• Energy Research
• engineering and technology close
• IN close
• KR close

Due to their high surface areas and large pore volumes, porous carbons (PCs) are valuable materials for use as electrodes in energy storage and conversion devices. Biomass is an ideal precursor for the preparation of PCs in part because it is sustainable and eco-friendly. Herein, new methodology for converting agarose, a naturally occurring type of biomass that forms robust hydrogels, into PCs with tunable pore structures and high electrochemical performance is described. The synthetic process is straightforward and entails heating a gel that is composed of agarose and potassium oxalate (K 2 C 2 O 4 ). Since the salt transforms into gaseous byproducts at elevated temperatures, the decomposition process was harnessed to create activated, open pores as the hydrogel underwent carbonization. For example, a PC with a surface area of 1754.9 m 2 g –1 and a pore volume of 2.643 cm 3 g –1 was obtained by heating a mixture of agarose and K 2 C 2 O 4 in a 1:3 weight ratio at 700 °C. The material was subsequently used as the electrode material in a supercapacitor and found to display a specific capacitance of 166.0 F g –1 at 0.125 A g –1 . Varying the quantity of added K 2 C 2 O 4 resulted in predictable changes in porosity and thus offered a means to tune the textural properties and the electrochemical performance of the PCs. For example, changing the feed ratio of agarose to K 2 C 2 O 4 to 1:6 afforded a PC that exhibited a high persistent specific capacitance (64.1 F g –1 at 5 A g –1 after 10,000 cycles) and a high-power density (20 kW kg –1 at 10 A g –1 ).

AbstractThis paper presents an understanding of the fundamental carrier transport mechanism in hydrogenated amorphous silicon (a‐Si:H)‐based n/p junctions. These n/p junctions are, then, used as tunneling and recombination junctions (TRJ) in tandem solar cells, which were constructed by stacking the a‐Si:H‐based solar cell on the heterojunction with intrinsic thin layer (HIT) cell. First, the effect of activation energy (Ea) and Urbach parameter (Eu) of n‐type hydrogenated amorphous silicon (a‐Si:H(n)) on current transport in an a‐Si:H‐based n/p TRJ has been investigated. The photoluminescence spectra and temperature‐dependent current–voltage characteristics in dark condition indicates that the tunneling is the dominant carrier transport mechanism in our a‐Si:H‐based n/p‐type TRJ. The fabrication of a tandem cell structure consists of an a‐Si:H‐based top cell and an HIT‐type bottom cell with the a‐Si:H‐based n/p junction developed as a TRJ in between. The development of a‐Si:H‐based n/p junction as a TRJ leads to an improved a‐Si:H/HIT‐type tandem cell with a better open circuit voltage (Voc), fill factor (FF), and efficiency. The improvements in the cell performance was attributed to the wider band‐tail states in the a‐Si:H(n) layer that helps to an enhanced tunneling and recombination process in the TRJ. The best photovoltage parameters of the tandem cell were found to be Voc = 1430 mV, short circuit current density = 10.51 mA/cm2, FF = 0.65, and efficiency = 9.75%. Copyright © 2015 John Wiley & Sons, Ltd.

Improving access to safe drinking water can result in multi-dimensional impacts on people's livelihood. This has been aptly reflected in the Millennium Development Goals (MDG) as one of the major objectives. Despite the availability of diverse and complex set of technologies for water purification, pragmatic and cost-effective use of the same is impeding the use of available sources of water. Hence, in country like India simple low-energy technologies such as solar still are likely to succeed. Solar stills would suffice the basic minimum drinking water requirements of man. Solar stills use sunlight, to kill or inactivate many, if not all, of the pathogens found in water. This paper provides an integrated assessment of the suitability of domestic solar still as a viable safe water technology for India. Also an attempt has been made to critically assess the operational feasibility and costs incurred for using this technology in rural India.

Cable structure is a major component of long-span bridges, such as cable-stayed and suspension bridges, and it transfers the main loads of bridges to the pylons. As these cable structures are exposed to continuous external loads, such as vehicle and wind loads, vibration control and continuous monitoring of the cable are required. In this study, an electromagnetic (EM) damper was designed and fabricated for vibration control and monitoring of the cable structure. EM dampers, also called regenerative dampers, consist of permanent magnets and coils. The electromagnetic force due to the relative motion between the coil and the permanent magnet can be used to control the vibration of the structure. The electrical energy can be used as a power source for the monitoring system. The effects of the design parameters of the damper were numerically analyzed and the damper was fabricated. The characteristics of the damper were analyzed with various external load changes. Finally, the vibration-control and energy-harvesting performances of the cable structure were evaluated through a hybrid simulation. The vibration-control and energy-harvesting performances for various loads were analyzed and the applicability to the cable structure of the EM damper was evaluated.

Abstract Globally, three-quarter of a billion people live without electricity. Besides, hundreds of million use a solar lantern for less than 4 h a day. Most of the access-deprived are in the Global South, predominantly in Sub-Saharan Africa and South Asia. The United Nations framed the seventh Sustainable Development Goal to improve access. Solar photovoltaic powered mini-grids are increasingly extending better service to deprived regions. However, poor load-factor and expensive storage adversely affect viability. Also, these mini-grids do not support infrequent large loads to avoid further loss of load-factor. Electric cooking is efficient and non-polluting; water treatment facilities can save millions from contaminant and pathogen by providing clean water. Besides, both electric cooking and water treatment are less expensive than alternatives. But mini-grids frequently do not support these. Indeed, the presence of sustained productive loads favourably influences the mini-grid economy. This study investigates the role of critical household loads to deliver similar bearing on the mini-grid economy. Results underscore realisation of desirable impact with household collaboration under a demand-response program. Collaborative consumption can lower initial investment by 62% and reduce the unit energy cost to $0.23. Also, cooperation improves the mini-grid load factor and promotes viability. Additionally, fast deployment needs during and after Covid-19 remains inherently supported while mitigating the pandemic induced financial stress of both consumer and mini-grid operator. This study of 88 nation-states underscores that demand response in a mini-grid can not only improve affordability for all consumers, but it can also bring 186 million people within affordable access.

Abstract Liquefaction of poly-isoprene based rubber (PIR) was performed using ethanol as a solvent for the production of liquid fuel and chemicals. An autoclave batch reactor was used to perform the ethanolysis of PIR at different temperature ranges (250–375 °C), with different ethanol to PIR ratio (0.5:1 to 4:1), and at different reaction times (15–75mins). The experimental results showed that a maximum yield of 86 wt % was achieved at temperature of 325 °C, ethanol to PIR ratio 1/1, and reaction time of 30 min. This liquid oil yield is about 14% higher than the yield obtained from the pyrolysis of PIR at 500 °C and about 10% higher than the yield obtained from hydrothermal liquefaction of PIR at 375 °C. Moreover, the utilization of ethanol in the process was also incorporated and product yields were redefined. Furthermore, ethanol contributed to enhance the quality of liquid-oil, particularly in term of viscosity, acidity, and energy density. Furthermore, the FTIR analysis showed methyl and methylene were most dominating functional groups found in the liquid product and GCMS analysis identified that they were presented by alkenes, aromatics, and alkyls.