• Energy Research
• 11. Sustainability close
• 7. Clean energy close
• 6. Clean water close
• IN close
• Sustainability close

Siderophores are low molecular weight secondary metabolites produced by microorganisms under low iron stress as a specific iron chelator. In the present study, a rhizospheric bacterium was isolated from the rhizosphere of sesame plants from Salem district, Tamil Nadu, India and later identified as Bacillus subtilis LSBS2. It exhibited multiple plant-growth-promoting (PGP) traits such as hydrogen cyanide (HCN), ammonia, and indole acetic acid (IAA), and solubilized phosphate. The chrome azurol sulphonate (CAS) agar plate assay was used to screen the siderophore production of LSBS2 and quantitatively the isolate produced 296 mg/L of siderophores in succinic acid medium. Further characterization of the siderophore revealed that the isolate produced catecholate siderophore bacillibactin. A pot culture experiment was used to explore the effect of LSBS2 and its siderophore in promoting iron absorption and plant growth of Sesamum indicum L. Data from the present study revealed that the multifarious Bacillus sp. LSBS2 could be exploited as a potential bioinoculant for growth and yield improvement in S. indicum.

Soil salinity and the use of saline groundwater are two major constraints in crop production, which covers a ~1.0 billion ha area of arid and semi-arid regions. The improved drainage function of soil can modify the salty growing environment for higher agricultural production. The present study evaluated the effectiveness of cut-soiler-constructed rice residue-filled preferential shallow subsurface drainage (PSSD) to improve the drainage function and its effect on the yield, quality and plant–water relations of mustard over 2019–2021. Cut-soiler-simulated drains were made in a semi-controlled lysimeter (2 × 2 × 3; L*W*H m) as the main plot treatment in a double replicated split–split experiment with two soil types (subplot) and three irrigation water salinities (4, 8 and 12 dS m−1) as the sub-sub-plot treatment. The drainage volume of variable salinity (EC), dependent on the total water input, was substantially higher in the rainy season (April to October), i.e., 16.6, 7.76 and 12.0% during 2018, 2019 and 2020, with 1.7, 0.32 and 0.77 kg salt removal per lysimeter, compared to the post-rainy season. The mustard seed, straw and biological yields were improved by 31.4, 14.41 and 18.08%, respectively, due to a positive effect on plant–water relations. The mustard seeds produced in the cut-soiler-treated plots recorded higher oil, crude fiber and protein contents and a lower erucic acid content. The increase in salt load, by higher-salinity irrigation water, was also efficiently managed by using cut-soiler PSSD. It was found that the saline irrigation water up to 12.0 dS m−1 can be used under such PSSD without any extra salt loading. The present study showed the potential of cut-soiler PSSD in root zone salinity management by improving drainage in salt-affected arid regions.

This study evaluated the efficacy of enzyme induced calcite precipitation (EICP) in restricting the mobility of heavy metals in soils. EICP is an environmentally friendly method that has wide ranging applications in the sustainable development of civil infrastructure. The study examined the desorption of three heavy metals from treated and untreated soils using ethylene diamine tetra-acetic acid (EDTA) and citric acid (C6H8O7) extractants under harsh conditions. Two natural soils spiked with cadmium (Cd), nickel (Ni), and lead (Pb) were studied in this research. The soils were treated with three types of enzyme solutions (ESs) to achieve EICP. A combination of urea of one molarity (M), 0.67 M calcium chloride, and urease enzyme (3 g/L) was mixed in deionized (DI) water to prepare enzyme solution 1 (ES1); non-fat milk powder (4 g/L) was added to ES1 to prepare enzyme solution 2 (ES2); and 0.37 M urea, 0.25 M calcium chloride, 0.85 g/L urease enzyme, and 4 g/L non-fat milk powder were mixed in DI water to prepare enzyme solution 3 (ES3). Ni, Cd, and Pb were added with load ratios of 50 and 100 mg/kg to both untreated and treated soils to study the effect of EICP on desorption rates of the heavy metals from soil. Desorption studies were performed after a curing period of 40 days. The curing period started after the soil samples were spiked with heavy metals. Soils treated with ESs were spiked with heavy metals after a curing period of 21 days and then further cured for 40 days. The amount of CaCO3 precipitated in the soil by the ESs was quantified using a gravimetric acid digestion test, which related the desorption of heavy metals to the amount of precipitated CaCO3. The order of desorption was as follows: Cd > Ni > Pb. It was observed that the average maximum removal efficiency of the untreated soil samples (irrespective of the load ratio and contaminants) was approximately 48% when extracted by EDTA and 46% when extracted by citric acid. The soil samples treated with ES2 exhibited average maximum removal efficiencies of 19% and 10% when extracted by EDTA and citric acid, respectively. It was observed that ES2 precipitated a maximum amount of calcium carbonate (CaCO3) when compared to ES1 and ES3 and retained the maximum amount of heavy metals in the soil by forming a CaCO3 shield on the heavy metals, thus decreasing their mobility. An approximate improvement of 30% in the retention of heavy metal ions was observed in soils treated with ESs when compared to untreated soil samples. Therefore, the study suggests that ESs can be an effective alternative in the remediation of soils contaminated with heavy metal ions.

The conversion of methane into liquid biofuels using methane-consuming bacteria, known as methanotrophs, contributes to sustainable development, as it mitigates the problem of climate change caused by greenhouse gases and aids in producing cleaner and renewable energy. In the present research, an efficient methanotroph, Methylosarcina sp. LC-4, was studied as a prospective organism for biodiesel production using methane. The methane uptake rate by the organism was enhanced 1.6 times and 2.35 times by supplementing LC-4 with micronutrients, such as copper and tungstate, respectively. This unique ability of the isolated organism enables the deployment of methanotrophs-based processes in various industrial applications. A Plackett–Burman statistical (PBD) design was used to quantify the role of the micronutrients and other media components present in the nitrate minimal salt media (NMS) in biomass and fatty acid methyl esters (FAME) yields. Nitrate, phosphate, and tungstate had a positive effect, whereas copper, magnesium, and salinity had a negative effect. The modified NMS media, formulated according to the results from the PBD analysis, increased the FAME yield (mg/L) by 85.7%, with the FAME content of 13 ± 1% (w/w) among the highest reported in methanotrophs. The obtained FAME consisted majorly (~90%) of C14–C18 saturated and monounsaturated fatty acids, making it suitable for use as biodiesel.

Because of the current increase in energy requirement, reduction in fossil fuels, and global warming, as well as pollution, a suitable and promising alternative to the non-renewable energy sources is proton exchange membrane fuel cells. Hence, the efficiency of the renewable energy source can be increased by extracting the precise values for each of the parameters of the renewable mathematical model. Various optimization algorithms have been proposed and developed in order to estimate the parameters of proton exchange membrane fuel cells. In this manuscript, a novel hybrid algorithm, i.e., Hybrid Particle Swarm Optimization Puffer Fish (HPSOPF), based on the Particle Swarm Optimization and Puffer Fish algorithms, was proposed to estimate the proton exchange membrane fuel cell parameters. The two models were taken for the parameter estimation of proton exchange membrane fuel cells, i.e., Ballard Mark V and Avista SR-12 model. Firstly, justification of the proposed algorithm was achieved by benchmarking it on 10 functions and then a comparison of the parameter estimation results obtained using the Hybrid Particle Swarm Optimization Puffer Fish algorithm was done with other meta-heuristic algorithms, i.e., Particle Swarm Optimization, Puffer Fish algorithm, Grey Wolf Optimization, Grey Wolf Optimization Cuckoo Search, and Particle Swarm Optimization Grey Wolf Optimization. The sum of the square error was used as an evaluation metric for the performance evaluation and efficiency of the proposed algorithm. The results obtained show that the value of the sum of square error was smallest in the case of the proposed HPSOPF, while for the Ballard Mark V model it was 6.621 × 10−9 and for the Avista SR-12 model it was 5.65 × 10−8. To check the superiority and robustness of the proposed algorithm computation time, voltage–current (V–I) curve, power–current (P–I) curve, convergence curve, different operating temperature conditions, and different pressure results were obtained. From these results, it is concluded that the Hybrid Particle Swarm Optimization Puffer Fish algorithm had a better performance in comparison with the other compared algorithms. Furthermore, a non-parametric test, i.e., the Friedman Ranking Test, was performed and the results demonstrate that the efficiency and robustness of the proposed hybrid algorithm was superior.

Partial shading conditions (PSCs) are responsible for the root causes of photovoltaic (PV) system performance deprivation such as hotspots (damaged PV cells), mismatch power losses and multiple power maxima. Recently, PV array reconfiguration strategies have proven to be beneficial in improving PV system performance and achieving improved shade dispersion properties. This research analyzes the improved Su-Do-Ku (I-SDK) PV array configuration in order to counteract the shading effect. This approach implements a 6 × 6 size PV array configuration and performance evaluation under different realistic shading scenarios. The performance of the I-SDK configuration is assessed and compared to that of the total-cross-tied (TCT) and Su-Do-Ku (SDK) arrangements. The performance indices such as power loss (PL), power at global maximum power point (GMPP), fill-factor (FF), performance ratio (PR), power enhancement (PE) and execution ratio (ER) are analyzed to show comprehensive comparison. An experimental analysis confirms the MATLAB/Simulink findings, demonstrating that the I-SDK configuration outperforms both the TCT and SDK array setups. The GMPP values of 143.5 W, 141.7 W, 138.1 W and 129.3 W also show the superiority of I-SDK during four shading instances compared to conventional SP, TCT, SDK and SM arrangements. Moreover, under similar PSCs, higher %FF (74.61%, 76.10%, 77.1%, 75.92%) and lower PL (36.7 W, 38.5 W, 42.1 W, 50.9 W) support the adoptability of I-SDK for experimental validation/commercial viability.

Recent years have seen a rise in the frequency and severity of extreme rainstorm events, which have caused widespread damage and death in numerous cities. The manufacture and use of storm drainage materials result in numerous environmental concerns in the construction industry. Green materials for storm drainage networks are environmentally friendly compared to their traditional counterparts. Identifying and assessing sustainability criteria for green materials for storm drain networks has been challenging. This study aims to determine the critical criteria for selecting green materials for storm drainage networks using a stationary analysis approach. To this end, a questionnaire survey was administered to Egyptian storm engineers to assess their importance based on a selection criteria 29 green materials. From the results obtained, “Operation and maintenance cost” and “Use of local material” were seen to be the “stationary materials”. The obtained findings in this research pave the way for the Egyptian storm industry towards becoming environmentally friendly, which will in turn improve the functioning mechanism of sewer networks.

This work intended to explore some motivations that influence people’s eating habits towards sustainability. This was an observational, cross-sectional study, carried out by questionnaire survey on a non-probabilistic sample of 10,067 participants from 13 countries (Argentina, Brazil, Croatia, Greece, Hungary, Latvia, Lithuania, Poland, Portugal, Serbia, Slovenia, Romania and United States). Results indicated that people prefer fresh local foods from the season, being important because it allows transportation and storage to be reduced, which in many cases implies refrigeration systems and consequent energy expenditure. Although people avoid food waste at home, the awareness for the waste at restaurants still needs to be improved. Consumers seem to prefer foods that have been produced and packed in sustainable ways but still give importance to the package—understandable for food products. The results also indicated significant differences in the food choice motivations between groups for all sociodemographic variables tested (age, sex, marital status, education, professional area, living environment and country), but the association was high only for variable country. Additionally, a tree classification analysis allowed to identify the relative importance of the influential variables on the sustainable food choices, with country being the most important, followed by age and sex. Additionally, discriminant function analysis allowed establishing a model for the relation between country and six variables accounting for preservation of biodiversity, respect for life, save natural resources, save energy, reduce industrial pollution and minimal packaging. Although with some limitations, this study brings valuable insight into some aspects linked with sustainable food choices on a number of countries and how people shape their food choices according to some sustainability issues.