• Energy Research
• Closed Access close
• Restricted close
• CN close
• IT close
• Renewable Energy close

Abstract Breastshot water wheels are gravity hydraulic machines employed in low head sites. The scope of this work is to test the performance of a breastshot water wheel with two geometric inflow configurations: a sluice gate at different openings and two vertical overflow weirs. With the sluice gate, the maximum efficiency of the plant is 75%, constant over a wide range of flow rates, while the efficiency with the weir is increasing in the same flow rate range. Therefore, the wheel with the weir can exploit higher water volumes, and also it performs better at high power input. In practical applications, the inflow configuration can be effectively controlled to optimize the operative working conditions of breastshot water wheels, depending on the external hydraulic ones. The experimental results are also discussed in dimensionless terms, in order to support engineers in the design of similar breastshot water wheels.

Abstract Probability density functions (PDFs) are normally used to describe wind speed distribution for the proper selection of wind turbines in a given location. The identification of a suitable PDF is fundamental for accurately assessing the wind energy potential and designing the wind farms. To achieve this objective, the use of a mixture of two truncated normal distributions (MTTND), defined for v ≥ 0 and obtained by linearly combining two normal distributions with different means and variances, is proposed in this work for the representation of the wind speed PDF. The distribution is a function of five parameters, does not require a high computational burden and allows the representation of wind calm hours (v = 0). The use of the MTTND allows an accurate estimation to be obtained of the experimental discrete distribution of the probability density and cumulative probability, and the characteristic statistical quantities used to estimate the available energy and the performance indicators in the selection of both the site and wind turbine. The validity of the use of the MTTND was verified by comparison with the most widespread PDFs in the scientific literature: Weibull, Rayleigh, lognormal, gamma, inverse Gaussian and Burr. This comparison was developed using experimental wind speed data relating to five Italian locations and a location in Colorado (USA) belonging to the National Renewable Energy Laboratory. For each location, the parameters of each PDF were obtained with the least squares non-linear regression method. The results of the comparisons, in terms of the coefficient of determination R2 and root mean square error (RMSE) for goodness of fit and in terms of relative error in the calculation of the statistical quantities, show that the use of the MTTND gives rise to greater accuracy than a conventional wind speed PDF.

Abstract Compared with other traditional energy sources, renewable energy, which results the less pollution and has numerous resources, is a significant factor in addressing the current issues of the serious environmental pollution and the resource depletion. Large-scale renewable energy integrated to the grid could bring change in both morphological structure and operation modes of energy transmission. Therefore, it is necessary to research the evolution mechanism of the future transmission network with a high proportion of the renewable energy. In this paper, an evolution framework of power system with high proportion of renewable energy is proposed. Firstly, a network equivalence and simplification based on power transfer distribution factors (PTDFs) is proposed, which can effectively simplify the decision-making process of evolution of large-scale power system. Then, an annual production simulation (8760 h) which takes into account renewable energy and load fluctuations is used to find out the bottleneck of the power grid. Based on the above methods, evolution strategy of power system with high proportion of renewable energy is studied for finding out optimal expansion strategy. A real power system of Zhejiang province is used as a test system. Test results demonstrate the feasibility of the proposed evolution framework.

Abstract Sunlight Concentrated and transmission for daylighting via optical fibers is a booming technology of direct utilization of solar energy. It uses optical fibers to introduce sunlight deep into building interior. In this work, a sunlight concentrating and transmitting system via plastic optical fibers was developed and tested. This study addressed the cooling problem of the plastic optical fibers under highly irradiation. Polymethylmethacrylate (PMMA) plastic fibers have a strong absorption effect on infrared light, which means that plastic fibers heat up so much when they transmit focused sunlight that they burn. In this study, a comprehensive cooling approach was developed to solve the overheating problem of plastic optical fibers, which consists of an infrared filter, cooling water and a homogenizer. The transmission efficiency of the system was measured to be about 15%. Experiments show that the comprehensive cooling measures developed can ensure that PMMA plastic optical fibers are in a safe temperature range. This shows that it is feasible to use low-cost plastic optical fibers instead of expensive silica fiber to transmit high flux for daylighting.

Abstract In the present study, Ru modified hierarchical zeolites xRu-MZSM were developed for cellulose fast pyrolysis. Comprehensive catalyst characterizations including XRD, XPS, N2 adsorption-desorption, Py-IR and so on, were performed to unveil the essential structural properties. The chemical modification and Ru decoration remarkably regulated the distribution of Bronsted/Lewis acid sites. The presence of RuOx species would supply abundant strong Lewis acid sites for participating catalytic cracking, dehydration, decarbonylation, decarboxylation, cyclization, aromatization, etc., in cooperation with Bronsted acid sites. In-situ generated active Ru0 centers during cellulose pyrolysis might facilitate the proceeding of deoxygenation, hydride transfer, and dehydrogenation. Among the as-prepared catalysts screened, 2Ru-MZSM was much more efficient in aromatics production from cellulose fast pyrolysis compared to parent ZSM, wherein the total aromatics yield achieved 16.8% at temperature of 650 °C and heating rate of 10 °C/ms with corresponding E value as low as 23.40 kJ/mol. Also, plausible reaction mechanism for xRu-MZSM involved cellulose fast pyrolysis was proposed in detail.