• Energy Research
• Open Access close
• 7. Clean energy close
• 11. Sustainability close
• 6. Clean water close
• 2. Zero hunger close
• SA close
• PK close

As smart cities become a global topic, interest in smart mobility, the core of smart cities, is also growing. The technology that comes closest to general users is “autonomous driving”. In particular, the successful market entry and establishment of some private companies proved that “autonomous driving” is not technology of the future but imminent reality. However, safety in autonomous vehicles that rely on sensors instead of the driver’s five senses has been the focus of attention from the beginning and continues to be so. In this study, we attempted to counter this interest. Based on the actual data of thirty traffic accidents, assuming the AEBS (Autonomous Emergency Braking System) was installed to assist the driver in safe driving, it was reinterpreted through simulation to see what changes occurred in the accident. In the computer program, PC-Crash, the results were first analyzed through simulation using Euro NCAP (New Car Assessment Program)’s AEBS test standards. Subsequently, the other variables in the AEBS were controlled and the accident was reinterpreted by changing only the angle of the radar detection sensor. As a result, it was confirmed that a total of 27 accidents out of thirty accidents could have been prevented with the AEBS. In addition, it proved that the crash avoidance rate of vehicles gradually increased as the radar angle increased.

AbstractThis work reports the synthesis, characterization, photophysical, and photovoltaic properties of five new thieno[3,2‐b][1]benzothiophene isoindigo (TBTI)‐containing low bandgap donor–acceptor conjugated polymers with a series of comonomers and different side chains. When TBTI is combined with different electron‐rich moieties, even small structural variations can have significant impact on thin film morphology of the polymer:phenyl C70 butyric acid methyl ester (PCBM) blends. More importantly, high‐resolution electron energy loss spectroscopy is used to investigate the phase‐separated bulk heterojunction domains, which can be accurately and precisely resolved, enabling an enhanced correlation between polymer chemical structure, photovoltaic device performance, and morphology.

The importance of the sustainability concept has gained increasing attention from scholars and practitioners. In this context, the aim of this study was to examine the determinants of intention to continue to use the new Metro in Qatar, which is considered a sustainable mode of travel. Therefore, in this paper, a special attention was paid to certain variables, such as environmental concern, perceived quality, and perceived benefits. A quantitative method approach was employed, in which data were collected based on self-administered questionnaires. A total of 1334 Qatar residents responded to the survey questionnaire, and Structural Equation Modeling (SEM) was used for hypothesis testing. The results confirmed the direct effects of perceived behavioral control, social influence, and attitudes on the intention of residents to continue to use the Metro network in their travel. Moreover, perceived behavioral control was found to play a mediating role, enhancing the indirect relationship between perceived benefits and intention to continue to use the Metro network. More importantly, environmental concerns significantly and positively affected the attitudes and perceived behavioral control of travelers; furthermore, these variables presented a mediated influence—through service quality—on the intention to continue to use the Metro network. This study enriched the sustainability behavior literature by examining the influences of crucial factors. Thus, this study is considered of great value for policy-makers who hope to maximize the awareness level of environmental sustainability among the population, in order to encourage them to embrace changes in their lifestyle towards becoming more environmentally responsible.

Heat energy storage systems were fabricated with the impregnation method using MgO and Mg(OH)2 as supporting materials and polyethylene glycol (PEG-6000) as the functional phase. MgO and Mg(OH)2 were synthesized from the salt Mg(NO3)·6H2O by performing hydrothermal reactions with various precipitating agents. The precipitating agents were NaOH, KOH, NH3, NH3 with pamoic acid (PA), or (NH4)2CO3. The result shows that the selection of the precipitating agent has a significant impact on the crystallite structure, size, and shape of the final products. Of the precipitating agents tested, only NaOH and NH3 with PA produce single-phase Mg(OH)2 as the as-synthesized product. Pore size distribution analyses revealed that the surfaces of the as-synthesized MgO have a slit-like pore structure with a broad-type pore size distribution, whereas the as-synthesized Mg(OH)2 has a mesoporous structure with a narrow pore size distribution. This structure enhances the latent heat of the phase change material (PCM) as well as super cooling mitigation. The PEG/Mg(OH)2 PCM also exhibits reproducible behavior over a large number of thermal cycles. Both MgO and Mg(OH)2 matrices prevent the leakage of liquid PEG during the phase transition in phase change materials (PCMs). However, MgO/PEG has a low impregnation ratio and efficiency, with a low thermal storage capability. This is due to the large pore diameter, which does not allow MgO to retain a larger amount of PEG. The latent heat values of PEG-1000/PEG-6000 blends with MgO and Mg(OH)2 were also determined with a view to extending the application of the PCMs to energy storage over wider temperature ranges.

Structural, optoelectronic, photovoltaic, and supplementary characterization data for “Benzylammonium-Mediated Formamidinium Lead Iodide Perovskite Phase Stabilization for Photovoltaics”, DOI:10.1002/adfm.202101163. Figure_2_XRD.zip: Data described in Figure 2 (XRD patterns) as Origin (.opj) software file. Figure_3_NMR_data.zip: Data described in Figure 3 (NMR spectra) in the file structure of the TopSpin software, which is available from Bruker. Figure_4_spectra.zip: Data described in Figure 4 (UV-vis absorption, PL and IPCE spectra) as Origin (.opj) software files. Figure_5_PV.zip: Data described in Figure 5 (photovoltaic characterization) as Origin (.opj) software files. Figure_6_spectra.zip: Data described in Figure 6 (PLQY and TRPL) as Origin (.opj) and *.csv files. Figure_7_stability.zip: Data described in Figure 7 (stability analysis) as Origin (.opj) software files. Figure_SI.zip: Data described in the Supporting Information Figures S1, S2, S3, S5, and S6 (XRD data, reciprocal space maps, radial profiles of q-maps, UV-vis absorption spectra, PL spectra, and additional photovoltaic characterization) as Origin (.opj), text (.txt), and image (.tiff) files.

Microbial fuel cell (MFC) has received much attention in the last decade as a promising technology to simultaneously generate electricity and decontaminate wastewater. This study aims to quantitatively review the published literature on MFC, published in the period of 1970–2020, based on the Web of Science (WoS) database. For the first time in literature, a comprehensive quantitative review of MFC has been conducted by employing the technique of bibliometric and content analyses. A total of 11,397 publications have been retrieved from WoS, out of which 81.6% are research articles. The evaluation in the field of MFC has been mapped in various categories, such as publication history, publication distribution, subject category distribution, leading journals, leading countries and leading organizations in MFC research. Additionally, content analysis has been conducted to unearth the research trends in MFC; and some hot research topics in MFC have been spotted. Results depict that the period 2011–2020 has been the most appreciating era for MFC research, as it contributed 87% of the total publications. Among the subject categories, energy fuel and microbiology lead with contributions of 26.5% for each, butthe overall growth of the energy fuel category in the last decade has been the highest. Out of 1,147 journals publishing MFC research, Bioresource Technology is the leading one; and countries like China, USA and India are the main hub of MFC research with 26.47%, 16.95% and 7.69% contributions in publications, respectively. The hottest topics in MFC research are nanoparticles, catalysts, air electrodes, graphene electrodes, power enhancement, air cathode and nitrogen removal. Moreover, major research areas are engineering, energy fuels and biotechnology with each contribution 26.5% of the total publications.

The paper aims to analyse the relationship between energy prices (biodiesel, crude oil) and food commodities - vegetable oils used also as feedstock for biodiesel production. The econometric technique of price transmission, such as unit root test, cointegration test and vector error correction model, is applied to assess the interdependencies between energy prices and vegetable oil prices in Germany. Results suggest close price linkages between prices of vegetable oils and biodiesel and confirm that the vegetable oil prices drive the price dynamics of biodiesel. However, the simultaneous relationship is only revealed between biodiesel and soybean oil prices. The increase in crude oil prices is found to lead to an upward trend in the vegetable oils used for biodiesel production, thus influencing biodiesel prices as well.

Microplastics are a growing concern in the environments and especially agricultural soil due to numerous negative impacts on the ecosystems and human health. This study aimed to investigate the properties of microplastics (including quantity, shape, size, and polymer types) in five samples (DA1-5) taken from agriculture soil in Dong Anh district, Hanoi using Nicolet iN10 MX Fourier transform infrared (µFTIR) microscope. The study found that the microplastic content in these soils ranging from 494 ± 292 items/kg dry weight to 1031 ± 379 items/kg dry weight. In terms of shape, microplastic fragments accounted for the majority of microplastics found in soil (65% - 86% of the total microplastics). Fifteen types of microplastic polymers were identified in the soil samples, with PET being the most common polymer of 38%, followed by urea-formaldehyde resin of 15%, and nylon of 13%. Microplastics with sizes ranging from 50-150 µm were the dominant group (39% - 57% of the total microplastics). This study provides an initial assessment of the presence of microplastics in the agricultural soil of the suburban area of Hanoi, highlighting the potential risk of contamination that may effect on environment and pose a threat to human health.