• Energy Research
• engineering and technology close
• 6. Clean water close
• NL close
• EU close

In the current study, we examine the Indonesian government's watershed management program, which was established in 2001. In 2005, the Coordination Team for Rescue of Water Resources (CTRWR) was established to execute the program on a national level. However, at the time, field implementation was a sectoral interest due to the lack of program integration. To this end, the Indonesian government promoted integrated watershed management in 2009, which since then has been implemented by all stakeholders (in Top–Down management form), with application limited to preparing and planning documents. This is mainly driven by the stakeholders’ lack of understanding with regard to watershed systems as integrated management units. Field implementation results have not yet been realized, including the promotion of community-based watershed management (through Bottom–Up management). The purpose of our research was to determine the index numbers by measuring the level of cooperation between watershed management workers based on the Village Watershed Model (VWM) specifically surface water which includes six variables: planning, participation, institutional, fund sharing, gender, and management systems. The method used was an ordinal measure with the Likert scale. Our data showed successful watershed management, in which five of the six VWM variables—planning, participation, institutional, fund sharing, and management systems—were in the “good” category with indices ranging from 73.08 to 78.27. The gender variable index (69.12) was in the “medium” category.

AbstractThis paper presents the experimental plans and designs as well as examples of predictive modeling of a pilot-scale CO2 injection experiment at the Heletz site (Israel). The overall objective of the experiment is to find optimal ways to characterize CO2 -relevant in-situ medium properties, including field-scale residual and dissolution trapping, to explore ways of characterizing heterogeneity through joint analysis of different types of data, and to detect leakage. The experiment will involve two wells, an injection well and a monitoring well. Prior to the actual CO2 injection, hydraulic, thermal and tracer tests will be carried out for standard site characterization. The actual CO2 injection experiments will include (i) a single well injection-withdrawal experiment, with the main objective to estimate in-situ residual trapping and (ii) a two-well injection-withdrawal test with injection of CO2 in a dipole mode (injection of CO2 in one well with simultaneous withdrawal of water in the monitoring well), with the objective to understand the CO2 transport in heterogeneous geology as well as the associated dissolution and residual trapping. Tracers will be introduced in both experiments to further aid in detecting the development of the phase composition during CO2 transport. Geophysical monitoring will also be implemented. By means of modeling, different experimental sequences and injection/withdrawal patterns have been analyzed, as have parameter uncertainties. The objectives have been to (i) evaluate key aspects of the experimental design, (ii) to identify key parameters affecting the fate of the CO2 and (iii) to evaluate the relationships between measurable quantities and parameters of interest.

AbstractSulfate reduction in salt‐rich wastewaters using unadapted granular sludge was investigated in 0.9 L UASB reactors (pH 7.0 ± 0.2; hydraulic retention time from 8–14 h) fed with acetate, propionate, or ethanol at organic loading rates up to 10 gCOD.L−1.day−1 and in excess sulfate (COD/SO of 0.5). High‐rate sulfate reduction rates (up to 3.7 gSO42‐.L−1.day−1) were achieved at salinities exceeding 50 gNaCl.L−1 and 1 gMgCl2.L−1. Sulfate reduction proceeded at a salinity of up to 70 gNaCl.L−1 and 1 gMgCl2.L−1 (corresponding to a conductivity of about 85–90 mS.cm−1), although at lower rates compared to a conductivity of 60–70 mS.cm−1. Ethanol as well as propionate were suitable substrates for sulfate reduction, with acetate and sulfide as the end products. The successful high‐rate treatment was due to the proliferation of a halotolerant incomplete oxidizing SRB population present in the unadapted inoculum sludge. Bioaugmentation of this sludge with the acetate oxidizing halotolerant SRB Desulfobacter halotolerans was unsuccessful, as the strain washed out from the UASB reactor without colonizing the UASB granules. © 2004 Wiley Periodicals, Inc.

Reverse electrodialysis (RED) is a technology to generate power from mixing waters with different salinity. The net power density (i.e. power per membrane area) is determined by 1) the membrane potential, 2) the ohmic resistance, 3) the resistance due to changing bulk concentrations, 4) the boundary layer resistance and 5) the power required to pump the feed water. Previous power density estimations often neglected the latter three terms. This paper provides a set of analytical equations to estimate the net power density obtainable from RED stacks with spacers and RED stacks with profiled membranes. With the current technology, the obtained maximum net power density is calculated at 2.7 W/m2. Higher power densities could be obtained by changing the cell design, in particular the membrane resistance and the cell length. Changing these parameters one and two orders of magnitude respectively, the calculated net power density is close to 20 W/m2

Abstract This study investigated in-situ and ex-situ biological methanation strategies for biogas upgrading potential. The addition and circulation of hydrogen with a ceramic gas diffuser unit revealed positive effects on the methanogenic process. A short-term maximum methane productivity of 2.5 L CH4 per L reactor volume per day (LVR−1 d−1) was obtained in-situ. Adverse effects of elevated dissolved hydrogen concentrations on acetogenesis became evident. Ex-situ methanation in a reactor subjected to gas recirculation for recurrent 24 h periods achieved methane formation rates of 3.7 L CH4 LVR−1 d−1. A biomethane with methane concentrations in excess of 96% successfully demonstrated the potential for gas grid injection. A theoretic model supplying gases continuously into a sequential ex-situ reactor system and steadily displacing the upgraded biogas confirmed similar methane formation performance and was advanced to a full-scale concept. Gas conversion efficiency of 95% producing biomethane at 85% methane content was attained. A hybrid model, where an in-situ grass digester is followed by an ex-situ reactor, is proposed as a novel upgrading strategy.

Abstract In this paper we report an approach to improve water management of commercial GDLs by introducing hydrophobicity patterns. Specifically, line and grid patterns have been created in the MPL side by laser radiation. For an in-depth investigation of these modified GDLs the current density distribution was monitored during fuel cell operation. Additionally, the physical properties of these materials were investigated by a number of ex situ methods such as Fourier transform infrared microscopy, electrochemical impedance spectroscopy and water vapor sorption. Furthermore, a comparison of the physical properties of the patterned GDLs with chemically modified GDLs (treated in H2SO4 and H2O2) is provided. Our results show a clearly improved homogeneity of current density distribution of the patterned GDLs compared to untreated GDLs. This observation is likely due to a reduced local hydrophobicity which facilitates water diffusion along the flow field of the fuel cell. However, performance of the fuel cell was not affected by the MPL irradiation. Graphical Abstract

AbstractThe Gorgon Joint Venture† made the Final Investment Decision (FID) for the Gorgon Project in September 2009. One element of that approval was the decision to proceed with the Carbon Dioxide Injection Project on Barrow Island, whereby CO2 separated from the reservoir gas from the Gorgon and Jansz-Io fields will be injected into a deep sandstone interval beneath Barrow Island.Since FID, the focus has been on delivering the project – this involves preparations for drilling and completing the four different well types, engineering design and procurement of the CO2 pipeline and procurement and manufacture of the CO2 compression system within the LNG plant.In addition to this engineering activity, the subsurface team has continued with improving their knowledge of the injection interval and overlying geology. The focus of this work has been two-fold:1.Deliver work to support the execution decisions, e.g. finalising well locations, well construction design, well completion design, reservoir data gathering plans, etc. In addition work has also been done to prepare for operations, focusing on understanding the behaviour of super- critical CO2 in the full system from the compressor to the reservoir as a basis for developing operations procedures and documents.2.Prepare for long term reservoir and project management; this includes developing a reservoir management plan with emphasis on surveillance data, continuing to develop the monitoring plans for understanding distribution of CO2 in the injection interval and continuing to evaluate and update understanding of subsurface uncertainties.We currently anticipate commissioning of the carbon dioxide injection system contemporaneous with the start-up of the second Gorgon LNG train in 2015. Between now and then the Carbon Dioxide Injection Project will drill and complete 17 wells, install a seven kilometre buried pipeline and associated facilities and construct, install and commission the CO2 compression system.* The Gorgon Joint Venture comprises the Australian subsidiaries of Chevron (47.3 percent), Exxon Mobil (25 percent), Shell (25 percent), Osaka Gas (1.25 percent), Tokyo Gas (1 percent) and Chubu Electric Power (0.417 percent). Chevron Australia is the operator of the Gorgon Project.

With almost 40% of the global population suffering from water scarcity, the need to manage water resources is evidently urgent. While water and energy systems are intrinsically linked, the availability of comprehensive, integrated data sets across the domains of water and energy is generally lacking. As a result, estimated indicators representing volumes of water usage per unit of electricity or fuel produced are often required to analyse the water-energy nexus. In this paper, an "ensemble" of indicators is assembled representing water usage spanning different electricity-generation technologies based on previously published works in an attempt to depict the level or lack of detail in current large-scale energy-sector water-usage data. Based on these, the degree in which using such estimates is suitable for reproducing electricity-production water-usage at coarser spatio-temporal scales is assessed. The performance of the ensemble median/min/max as a predictor of water use is evaluated for the period from 1980 to 2015 using additional information about the constituents of the European energy system. Comparing with the reported values for 1980-2015, the median provides a skillful reproduction of historical yearly water use for the EU (EU28) as a whole. A further analysis for 2015 indicates that reasonable agreement is also seen at the country level. Thus, the results suggest that an "ensemble-based approach" has the potential to provide sturdy estimates of yearly water use by energy systems for analyses at both the country and regional levels.