• Energy Research
• 2016-2025close
• IN close
• Sustainability close

Siderophores are low molecular weight secondary metabolites produced by microorganisms under low iron stress as a specific iron chelator. In the present study, a rhizospheric bacterium was isolated from the rhizosphere of sesame plants from Salem district, Tamil Nadu, India and later identified as Bacillus subtilis LSBS2. It exhibited multiple plant-growth-promoting (PGP) traits such as hydrogen cyanide (HCN), ammonia, and indole acetic acid (IAA), and solubilized phosphate. The chrome azurol sulphonate (CAS) agar plate assay was used to screen the siderophore production of LSBS2 and quantitatively the isolate produced 296 mg/L of siderophores in succinic acid medium. Further characterization of the siderophore revealed that the isolate produced catecholate siderophore bacillibactin. A pot culture experiment was used to explore the effect of LSBS2 and its siderophore in promoting iron absorption and plant growth of Sesamum indicum L. Data from the present study revealed that the multifarious Bacillus sp. LSBS2 could be exploited as a potential bioinoculant for growth and yield improvement in S. indicum.

Removal of Reactive Black 5 (RB5) dye from an aqueous solution was studied by its adsorption on banana peel biochars (BPBs). The factors affecting RB5 dye adsorption such as pH, exposure time, RB5 dye concentration, adsorbent dose, particle size and temperature were investigated. Maximum 97% RB5 dye removal was obtained at pH 3 with 75 mg/L adsorbate concentration by banana peel biochars. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) were used to characterize the adsorbent material. The data of equilibrium were analyzed by Langmuir and Freundlich isotherm models. The experimental results were best reflected by Langmuir isotherm with maximum 7.58 mg/g adsorption capacity. Kinetic parameters were explored and pseudo-second order was found suitable which reflected that rate of adsorption was controlled by physisorption. Thermodynamic variables exhibited that the sorption process was feasible, spontaneous, and exothermic in nature. Banana peel biochar showed excellent regeneration efficiency up to five cycles of successive adsorption-desorption. Banana peel biochar maintained >38% sorption potential of RB5 dye even after five cycles of adsorption-desorption. The phytotoxic study exhibited the benign nature of BPB-treated RB5 dye on tomato seeds.

Agriculture is essential to the existence of the human race, as well as the foundation of our civilization, because it provides food, fuel, fiber, and other resources necessary for survival; however, it is facing critical challenges due to anthropogenic climate change, which hampers food and nutritional security. Consequently, the agriculture industry must adjust to farming issues, such as the shift in global temperatures and environmental degradation, the scarcity of farm workers, population growth, and dietary changes. Several measures have been implemented to enhance agricultural productivity, including plant breeding, genetic engineering, and precision agriculture. In recent years, the world has witnessed the burgeoning development of novel scientific innovations and technological advancements enabled by drones, smart sensors, robotics, and remote sensing, resulting in a plethora of revolutionary methods that can be applied to real-time crop modeling, high-throughput phenotyping, weather forecasting, yield prediction, fertilizer application, disease detection, market trading, farming practices, and other environmental practices vital to crop growth, yield, and quality. Furthermore, the rise in big data, advanced analytics, falling technology costs, faster internet connections, increased connectivity, and increases in computational power are all part of the current digitalization wave that has the potential to support commercial agriculture in achieving its goals of smart farming, resilience, productivity, and sustainability. These technologies enable efficient monitoring of crops, soil, and environmental conditions over large areas, providing farmers with data to support precise management that optimizes productivity and minimizes environmental impacts. Though smart farming has significant potential, challenges like high implementation costs, data security concerns, and inadequate digital literacy among farmers remain. In summary, agriculture is rapidly transforming from conventional to digital farming, offering global solutions, efficient resource utilization, and minimized input costs while fostering farmer livelihoods and economic growth. Delivering a comprehensive view of how technology could help in tackling critical issues like environmental degradation and threatened world biodiversity, this perspective emphasizes the perks of digitalization. Future advancements may involve data encryption, digital literacy, and particular economic policies.

The study aimed to determine Aluminum sludge composition and structure for its valorisation as an alternative natural material for heavy metals removal from wastewater for further reuse as treated water in different applications. The study was conducted to investigate the introduction of Al-bearing sludge composition. The physical and chemical properties were examined using X-ray diffraction tests (XRD), scanning electron microscope tests (SEM), Fourier-transform infrared tests (FTIR), and Brunauer-Emmett-Teller tests (BET). Furthermore, the heavy metal concentrations of synthetic wastewater were measured using the spectrophotometry method. The experimental procedure is based on testing different pH limits and amounts of aluminum sludge to find the optimum conditions for copper (Cu) and zinc (Zn) removal. The results demonstrated a high removal efficiency where its value reached up to 97.4% and 96.6% for Zn and Cu, respectively, in an acidic medium (pH = 6) using a relatively high amount of sludge (1400 mg). Nevertheless, a low efficiency was obtained in the strongly acidic medium (pH = 4) and a smaller sludge amount of about 480 mg.

Saffron, also known as “the golden spice”, is one of the most expensive crops in the world. The expensiveness of saffron comes from its rarity, the tedious harvesting process, and its nutritional and medicinal value. Different countries of the world are making great economic growth due to saffron export. In India, it is cultivated mostly in regions of Kashmir owing to its climate and soil composition. The economic value generated by saffron export can be increased manyfold by studying the agronomical factors of saffron and developing a model for artificial cultivation of saffron in any season and anywhere by monitoring and controlling the conditions of its growth. This paper presents a detailed study of all the agronomical variables of saffron that have a direct or indirect impact on its growth. It was found that, out of all the agronomical variables, the important ones having an impact on growth include corm size, temperature, water availability, and minerals. It was also observed that the use of IoT for the sustainable cultivation of saffron in smart cities has been discussed only by very few research papers. An IoT-based framework has also been proposed, which can be used for controlling and monitoring all the important growth parameters of saffron for its cultivation.

Soil salinity and the use of saline groundwater are two major constraints in crop production, which covers a ~1.0 billion ha area of arid and semi-arid regions. The improved drainage function of soil can modify the salty growing environment for higher agricultural production. The present study evaluated the effectiveness of cut-soiler-constructed rice residue-filled preferential shallow subsurface drainage (PSSD) to improve the drainage function and its effect on the yield, quality and plant–water relations of mustard over 2019–2021. Cut-soiler-simulated drains were made in a semi-controlled lysimeter (2 × 2 × 3; L*W*H m) as the main plot treatment in a double replicated split–split experiment with two soil types (subplot) and three irrigation water salinities (4, 8 and 12 dS m−1) as the sub-sub-plot treatment. The drainage volume of variable salinity (EC), dependent on the total water input, was substantially higher in the rainy season (April to October), i.e., 16.6, 7.76 and 12.0% during 2018, 2019 and 2020, with 1.7, 0.32 and 0.77 kg salt removal per lysimeter, compared to the post-rainy season. The mustard seed, straw and biological yields were improved by 31.4, 14.41 and 18.08%, respectively, due to a positive effect on plant–water relations. The mustard seeds produced in the cut-soiler-treated plots recorded higher oil, crude fiber and protein contents and a lower erucic acid content. The increase in salt load, by higher-salinity irrigation water, was also efficiently managed by using cut-soiler PSSD. It was found that the saline irrigation water up to 12.0 dS m−1 can be used under such PSSD without any extra salt loading. The present study showed the potential of cut-soiler PSSD in root zone salinity management by improving drainage in salt-affected arid regions.

This study evaluated the efficacy of enzyme induced calcite precipitation (EICP) in restricting the mobility of heavy metals in soils. EICP is an environmentally friendly method that has wide ranging applications in the sustainable development of civil infrastructure. The study examined the desorption of three heavy metals from treated and untreated soils using ethylene diamine tetra-acetic acid (EDTA) and citric acid (C6H8O7) extractants under harsh conditions. Two natural soils spiked with cadmium (Cd), nickel (Ni), and lead (Pb) were studied in this research. The soils were treated with three types of enzyme solutions (ESs) to achieve EICP. A combination of urea of one molarity (M), 0.67 M calcium chloride, and urease enzyme (3 g/L) was mixed in deionized (DI) water to prepare enzyme solution 1 (ES1); non-fat milk powder (4 g/L) was added to ES1 to prepare enzyme solution 2 (ES2); and 0.37 M urea, 0.25 M calcium chloride, 0.85 g/L urease enzyme, and 4 g/L non-fat milk powder were mixed in DI water to prepare enzyme solution 3 (ES3). Ni, Cd, and Pb were added with load ratios of 50 and 100 mg/kg to both untreated and treated soils to study the effect of EICP on desorption rates of the heavy metals from soil. Desorption studies were performed after a curing period of 40 days. The curing period started after the soil samples were spiked with heavy metals. Soils treated with ESs were spiked with heavy metals after a curing period of 21 days and then further cured for 40 days. The amount of CaCO3 precipitated in the soil by the ESs was quantified using a gravimetric acid digestion test, which related the desorption of heavy metals to the amount of precipitated CaCO3. The order of desorption was as follows: Cd > Ni > Pb. It was observed that the average maximum removal efficiency of the untreated soil samples (irrespective of the load ratio and contaminants) was approximately 48% when extracted by EDTA and 46% when extracted by citric acid. The soil samples treated with ES2 exhibited average maximum removal efficiencies of 19% and 10% when extracted by EDTA and citric acid, respectively. It was observed that ES2 precipitated a maximum amount of calcium carbonate (CaCO3) when compared to ES1 and ES3 and retained the maximum amount of heavy metals in the soil by forming a CaCO3 shield on the heavy metals, thus decreasing their mobility. An approximate improvement of 30% in the retention of heavy metal ions was observed in soils treated with ESs when compared to untreated soil samples. Therefore, the study suggests that ESs can be an effective alternative in the remediation of soils contaminated with heavy metal ions.

The conversion of methane into liquid biofuels using methane-consuming bacteria, known as methanotrophs, contributes to sustainable development, as it mitigates the problem of climate change caused by greenhouse gases and aids in producing cleaner and renewable energy. In the present research, an efficient methanotroph, Methylosarcina sp. LC-4, was studied as a prospective organism for biodiesel production using methane. The methane uptake rate by the organism was enhanced 1.6 times and 2.35 times by supplementing LC-4 with micronutrients, such as copper and tungstate, respectively. This unique ability of the isolated organism enables the deployment of methanotrophs-based processes in various industrial applications. A Plackett–Burman statistical (PBD) design was used to quantify the role of the micronutrients and other media components present in the nitrate minimal salt media (NMS) in biomass and fatty acid methyl esters (FAME) yields. Nitrate, phosphate, and tungstate had a positive effect, whereas copper, magnesium, and salinity had a negative effect. The modified NMS media, formulated according to the results from the PBD analysis, increased the FAME yield (mg/L) by 85.7%, with the FAME content of 13 ± 1% (w/w) among the highest reported in methanotrophs. The obtained FAME consisted majorly (~90%) of C14–C18 saturated and monounsaturated fatty acids, making it suitable for use as biodiesel.