• Energy Research
• 2. Zero hunger close
• IT close
• Energies close

The yeast Yarrowia lipolytica is an industrially relevant microorganism, which is able to convert low-value wastes into different high-value, bio-based products, such as enzymes, lipids, and other important metabolites. Waste cooking oil (WCO) represents one of the main streams generated in the food supply chain, especially from the domestic sector. The need to avoid its incorrect disposal makes this waste a resource for developing bioprocesses in the perspective of a circular bioeconomy. To this end, the strain Y. lipolytica W29 was used as a platform for the simultaneous production of intracellular lipids and extracellular lipases. Three different minimal media conditions with different pH controls were utilized in a small-scale (50 mL final volume) screening strategy, and the best condition was tested for an up-scaling procedure in higher volumes (800 mL) by selecting the best-performing possibility. The tested media were constituted by YNB media with high nitrogen restriction (1 g L−1 (NH4)2SO4) and different carbon sources (3% w v−1 glucose and 10% v v−1 WCO) with different levels of pH controls. Lipase production and SCO content were analyzed. A direct correlation was found between decreasing FFA availability in the media and increasing SCO levels and lipase activity. The simultaneous production of extracellular lipase (1.164 ± 0.025 U mL−1) and intracellular single-cell oil accumulation by Y. lipolytica W29 growing on WCO demonstrates the potential and the industrial relevance of this biorefinery model.

This paper aims to provide a bibliometric analysis of publication trends on the themes of biomass and bioenergy worldwide. A wide range of studies have been performed in the field of the usage of biomass for energy production, in order to contribute to the green transition from fossil fuels to renewable energies. Over the past 20 years (from 2000 to 2019), approximately 10,000 articles have been published in the “Agricultural and Biological Sciences” field on this theme, covering all stages of production—from the harvesting of crops to the particular type of energy produced. Articles were obtained from the SCOPUS database and examined with a text mining tool in order to analyze publication trends over the last two decades. Publications per year in the bioenergy theme have grown from 91 in 2000 to 773 in 2019. In particular the analyses showed how environmental aspects have increased their importance (from 7.3% to 11.8%), along with studies related to crop conditions (from 10.4% to 18.6%). Regarding the use of energy produced, growing trends were recognized for the impact of biofuels (mentions moved from 0.14 times per article in 2000 to 0.38 in 2019) and biogases (from 0.14 to 0.42 mentions). Environmental objectives have guided the interest of researchers, encouraging studies on biomass sources and the optimal use of the energy produced. This analysis aims to describe the research evolution, providing an analysis that can be helpful to predict future scenarios and participation among stakeholders in the sector.

For the agricultural sector to develop sustainably in the future, progress toward more environmentally friendly technologies and methods is crucial. It is necessary to increase output while reducing the demand for energy, agrochemicals, and water resources. Although greenhouses can be utilized successfully for this purpose, significant technical advancements are required, especially when it comes to heating, to lower the use of fossil fuels and boost energy efficiency. Microwaves can warm plants without heating the entire greenhouse volume, which takes a significant amount of energy to compensate for heat loss in the outdoor environment. In this paper, through a thorough examination of the state of the art, a general overview of novel greenhouse heating systems based on radiation is reported. First, the strengths and weaknesses of microwave heating are discussed, and finally, the use of microwaves for soil sterilization is examined. All outcomes suggest these irradiation-based technologies can contribute significantly to energetically sustainable agriculture; moreover, they can be used to increase plant comfort.

Greenhouse crops represent a significant productive sector of the agricultural system; one of the main problems to be addressed is indoor air conditioning to ensure thermal well-being of crops. This study focuses on the ventilation analysis of solar greenhouse with symmetrical flat pitched roof and single span located in a warm temperate climate. This work proposes the dynamic analysis of the greenhouse modeled in TRNsys, simultaneously considering different thermal phenomena three-dimensional (3D) shortwave and longwave radiative exchange, airflow exchanges, presence of lamps with their exact 3D position, ground and plant evapotranspiration, and convective heat transfer coefficients. Several air conditioning systems were analyzed, automatic window opening, controlled mechanical ventilation systems (CMV) and horizontal Earth-to-Air Heat Exchanger (EAHX) coupled with CMV, for different air volume changes per hour. In summer, the exploitation of the ground allows having excellent results with the EAHX system, reducing the temperature peaks of up to 5 °C compared to the use of CMV. In winter, it is interesting to note that, although the EAHX is not the solution that raises the temperature the most during the day, its use allows flattening the thermal wave more. In fact, the trend is almost constant during the day, raising the temperature during the first and last hours of the day.

One of the best precursors for winter wheat is fallow. Its application aims to solve two important tasks: preserving and accumulating soil moisture and weed control. The authors of this paper have designed a new modular harrow for fallow tillage, which can work stably at a depth of 5–6 cm tillage while maintaining and even accumulating soil moisture. This article describes a method designed by the authors for a reasonable selection of the design parameters concerning the working devices mounted inside the new harrow, such as their length and working width, as well as the angles of vertical inclination (ε) and horizontal deviation (γ) of blades, depending on the accepted depth of the upper soil layer loosening. To reduce the soil tillage resistance of the harrowing unit resulting in a reduction in the tractor fuel consumption, the value of the inclination angle (ε) of its vertical blade should be chosen so that the corresponding change in the value of the deflection angle of the horizontal blade (γ) complies with the constrain of the product of tangents of these angles. Moreover, preference should be given to choosing the value of the angle ε with the subsequent determination of the angle γ value. It is demonstrated that proper use of the new type of harrow assures fuel savings and decreases carbon dioxide emissions even if fossil fuel alone is used. Additional reduction of CO2 emission can be achieved when biofuels are used as a replacement for fossil ones.

In the last decade, increased environmental awareness has prompted the adoption of incentives for exploiting renewable energy sources. Among these, biogas production has received a certain attention in developed countries. Nonetheless, the subsidies provided have posed the problem of an activity (the production of bioenergy) that engages in direct competition with food and feed production for limited resources, like agricultural land. Even if this competition may be softened by allocating marginal land and/or using dedicated non-agricultural crops, empirical evidence shows that biogas plants have been developed in highly-productive agricultural areas, using increasing amounts of maize silage as feedstock. Thus, studies aimed at measuring the effect of biogas production on agricultural activities are needed in order to avoid this socially undesirable outcome. The paper presents an econometric estimation of the impact of biogas plants on farmland rental values of a Northern Italian rural area. Results show that biogas has a non-linear effect on rental prices, suggesting that incentive schemes specifically accounting for plants’ dimensions and technologies would improve the social sustainability of the bioenergy sector and its coexistence with agricultural activity.

The article presents the effect of using a tillage tool with skimmers, second stage skimmers, and bodies (double-deck plow) on the reduction of traction resistance and energy consumption by at least 1.1 kN, i.e., 3.3%. In addition, the statistical characteristics of the plowing depth and the width of the longitudinal profile of the field are stabilized. The use of agricultural machinery with skimmers, secondary skimmers, or bodies ensures even distribution of plowing depth fluctuations. The use of a plow without skimmers mounted on it leads to a regular and significant increase in the spread of fluctuations in the working depth and cross-section of the field. The normalized correlation function of this process is characterized by the presence of a noticeably marked periodic component. When the plow is used without skimmers mounted on it, the working period of the unit practically corresponds to the working width of the tillage tool. The use of skimmers with a grinding angle of 25° causes its deformation in the soil environment, which results in stratification, not shearing. This ensures a statistically significant and regular decrease in the traction resistance of the plow.

Pruning residues could represent an important biomass resources for energy production. Only in Italy it has been estimated that an annual quantity of biomass of over 2600 kt of dry matter could be obtained from olive residues. Several machines developed for pruning harvesting are available in the market, most of which are tractor-driven, while limited knowledge is available on performance, quality of work and costs of harvesting logistics based on stationary chippers. The aim of the present paper is to analyze machine performance of a forestry stationary chipper applied to pruning harvesting for what concerns work productivity, quality of the comminuted product and harvesting operating costs. This system is actually applied by Fiusis Company, an Italian enterprise which manages a biomass power plant exclusively powered by olive trees’ pruning residues, and it has never been analyzed in literature. The results obtained showed consistent work productivity, which resulted the highest ever found in olive pruning harvesting systems and equal to 5.23 ± 0.81 tdm·h−1. This high work productivity allowed also to obtain a little economic gain from a matter, which is actually considered a problem for olive groves’ owners and not a potential source of income. In particular, the use of a stationary chipper seemed very efficient in olive groves with a consistent amount of wooden residues to be processed and with big branches not harvestable by the most common towed pruning harvester. In addition, the stationary chipper has the advantage of avoiding the preliminary raking operation, which results in reduced costs for the farmer.