliers faux-trembles (Populus spp., famille des Salicacées) et palmiers (famille des Arecacées) qui ont des lignines p-hydroxybenzoylées. Même sans augmenter les niveaux par la sélection ou le génie génétique, les « déchets » actuels de l'EFB d'huile de palme devraient être en mesure de générer un flux important d'acide p-hydroxybenzoïque qui offre des opportunités pour le développement de produits à valeur ajoutée dérivés de l'industrie du palmier à huile. La producción industrial de aceite de palma genera simultáneamente una cantidad sustancial de fibras de racimo de frutas vacías (EFB) que podrían utilizarse como materia prima en una biorrefinería a base de lignocelulosa. Los subproductos de lignina generados por este proceso pueden ofrecer oportunidades para el aislamiento de productos de valor agregado, como el p-hidroxibenzoato (pBz), para ayudar a compensar los costos operativos. El análisis de la lignina EFB por espectroscopía de resonancia magnética nuclear (RMN) reveló claramente la presencia de acetato unido y pBz, y la saponificación reveló que el 1,1% en peso del EFB era pBz; con un contenido de lignina del 22,7 %, el 4,8 % de la lignina es pBz que se puede obtener como un componente puro para su uso como materia prima química. El análisis de la lignina EFB por RMN y la derivatización seguida de escisión reductora (DFRC) mostró que pBz acila selectivamente el grupo γ-hidroxilo de las unidades S. Esta selectividad sugiere que pBz, análogamente con acetato en kenaf, p-cumarato en gramíneas y ferular en un álamo transgénico aumentado con una feruloil-CoA monolignol transferasa (FMT), se incorpora a la cadena de lignina en crecimiento a través de su conjugado de monolignol γ-p-hidroxibenzoilado. La participación de dichos conjugados en la lignificación de la palma se demuestra al observar nuevas unidades no acopladas a β-β-resinol p-hidroxibenzoiladas en las ligninas. Juntos, los datos implican la existencia de p-hidroxibenzoil-CoA:monolignol transferasas que participan en la lignificación en los diversos sauces (Salix spp.), álamos y álamo temblón (Populus spp., familia Salicaceae) y palmeras (familia Arecaceae) que tienen ligninas p-hidroxibenzoiladas. Incluso sin mejorar los niveles mediante mejoramiento o ingeniería genética, los 'desechos' actuales de aceite de palma EFB deberían ser capaces de generar una corriente considerable de ácido p-hidroxibenzoico que ofrezca oportunidades para el desarrollo de productos de valor agregado derivados de la industria de la palma aceitera. The industrial production of palm oil concurrently generates a substantial amount of empty fruit bunch (EFB) fibers that could be used as a feedstock in a lignocellulose-based biorefinery. Lignin byproducts generated by this process may offer opportunities for the isolation of value-added products, such as p-hydroxybenzoate (pBz), to help offset operating costs. Analysis of the EFB lignin by nuclear magnetic resonance (NMR) spectroscopy clearly revealed the presence of bound acetate and pBz, with saponification revealing that 1.1 wt% of the EFB was pBz; with a lignin content of 22.7 %, 4.8 % of the lignin is pBz that can be obtained as a pure component for use as a chemical feedstock. Analysis of EFB lignin by NMR and derivatization followed by reductive cleavage (DFRC) showed that pBz selectively acylates the γ-hydroxyl group of S units. This selectivity suggests that pBz, analogously with acetate in kenaf, p-coumarate in grasses, and ferulate in a transgenic poplar augmented with a feruloyl-CoA monolignol transferase (FMT), is incorporated into the growing lignin chain via its γ-p-hydroxybenzoylated monolignol conjugate. Involvement of such conjugates in palm lignification is proven by the observation of novel p-hydroxybenzoylated non-resinol β–β-coupled units in the lignins. Together, the data implicate the existence of p-hydroxybenzoyl-CoA:monolignol transferases that are involved in lignification in the various willows (Salix spp.), poplars and aspen (Populus spp., family Salicaceae), and palms (family Arecaceae) that have p-hydroxybenzoylated lignins. Even without enhancing the levels by breeding or genetic engineering, current palm oil EFB 'wastes' should be able to generate a sizeable stream of p-hydroxybenzoic acid that offers opportunities for the development of value-added products derived from the oil palm industry. ينتج الإنتاج الصناعي لزيت النخيل في الوقت نفسه كمية كبيرة من ألياف مجموعة الفاكهة الفارغة (EFB) التي يمكن استخدامها كمادة وسيطة في مصفاة حيوية تعتمد على اللجينوسليلوز. قد توفر المنتجات الثانوية لليجنين الناتجة عن هذه العملية فرصًا لعزل المنتجات ذات القيمة المضافة، مثل p - hydroxybenzoate (pBz)، للمساعدة في تعويض تكاليف التشغيل. كشف تحليل اللجنين EFB بواسطة مطياف الرنين المغناطيسي النووي (NMR) بوضوح عن وجود أسيتات مرتبطة و pBz، مع كشف التصبن أن 1.1 ٪ بالوزن من EFB كان pBz ؛ مع محتوى اللجنين بنسبة 22.7 ٪، 4.8 ٪ من اللجنين عبارة عن pBz يمكن الحصول عليه كمكون نقي للاستخدام كمادة وسيطة كيميائية. أظهر تحليل اللجنين EFB بواسطة NMR والاشتقاق متبوعًا بالانقسام الاختزالي (DFRC) أن pBz يعمل بشكل انتقائي على أسيتيل مجموعة γ - hydroxyl من وحدات S. تشير هذه الانتقائية إلى أن pBz، بالتناظر مع الأسيتات في الكناف، و p - comarate في الأعشاب، و ferulate في حور معدّل وراثيًا معززًا بـ feruloyl - CoA monolignol transferase (FMT)، يتم دمجه في سلسلة اللجنين المتنامية عبر γ - p - hydroxybenzoylated monolignol conjugate. ثبت تورط مثل هذه المترافقات في ترصيع النخيل من خلال ملاحظة وحدات p - hydroxybenzoylated غير الراتينول β - β المقترنة في اللجنين. معا، تشير البيانات إلى وجود p - hydroxybenzoyl - CoA: monolignol transferases التي تشارك في تبييض في الصفصاف المختلفة (Salix spp.)، الحور والحور (Populus spp.، عائلة Salicaceae)، والنخيل (عائلة Arecaceae) التي تحتوي على p - hydroxybenzoylated lignins. حتى من دون تعزيز المستويات عن طريق التكاثر أو الهندسة الوراثية، يجب أن تكون "نفايات" زيت النخيل الحالية قادرة على توليد تيار كبير من حمض p - hydroxybenzoic الذي يوفر فرصًا لتطوير منتجات ذات قيمة مضافة مشتقة من صناعة نخيل الزيت.

Abstract The upward energy demand, along with the depletion of conventional energy sources, demands improved utilization of renewable energy resources. Among all renewable energy resources, solar energy is the most appropriate alternative to conventional energy sources owing to its inexhaustibility and green property. Solar collectors are devices that convert solar radiation into heat or energy. However, the efficiency of the solar collector is still not adequate. The competent step to enhance the efficiency of the solar collector is to use nanofluids. This study is carried out different phases viz. characterization and stabilization while both qualitative and quantitative methods used to evaluate the stability of nanofluids thermophysical properties of Al2O3 and CNC nanofluids such as thermal conductivity measured at four different temperature using KD2 Pro, viscosity and specific heat determined at similar temperature range by viscometer and differential scanning calorimetry respectively. The experiment is executed with a fixed flow rate and in steady-state conditions under extensive solar radiation. The experimental study has revealed that up to 2.48% and 8.46% efficiency of solar collector enhanced by using 0.5% Al2O3 and 0.5% CNC nanofluids respectively. Moreover, nanofluids show good to moderate stability performance. Besides, the thermal conductivity of nanofluids increased while viscosity is in a decreasing trend with increasing temperature. Nanofluids could enhance the efficiency of a flat-plate solar collector.

Abstract It is well known that Espinosa-parades et al. (Espinosa-Paredes et al., 2011) proposed a fractional neutron point kinetic (FNPK) model with multi-group of delayed neutrons to describe dynamic behavior in a nuclear reactor. In (Aboanber and Nahla, 2016b), Aboanber and Nahla presented an extension of Espinosa-parades et al. FNPK model. This new model is called as the corrected fractional neutron point kinetic (CFNPK) model. The present study is concerned with the numerical solution of the CFNPK model (Aboanber and Nahla, 2016b) with six groups of delayed neutron precursors. The fractional derivative is described in the sense of Grunwald-Letnikov. An implicit finite difference method (FDM) is constructed for the solution of CFNPK model. The stability analysis of the method is carried out. We analyze the results of neutron density for different values of anomalous diffusion order, reactivity function, relaxation time and time step size. In addition, we compare the results corresponding to CFNPK model (Aboanber and Nahla, 2016b) with the results corresponding to the FNPK model proposed by Espinosa-parades et al. (Espinosa-Paredes et al., 2011). It is shown that as anomalous diffusion order decreases or simulation time increases the difference between the values of neutron density increases. We have investigated the effects of each term of the CFNPK.

Abstract Emissions and efficiency of a pellet boiler (40 kW) at nominal load were compared with emissions and efficiency at reduced load, while fired with six biomass pellets. The pellets include reed canary grass ( Phalaris arundinacea ), pectin waste from citrus shells ( Citrus reticulata ), sunflower husk ( Helianthus annuus ), peat, wheat straw ( Triticum aestivum ) and wood pellets. The measurements of emissions comprised of carbon monoxide (CO), nitrogen oxides (NO x ), sulphur oxides (SO x ) and flue dust mass concentrations (using DIN plus and isokinetic sampling techniques). Emissions varied as a function of operational loads, for each type of pellets. The CO emissions were insignificant with reed canary grass (RCG), citrus pectin waste (CPW) and straw pellets at nominal load, however, at reduced load same pellets emitted 1.9, 4.0 and 7.4 times higher CO than wood pellets, respectively. Peat pellets emitted maximum CO at nominal load (4221.1 mgNm −3 , 12.6 times higher than wood pellets) however; at reduced load CO emission was insignificant. The highest NO x emissions were reported with CPW, which were 3.4 and 4.6 times higher than wood pellets at nominal load and reduced load, respectively. Dust emissions were highest with sunflower husk and lowest with RCG pellets, at both operational modes. The best performance was reported with wood pellets, followed by RCG and pectin pellets, however, wood pellets combustion emitted 1.7 and 2.0 times higher dust DIN plus than RCG at nominal and reduced loads, respectively. Not only fuel specific combustion optimization but also operational load specific optimization is essential for efficient use of agro-pellets in this type of boilers.

AbstractWe demonstrate the high concentration exfoliation of graphene nanosheets in dimethyl formamide (DMF) as a solvent from graphite powder. UV-Vis-NIR spectroscopy shows low power bath sonication yields less concentration of graphene nanosheets exfoliation, whereas the high power probe sonication yields high concentration graphene nanosheets exfoliation. The concentration of graphene nanosheets exfoliation depends on amount of energy supplied, and there exists a linear relationship between the concentration of graphene and energy supplied during sonication. TEM micrograph confirms the exfoliation of graphene nanosheets. AFM studies shows; high power sonication for longer time reveals graphene exfoliation with fewer graphene layers. The strategy of bath sonication followed by probe sonication of grapheme solution shows the stable suspension of graphene nanosheets even after one month.