• Energy Research
• IT close
• FR close

Abstract This paper presents experimental and numerical investigation of mistuned forced responses of an integrally bladed disk with full set of underplatform dampers (UPDs). This research aims at providing: 1. An experimental benchmark for nonlinear dynamics of a mistuned bladed disks with UPDs. 2. A numerical model that can account for features of a mistuned forced response level. Accordingly, a detailed experimental campaign is conducted on a static test rig called Octopus. This rig is specifically designed to investigate the dynamics of a full-scale integrally bladed disk (blisk) with UPDs in a noncontact manner so that the dynamic response of the system is not modified. The effect of mistuning on experimental forced response levels is assessed and a linearized model is proposed to predict the modulation of frequency response functions (FRFs) due to the frequency splitting. In the development of the model, the mistuning pattern identified from the linear blisk without UPDs is used and it is assumed that adding the dampers does not change the structural mistuning of the blisk. In this study, the fundamental mistuning model identification (FMM ID) was employed to identify the mistuning pattern of the blisk. It is shown that the proposed model successfully predicts the modulation of linear mistuned FRFs. The linearized model is also able to predict the modulation of nonlinear mistuned FRFs in stick condition (when nonlinear friction damping is negligible) with a good accuracy validating this assumption that adding the dampers does not change the mistuning pattern.

Abstract An international workshop was held in Richland, Washington, United States of America, in October, 1980 to discuss progress on development of the acid digestion process for treating combustible nuclear waste. The workshop was attended by participants from nine member countries of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA). The status of the acid digestion development programs of various countries is discussed in this paper. The acid digestion process has been developed and demonstrated on an engineering scale in several countries and appears to be especially applicable to treatment of combustible wastes containing high levels of transuranic contamination, where there is potential for recovering the transuranic radionuclides. Because the process takes place at a relatively low temperature, the plutonium contained in the residue is in a form that can be readily recovered using standard leaching techniques. The process is adaptable to a wide variety of combustible wastes, such as cellulosics, plastics, rubber materials, and ion exchange resin. While the process has been developed and demonstrated on an engineering scale primarily for transuranic contaminated wastes, the process is also adaptable to beta-gamma wastes such as reactor ion exchange resins.

In the quest for more efficient solar thermal systems, accurately determining the thermal emittance of low-emissive materials is crucial in determining the power losses. This paper describes the calorimetric method designed to precisely measure the thermal emittance of Selective Solar Absorbers (SSAs) to be used in High Vacuum Flat Plate Collectors (HVFPCs). The method’s capability is demonstrated through the successful correction of thermal emittance values for copper samples of varying sizes, including dimensions down to 49 cm2. Results highlight the method’s potential to significantly reduce measurement errors associated with small-size and/or low-emittance samples, providing a path forward to improve the design and efficiency of SSAs. This research marks a significant step in advancing solar thermal technology by enabling emittance measurements with a precision better than 0.003, which is essential for the development of high-performance solar thermal absorbers. The method has also been applied to correct the thermal emittance value of SSA measured in previous measurement campaigns, and it allows a better estimation of the SSA efficiency conversion curve.

Cu(In,Ga)Se-2-based solar cells buffered with indium sulfide grown by numerous techniques have reached efficiencies comparable to those achieved by standard devices buffered with (CBD)CdS. The present paper firstly recalls some of the properties of the indium sulfide single crystal and Points Out the disagreements concerning the thin films properties inventoried in the literature. Secondly, the influence of the presence of some "foreign elements" within file indium sulfide on its properties is presented. It is shown that these "foreign elements", even at low concentration levels, are possibly at the origin or the thin films properties deviations compared to the single crystal. The impact of these contaminants on the solar cells performance is finally discussed.

The movement of the powdery material occurs in a multi-phase non-uniform electrostatic field at determined values of the voltage and the frequency, using travelling wave technique. This technique was applied for very small particles such as bacteria and other similar particle size. The objective of this work is to analyze the movement of PVC micronized particles and the feasibility of the separation of PVC/copper granular mixture of average size 100 μm. Two-phase and three-phase conveyors, which are supplied by high voltage amplifiers controlled by digital function generators, have been the subject of a parametric experimental investigation. Several factors were analyzed such as the voltage level up to 1400 V, the frequency, the phase shift and the number of phases of the conveyor. The obtained results showed that depending on the values of the above factors: i) the micronized particles can move instantly right after switching the conveyor, ii) the particles move towards one direction or the other of the conveyor iii) the separation of a granular mixture of plastic and copper micronized particles is possible.

Most of the world’s mountain glaciers have been retreating for more than a century in response to climate change. Glacier retreat is evident on all continents, and the rate of retreat has accelerated during recent decades. Accurate, spatially explicit information on the position of glacier margins over time is useful for analyzing patterns of glacier retreat and measuring reductions in glacier surface area. This information is also essential for evaluating how mountain ecosystems are evolving due to climate warming and the attendant glacier retreat. Here, we present a non-comprehensive spatially explicit dataset showing multiple positions of glacier fronts since the Little Ice Age (LIA) maxima, including many data from the pre-satellite era. The dataset is based on multiple historical archival records including topographical maps; repeated photographs, paintings, and aerial or satellite images with a supplement of geochronology; and own field data. We provide ESRI shapefiles showing 728 past positions of 94 glacier fronts from all continents, except Antarctica, covering the period between the Little Ice Age maxima and the present. On average, the time series span the past 190 years. From 2 to 46 past positions per glacier are depicted (on average: 7.8).