- Hangyu Li; Ze Zhou; Tao Long; Yao Wei; Jianchun Xu;
Shuyang Liu; Shuyang Liu
Harvested from ORCID Public Data FileShuyang Liu in OpenAIRE Xiaopu Wang; Xiaopu Wang
Harvested from ORCID Public Data FileXiaopu Wang in OpenAIREThe U.S. Environmental Protection Agency’s (EPA) Superfund—the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) database—has collected and built an open-source database based on nearly 2000 US soil remediation cases since 1980, providing detailed information and references for researchers worldwide to carry out remediation work. However, the cases were relatively independent to each other, so the whole database lacks systematicness and instructiveness to some extent. In this study, the basic features of all 144 soil remediation projects in four major oil-producing states (California, Texas, Oklahoma and Alaska) were extracted from the CERCLA database and the correlations among the pollutant species, pollutant site characteristics and selection of remediation methods were analyzed using traditional and machine learning techniques. The Decision Tree Classifier was selected as the machine learning model. The results showed that the growth of new contaminated sites has slowed down in recent years; physical remediation was the most commonly used method, and the probability of its application is more than 80%. The presence of benzene, toluene, ethylbenzene and xylene (BTEX) substances and the geographical location of the site were the two most influential factors in the choice of remediation method for a specific site; the maximum weights of these two features reaches 0.304 and 0.288.
Access Routesgold 5 citations 5 popularity Top 10% influence Average impulse Top 10% 
Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15155698&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Hangyu Li; Ze Zhou; Tao Long; Yao Wei; Jianchun Xu; Shuyang Liu;
Shuyang Liu
Harvested from ORCID Public Data FileShuyang Liu in OpenAIRE Xiaopu Wang; Xiaopu Wang
Harvested from ORCID Public Data FileXiaopu Wang in OpenAIREThe U.S. Environmental Protection Agency’s (EPA) Superfund—the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) database—has collected and built an open-source database based on nearly 2000 US soil remediation cases since 1980, providing detailed information and references for researchers worldwide to carry out remediation work. However, the cases were relatively independent to each other, so the whole database lacks systematicness and instructiveness to some extent. In this study, the basic features of all 144 soil remediation projects in four major oil-producing states (California, Texas, Oklahoma and Alaska) were extracted from the CERCLA database and the correlations among the pollutant species, pollutant site characteristics and selection of remediation methods were analyzed using traditional and machine learning techniques. The Decision Tree Classifier was selected as the machine learning model. The results showed that the growth of new contaminated sites has slowed down in recent years; physical remediation was the most commonly used method, and the probability of its application is more than 80%. The presence of benzene, toluene, ethylbenzene and xylene (BTEX) substances and the geographical location of the site were the two most influential factors in the choice of remediation method for a specific site; the maximum weights of these two features reaches 0.304 and 0.288.
Access Routesgold 5 citations 5 popularity Top 10% influence Average impulse Top 10% Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15155698&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Wei Wei; Xuanlin Peng; Ruhai Li; Chaoshun Li;
Chaoshun Li
Harvested from ORCID Public Data FileChaoshun Li in OpenAIREThe electromagnetic vibration caused by electromagnetic force on the stator has threatened large hydro generators operating safely and stably. At the Zhexi hydropower station, the hydro generator was beset by electromagnetic vibration for a long time. Therefore, the paper provided a new method to help to find the vibration source and detect the hydro generator fault, through the combination of simulation and experiments. In this paper, the 3D stator pack structure model and the 2D hydro generator electromagnetic models under rotor eccentricity and rotor ellipse deformation conditions were built. Then, electromagnetism simulations were conducted to study the characteristics of the electromagnetic flux and electromagnetic force under different conditions by using the finite element method (FEM). Lastly, the vibration testing experiments and harmonic response simulations of stator frame were performed to present the characteristics of vibration distribution in frequency conditions. The simulation results were compared with the generator measured data to try to find out the main vibration source and guide the overhaul.
Access Routesgold 27 citations 27 popularity Top 10% influence Top 10% impulse Top 10% Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en10122155&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Wei Wei; Xuanlin Peng; Ruhai Li; Chaoshun Li;
Chaoshun Li
Harvested from ORCID Public Data FileChaoshun Li in OpenAIREThe electromagnetic vibration caused by electromagnetic force on the stator has threatened large hydro generators operating safely and stably. At the Zhexi hydropower station, the hydro generator was beset by electromagnetic vibration for a long time. Therefore, the paper provided a new method to help to find the vibration source and detect the hydro generator fault, through the combination of simulation and experiments. In this paper, the 3D stator pack structure model and the 2D hydro generator electromagnetic models under rotor eccentricity and rotor ellipse deformation conditions were built. Then, electromagnetism simulations were conducted to study the characteristics of the electromagnetic flux and electromagnetic force under different conditions by using the finite element method (FEM). Lastly, the vibration testing experiments and harmonic response simulations of stator frame were performed to present the characteristics of vibration distribution in frequency conditions. The simulation results were compared with the generator measured data to try to find out the main vibration source and guide the overhaul.
Access Routesgold 27 citations 27 popularity Top 10% influence Top 10% impulse Top 10% Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en10122155&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu In order to evaluate the displacement effect of four kinds of injection media in tight oil sandstone, water, active water, CO2, N2 flooding experiments were carried out in laboratory. Online Nuclear Magnetic Resonance (NMR) spectrometers combine the advantages of NMR technology and core displacement experiments. In the displacement experiment, NMR data of different injection volumes were obtained and magnetic resonance imaging (MRI) was carried out. The results showed that micro and sub-micropores provided 62–97% of the produced crude oil. The enhanced oil recovery ratio of active water flooding was higher than that of conventional water flooding up to 10%. The recovery ratio of gas flooding in micro and sub-micropores was 60–70% higher than that of water flooding. The recovery ratio of CO2 flooding was 10% higher than that of N2 flooding. The remaining oil was mainly distributed in pores larger than 0.1 μm. Under the same permeability level, the remaining oil saturation of cores after gas flooding was 10–25% lower than water flooding. From MRI images, the displacement effects from good to bad were as follows: CO2 flooding, N2 flooding, active water flooding, and conventional water flooding.
Access Routesgold 21 citations 21 popularity Top 10% influence Top 10% impulse Top 10% Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en11102836&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.euIn order to evaluate the displacement effect of four kinds of injection media in tight oil sandstone, water, active water, CO2, N2 flooding experiments were carried out in laboratory. Online Nuclear Magnetic Resonance (NMR) spectrometers combine the advantages of NMR technology and core displacement experiments. In the displacement experiment, NMR data of different injection volumes were obtained and magnetic resonance imaging (MRI) was carried out. The results showed that micro and sub-micropores provided 62–97% of the produced crude oil. The enhanced oil recovery ratio of active water flooding was higher than that of conventional water flooding up to 10%. The recovery ratio of gas flooding in micro and sub-micropores was 60–70% higher than that of water flooding. The recovery ratio of CO2 flooding was 10% higher than that of N2 flooding. The remaining oil was mainly distributed in pores larger than 0.1 μm. Under the same permeability level, the remaining oil saturation of cores after gas flooding was 10–25% lower than water flooding. From MRI images, the displacement effects from good to bad were as follows: CO2 flooding, N2 flooding, active water flooding, and conventional water flooding.
Access Routesgold 21 citations 21 popularity Top 10% influence Top 10% impulse Top 10% Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en11102836&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu- Access Routes
gold 15 citations 15 popularity Top 10% influence Top 10% impulse Top 10% Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en12030502&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Access Routes
gold 15 citations 15 popularity Top 10% influence Top 10% impulse Top 10% Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en12030502&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Jayanthi Velayudhan;
Jayanthi Velayudhan
Harvested from ORCID Public Data FileJayanthi Velayudhan in OpenAIRE Sangeetha Subramanian; Sangeetha Subramanian
Harvested from ORCID Public Data FileSangeetha Subramanian in OpenAIREA manganese oxide-coated cylindrical graphite cathode with a zinc anode was developed to treat wastewater containing selenite in a dual-chambered microbial fuel cell. COD and selenite removal in the anodic chamber by Bacillus cereus with energy generation were evaluated in batch mode. A manganese dioxide-coated graphite cathode was tested for its surface morphology and chemical composition using scanning electron microscopy and dispersive energy analysis of X-rays. Compared to the non-coated graphite electrode, up to 69% enhancement was observed in the manganese dioxide-coated electrode voltage generation with 150 ppm selenite concentration. The fuel cell achieved a maximum power density of 1.29 W/m2 with 91% selenite reduction and up to 74% COD (initial COD of 120 mg/L) removal for an initial selenite concentration from 100 to 150 ppm. The current study demonstrated the possibility of a modified cathode in enhancing energy generation and the use of microbial fuel cell technology to treat wastewater containing selenite.
Access Routesgold 2 citations 2 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en16062880&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Jayanthi Velayudhan;
Jayanthi Velayudhan
Harvested from ORCID Public Data FileJayanthi Velayudhan in OpenAIRE Sangeetha Subramanian; Sangeetha Subramanian
Harvested from ORCID Public Data FileSangeetha Subramanian in OpenAIREA manganese oxide-coated cylindrical graphite cathode with a zinc anode was developed to treat wastewater containing selenite in a dual-chambered microbial fuel cell. COD and selenite removal in the anodic chamber by Bacillus cereus with energy generation were evaluated in batch mode. A manganese dioxide-coated graphite cathode was tested for its surface morphology and chemical composition using scanning electron microscopy and dispersive energy analysis of X-rays. Compared to the non-coated graphite electrode, up to 69% enhancement was observed in the manganese dioxide-coated electrode voltage generation with 150 ppm selenite concentration. The fuel cell achieved a maximum power density of 1.29 W/m2 with 91% selenite reduction and up to 74% COD (initial COD of 120 mg/L) removal for an initial selenite concentration from 100 to 150 ppm. The current study demonstrated the possibility of a modified cathode in enhancing energy generation and the use of microbial fuel cell technology to treat wastewater containing selenite.
Access Routesgold 2 citations 2 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en16062880&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Guopeng Luo; Kai Zhang; Yaqi Peng; Jinjin Wang; Shengyong Lu; Qunxing Huang; Jianhua Yan;
Jianhua Yan
Harvested from ORCID Public Data FileJianhua Yan in OpenAIREA 1000 Nm3/h capacity pilot scale dual baghouse filter system was tested on flue gas and fly ash from a municipal solid waste incinerator, and the removal efficiency of dioxins, heavy metals and HCl was studied. Activated carbon was injected at the inlet of the first baghouse filter to remove the gas phase dioxins and heavy metals, and baking soda was injected at the inlet of the second baghouse filter to remove HCl. Concentrations of dioxins at the outlet of the first and second baghouse were 0.034 and 0.011 ng TEQ/Nm3, respectively, which were both far below the national emission standard. The particulate matter concentration was 0.85 mg/m3, and the heavy metals leaching concentration of the fly ash from the second baghouse filter was lower than the hazardous waste identification standard. HCl concentration was almost zero at the outlet of the second baghouse filter when the optimal equivalence ratio of baking soda to HCl was 1.6. In addition, the estimated fly ash yield was 2.35% of the incinerated solid waste for the dual baghouse filter system, which was significantly lower than 3.5% as the traditional semidry scrubber + single baghouse filter.
Access Routesgold 0 citations 0 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15103728&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Guopeng Luo; Kai Zhang; Yaqi Peng; Jinjin Wang; Shengyong Lu; Qunxing Huang; Jianhua Yan;
Jianhua Yan
Harvested from ORCID Public Data FileJianhua Yan in OpenAIREA 1000 Nm3/h capacity pilot scale dual baghouse filter system was tested on flue gas and fly ash from a municipal solid waste incinerator, and the removal efficiency of dioxins, heavy metals and HCl was studied. Activated carbon was injected at the inlet of the first baghouse filter to remove the gas phase dioxins and heavy metals, and baking soda was injected at the inlet of the second baghouse filter to remove HCl. Concentrations of dioxins at the outlet of the first and second baghouse were 0.034 and 0.011 ng TEQ/Nm3, respectively, which were both far below the national emission standard. The particulate matter concentration was 0.85 mg/m3, and the heavy metals leaching concentration of the fly ash from the second baghouse filter was lower than the hazardous waste identification standard. HCl concentration was almost zero at the outlet of the second baghouse filter when the optimal equivalence ratio of baking soda to HCl was 1.6. In addition, the estimated fly ash yield was 2.35% of the incinerated solid waste for the dual baghouse filter system, which was significantly lower than 3.5% as the traditional semidry scrubber + single baghouse filter.
Access Routesgold 0 citations 0 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15103728&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Access Routes
gold 1 citations 1 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15103770&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Access Routes
gold 1 citations 1 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15103770&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Zhenhua Xu; Lianwu Zhou; Shuiping Ma; Jianxun Qin; +5 Authors
Zhenhua Xu
Harvested from ORCID Public Data FileZhenhua Xu in OpenAIRE Zhenhua Xu; Lianwu Zhou; Shuiping Ma; Jianxun Qin; Xiaodi Huang; Bo Han; Longqing Yang; Yun Luo;Zhenhua Xu
Harvested from ORCID Public Data FileZhenhua Xu in OpenAIRE Pengcheng Liu; Pengcheng Liu
Harvested from ORCID Public Data FilePengcheng Liu in OpenAIREHeavy oil reservoirs are often characterized by high viscosity and poor mobility, which is more complex with the presence of bottom water. The conventional vertical well development method has low oil recovery efficiency and limited controlled reserves of a single well. In addition, water cut can increase dramatically when the edge-bottom water breaks through. Horizontal well and CO2 huff-n-puff is an effective alternative development model for heavy oil reservoirs. This development method makes efficient use of CO2 and accords with the “Carbon Capture, Utilization, and Storage (CCUS)”. The horizontal well can increase the drainage area. The dissolution of CO2 improves the mobility of crude oil and increases formation energy. In this paper, we established numerical simulation models based on the Liuguanzhuang oilfield in Dagang. The characteristics and producing rules of the horizontal well and CO2 huff-n-puff development in the heavy oil reservoir were studied. The results show that the production characteristics of horizontal well and CO2 huff-n-puff were similar to Steam-Assisted Gravity Drainage (SAGD). CO2 forms a viscosity reduction area above the horizontal well and the heavy oil flows into the wellbore due to gravity after viscosity reduction. The CO2 huff-n-puff can effectively enhance the production area of horizontal wells compared with the depletion development. However, the improvement in the production area gradually decreased as CO2 huff-n-puff cycles continued. There was a boundary of production area against the horizontal well, with the main production of heavy oil occurring at the upper and either end of the horizontal well. The CO2 huff-n-puff has a restraining effect on the edge-bottom water, which is confirmed via the proposed theoretical model.
Access Routesgold 4 citations 4 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en16114258&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Zhenhua Xu; Lianwu Zhou; Shuiping Ma; Jianxun Qin; +5 Authors
Zhenhua Xu
Harvested from ORCID Public Data FileZhenhua Xu in OpenAIRE Zhenhua Xu; Lianwu Zhou; Shuiping Ma; Jianxun Qin; Xiaodi Huang; Bo Han; Longqing Yang; Yun Luo;Zhenhua Xu
Harvested from ORCID Public Data FileZhenhua Xu in OpenAIRE Pengcheng Liu; Pengcheng Liu
Harvested from ORCID Public Data FilePengcheng Liu in OpenAIREHeavy oil reservoirs are often characterized by high viscosity and poor mobility, which is more complex with the presence of bottom water. The conventional vertical well development method has low oil recovery efficiency and limited controlled reserves of a single well. In addition, water cut can increase dramatically when the edge-bottom water breaks through. Horizontal well and CO2 huff-n-puff is an effective alternative development model for heavy oil reservoirs. This development method makes efficient use of CO2 and accords with the “Carbon Capture, Utilization, and Storage (CCUS)”. The horizontal well can increase the drainage area. The dissolution of CO2 improves the mobility of crude oil and increases formation energy. In this paper, we established numerical simulation models based on the Liuguanzhuang oilfield in Dagang. The characteristics and producing rules of the horizontal well and CO2 huff-n-puff development in the heavy oil reservoir were studied. The results show that the production characteristics of horizontal well and CO2 huff-n-puff were similar to Steam-Assisted Gravity Drainage (SAGD). CO2 forms a viscosity reduction area above the horizontal well and the heavy oil flows into the wellbore due to gravity after viscosity reduction. The CO2 huff-n-puff can effectively enhance the production area of horizontal wells compared with the depletion development. However, the improvement in the production area gradually decreased as CO2 huff-n-puff cycles continued. There was a boundary of production area against the horizontal well, with the main production of heavy oil occurring at the upper and either end of the horizontal well. The CO2 huff-n-puff has a restraining effect on the edge-bottom water, which is confirmed via the proposed theoretical model.
Access Routesgold 4 citations 4 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en16114258&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Sajna Parimita Panigrahi; Sarat Kumar Maharana; Thejaraju Rajashekaraiah; Ravichandran Gopalashetty; +4 Authors
Ravichandran Gopalashetty
Harvested from ORCID Public Data FileRavichandran Gopalashetty in OpenAIRESajna Parimita Panigrahi; Sarat Kumar Maharana; Thejaraju Rajashekaraiah; Ravichandran Gopalashetty; Ravichandran Gopalashetty
Harvested from ORCID Public Data FileRavichandran Gopalashetty in OpenAIRE Mohsen Sharifpur; Mohsen Sharifpur
Harvested from ORCID Public Data FileMohsen Sharifpur in OpenAIRE Mohammad Hossein Ahmadi; Mohammad Hossein Ahmadi
Harvested from ORCID Public Data FileMohammad Hossein Ahmadi in OpenAIRE C. Ahamed Saleel; C. Ahamed Saleel
Harvested from ORCID Public Data FileC. Ahamed Saleel in OpenAIRE Mohamed Abbas; Mohamed Abbas
Harvested from ORCID Public Data FileMohamed Abbas in OpenAIREEngineering applications including food processing, wastewater treatment, home heating, commercial heating, and institutional heating successfully use unglazed transpired solar collectors (UTCs). Trapping of solar energy is the prime goal of developing an unglazed transpired solar collector. The UTC is usually developed in and around the walls of the building and absorbs the solar energy to heat the air. One of the key challenges faced by the UTC designer is the prediction of performance and its warranty under uncertain operating conditions of flow variables. Some of the flow features are the velocity distribution, plate temperature, exit temperature and perforation location. The objective of the present study was to establish correlations among these flow features and demonstrate a method of predicting the performance of the UTC. Hence, a correlation matrix was generated from the dataset prepared after solving the airflow over a perforated flat UTC. Further, both strong and weak correlations of flow features were captured through Pearson’s correlation coefficient. A comparison between the outcomes from a linear regression model and that of computational simulation was showcased. The performance probability for the UTC was interlinked with correlation matrix data. The Monte Carlo simulation was used to predict the performance from random values of the flow parameters. The study showed that the difference between the free stream value of temperature and the value of temperature inside the UTC’s chamber varied between 15 and 20 °C. The probability of achieving system efficiency greater than 35% was 55.2%. This has raised the hope of recommending the UTC for drying and heating where the required temperature differential is within 20 °C.
Access RoutesGreen gold 3 citations 3 popularity Top 10% influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15238843&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Sajna Parimita Panigrahi; Sarat Kumar Maharana; Thejaraju Rajashekaraiah; Ravichandran Gopalashetty; +4 Authors
Ravichandran Gopalashetty
Harvested from ORCID Public Data FileRavichandran Gopalashetty in OpenAIRESajna Parimita Panigrahi; Sarat Kumar Maharana; Thejaraju Rajashekaraiah; Ravichandran Gopalashetty; Ravichandran Gopalashetty
Harvested from ORCID Public Data FileRavichandran Gopalashetty in OpenAIRE Mohsen Sharifpur; Mohsen Sharifpur
Harvested from ORCID Public Data FileMohsen Sharifpur in OpenAIRE Mohammad Hossein Ahmadi; Mohammad Hossein Ahmadi
Harvested from ORCID Public Data FileMohammad Hossein Ahmadi in OpenAIRE C. Ahamed Saleel; C. Ahamed Saleel
Harvested from ORCID Public Data FileC. Ahamed Saleel in OpenAIRE Mohamed Abbas; Mohamed Abbas
Harvested from ORCID Public Data FileMohamed Abbas in OpenAIREEngineering applications including food processing, wastewater treatment, home heating, commercial heating, and institutional heating successfully use unglazed transpired solar collectors (UTCs). Trapping of solar energy is the prime goal of developing an unglazed transpired solar collector. The UTC is usually developed in and around the walls of the building and absorbs the solar energy to heat the air. One of the key challenges faced by the UTC designer is the prediction of performance and its warranty under uncertain operating conditions of flow variables. Some of the flow features are the velocity distribution, plate temperature, exit temperature and perforation location. The objective of the present study was to establish correlations among these flow features and demonstrate a method of predicting the performance of the UTC. Hence, a correlation matrix was generated from the dataset prepared after solving the airflow over a perforated flat UTC. Further, both strong and weak correlations of flow features were captured through Pearson’s correlation coefficient. A comparison between the outcomes from a linear regression model and that of computational simulation was showcased. The performance probability for the UTC was interlinked with correlation matrix data. The Monte Carlo simulation was used to predict the performance from random values of the flow parameters. The study showed that the difference between the free stream value of temperature and the value of temperature inside the UTC’s chamber varied between 15 and 20 °C. The probability of achieving system efficiency greater than 35% was 55.2%. This has raised the hope of recommending the UTC for drying and heating where the required temperature differential is within 20 °C.
Access RoutesGreen gold 3 citations 3 popularity Top 10% influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15238843&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Sifeng Zhang; Guozhang Ren; Guojian Zhang; Ziyin Ren; +2 Authors
Guojian Zhang
Harvested from ORCID Public Data FileGuojian Zhang in OpenAIRESifeng Zhang; Guozhang Ren; Guojian Zhang; Ziyin Ren; Chong Xia; Yuan Gao;Guojian Zhang
Harvested from ORCID Public Data FileGuojian Zhang in OpenAIREMining coal, oil and other energy will form much slope engineering, such as open-pit mine slope and oil depot slope. The groundwater seepage seriously affects the stability of these slope engineering projects. Drainage pipes are commonly used in slope engineering projects to reduce the risk of moisture decreasing soil stability. Such pipes are prone to blockage by soil accumulation after a period of operation, resulting in decreased drainage or complete failure. By installing fibre bundles in drainage pipes, drainage can be maintained under soil ingress. This paper conducted particle flow simulations of the influences of soil particles on the clogging of geotextile filters and drainage pipes under various influences and estimated their seepage rates. Higher water pressure, smaller flower hole intervals in the pipe, greater soil friction angles and smaller pipe inclination angles are less conducive to drainage. Under silting conditions, the seepage and drainage performance of a drainage pipe can be improved by installing a fibre bundle. Five types of fibre bundles were tested with plastic rope providing the best drainage effect. With plastic rope and cotton rope, the best drainage is achieved using uneven arrangements of fibre bundles. In contrast, nylon rope, hemp rope and polyester rope perform best when uniformly arranged. The greater the number of fibre bundles per unit cross-sectional area of pipe, the better the seepage conductivity. Seepage is also greater when the soil in the pipe has a higher sand content. These results provide a reference for the design and construction of more reliable drainage systems for slope engineering in wet areas.
Access Routesgold 1 citations 1 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15197270&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu - Sifeng Zhang; Guozhang Ren; Guojian Zhang; Ziyin Ren; +2 Authors
Guojian Zhang
Harvested from ORCID Public Data FileGuojian Zhang in OpenAIRESifeng Zhang; Guozhang Ren; Guojian Zhang; Ziyin Ren; Chong Xia; Yuan Gao;Guojian Zhang
Harvested from ORCID Public Data FileGuojian Zhang in OpenAIREMining coal, oil and other energy will form much slope engineering, such as open-pit mine slope and oil depot slope. The groundwater seepage seriously affects the stability of these slope engineering projects. Drainage pipes are commonly used in slope engineering projects to reduce the risk of moisture decreasing soil stability. Such pipes are prone to blockage by soil accumulation after a period of operation, resulting in decreased drainage or complete failure. By installing fibre bundles in drainage pipes, drainage can be maintained under soil ingress. This paper conducted particle flow simulations of the influences of soil particles on the clogging of geotextile filters and drainage pipes under various influences and estimated their seepage rates. Higher water pressure, smaller flower hole intervals in the pipe, greater soil friction angles and smaller pipe inclination angles are less conducive to drainage. Under silting conditions, the seepage and drainage performance of a drainage pipe can be improved by installing a fibre bundle. Five types of fibre bundles were tested with plastic rope providing the best drainage effect. With plastic rope and cotton rope, the best drainage is achieved using uneven arrangements of fibre bundles. In contrast, nylon rope, hemp rope and polyester rope perform best when uniformly arranged. The greater the number of fibre bundles per unit cross-sectional area of pipe, the better the seepage conductivity. Seepage is also greater when the soil in the pipe has a higher sand content. These results provide a reference for the design and construction of more reliable drainage systems for slope engineering in wet areas.
Access Routesgold 1 citations 1 popularity Average influence Average impulse Average Powered by BIP!add ClaimPlease grant OpenAIRE to access and update your ORCID works.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.This Research product is the result of merged Research products in OpenAIRE.
You have already added works in your ORCID record related to the merged Research product.<script type="text/javascript"> <!-- document.write('<div id="oa_widget"></div>'); document.write('<script type="text/javascript" src="https://beta.openaire.eu/index.php?option=com_openaire&view=widget&format=raw&projectId=10.3390/en15197270&type=result"></script>'); --> </script>For further information contact us at helpdesk@openaire.eu
- 1
- 2
- 3
- 4
- 5
