• Energy Research
• 12. Responsible consumption close
• DE close
• FR close
• IN close
• Energy Procedia close

AbstractThe future European energy supply system will have a high share of renewable energy sources (RES) to meet the greenhouse gas emission policy of the European Commission. Such a system is characterized by the need for a strongly interconnected energy transport grid as well as a high demand of energy storage capacities to compensate the time fluctuating characteristic of most RE generation technologies. With the RE generators at the location of high harvest potential, the appropriate dimension of storage and transmission system between different regions, a cost efficient system can be achieved. To find the preferred target system, the optimization tool GENESYS (Genetic Optimization of a European Energy System) was developed. The example calculations under the assumption of 100% self-supply, show a need of about 2,500 GW RES in total, a storage capacity of about 240,000 GWh, corresponding to 6% of the annual energy demand, and a HVDC transmission grid of 375,000 GWkm. The combined cost for generation, storage and transmission excluding distribution, was estimated to be 6.87 ct/kWh.

The European Geosciences Union (EGU) brings together geoscientists from all over the world covering all disciplines of the Earth, planetary and space sciences. This geoscientific interdisciplinarity is needed to tackle the challenges of the future. One major challenge for humankind is to provide adequate and reliable supplies of affordable energy and other resources in efficient and environmentally sustainable ways. This Energy Procedia issue provides an overview of the contributions of the Division on Energy, Resources & the Environment (ERE) at the EGU General Assembly 2017.

AbstractThe European Union aspires to reducing the import dependency of raw materials that are critical to its industries. In this respect, mineral resource information and data sharing by European Geological Surveys is crucial. In 2010, the European Commission identified 14 critical non-energy non-agricultural raw materials. This list was updated in 2014. This article presents the Critical Raw Material (CRM) Map of Europe produced by EuroGeoSurvey's Mineral Resources Expert Group. This map shows European mineral deposits from the EU FP7 ProMine project database, as containing critical commodities, according to the list of CRM published by the European Commission.

Abstract Ventilation systems are of vital importance for buildings, not only to provide acceptable thermal conditions and air quality for occupants, but also with regards to energy usage. Impinging jets can be encountered in many ventilation strategies which have major impacts on the acoustic environment and energy performance. The self-sustaining tones can be generated in such applications where a feedback loop is installed in the system. This phenomenon is explained by the corollary of Howe who shows that the origin of noise in such configurations can be attributed to fluid rotations. Howe highlights the role of phase conditions between the vorticity, the velocity of the flow and the acoustic velocity for the optimization of energy transfers between the turbulent kinetic energy and the sound field. In this work, we use 2D-PIV technique and a microphone respectively to measure the kinematic fields simultaneously with the acoustic generation for a rectangular jet impinging on a slotted plate. This study aims to investigate the transfers between the turbulent kinetic energy and the sound field for two Reynolds numbers presenting a high and a low noise levels. It is shown that phase conditions are necessary for the optimization of energy transfer which allows the installation of the self-sustained loop in the flow. It was found also that the change of the aerodynamic mode which is directly related to the self-sustained frequency amplifies the sound intensity and promotes the transfer of energy to the acoustic field.

AbstractWorld-wide coal reserves can supply the global demand for primary energy for several centuries. However, low thickness and structural complexity may constrain the economic exploitation of many coal deposits. Taking into account these circumstances, underground coal gasification (UCG) can offer an economical and sustainable approach for coal exploitation and subsequent feedstock generation from the syngas. The UCG process produces a high-calorific synthesis gas mainly consisting of methane, hydrogen and carbon dioxide, which can be used for electricity generation or feedstock production at the surface. Considering the latter, the Urea process can be applied to establish the nitrogen based fertilizer carbamide (CH4N2O). The required feedstock for carbamide production in the Urea process can be supplied by UCG syngas. The aim of the present study was the development of an integrated carbon utilisation concept based on the coupled UCG-Urea process. A significant amount of carbon dioxide from the UCG synthesis gas is required for carbamide production in the Urea process, while the excessive carbon dioxide can be re-injected into the cavities resulting in the coal seams and surrounding strata after the gasification process. Thus, a new approach for utilisation of carbon dioxide resulting from coal combustion was developed to provide a coupled technology also comprising geological storage of excessive carbon dioxide. A theoretical feasibility study considering UCG-Urea process economics and potentials of UCG and carbon dioxide storage in the gasified strata was conducted for a selected study area in northern Bangladesh revealing the high competitiveness of the combined technology on the international feedstock markets.

AbstractThe International Energy Agency Energy Technologies Perspectives (ETP) model is used for the assessment of the prospects for carbon abatement options, including carbon capture and storage, up to 2050. Three main scenarios are considered: a baseline scenario with current energy policies, an accelerated technology scenario (ACT) with an associated CO2 reduction incentive development, and a scenario in which global greenhouse gas emissions are reduced by 50% compared to current levels in 2050 (BLUE). The analysis suggests that CCS can account for up to 19% of all CO2 reduction in 2050, which would equal 10.4 Gt CO2 capture and storage. The power sector would account for 54% of all CCS, the remainder is in manufacturing industry and the fuel transformation sector.CCS is a critical option. Without CCS, the cost to meet the same target would rise by 71%. The potential rate at which CCS can be introduced exceeds the rate at which regular capital stock is typically replaced, if plants are retrofitted or closed down before the end of their technical life span. Retrofitting of coal plants with CCS plays a very significant role in the ACT Map scenario. But at the price of USD 200/t CO2 envisaged in the BLUE scenario, there is sufficient economic incentive to accelerate the replacement of inefficient power plants with new plants equipped with CCS before the existing plants reach the end of their life span. In the BLUE scenario, 350 GW of coal-fired power-plant capacity is closed down early. The remaining 700 GW consists of 80% new capacity that is equipped with CCS, and 20% retrofits with CCS.Following IEA recommendations, the G8 countries have announced that they will commit 20 demonstration plants for CCS by 2010. Also the G8, China India and Korea have asked the IEA to continue its work on roadmaps and transition paths for CCS in power generation and in industry, in cooperation with other bodies such as CSLF. This work has started and final results will be reported in 2010.

Abstract The cement manufacturing is the one of the factors that pollutes the atmosphere in the industrial sector. The common way to reduce this pollution is using mineral additives as partial replacement of Portland cement. Particularly, natural pozzolana (NP) is a component in which they can be used to decrease the rate of pollution. The main objective of this experimental work is the study of the effect of substituting cement with natural pozzolana up to 40% on compressive-flexural strength and capillary water absorption of cement mortar. Validation of the results was performed by early age and long term tests. Tests of isothermal calorimetry on paste specimens, and of Mercury intrusion porosimetry on mortar specimens, were performed. The results obtained in the present research showed that the higher dosages of natural pozzolana added could be the principal parameter of such decrease in strength at early and medium term. Further, this increase of incorporated addition has been believed to reduce the capillary water absorption.