• Energy Research
• 2021-2025close
• natural sciences close
• RU close
• UA close

Deep eutectic solvents (DESs) are an alternative to traditional organic solvents and ionic liquids and meet the requirements of "green" chemistry. They are easy to prepare using low-cost constituents, are non-toxic and biodegradable. The review analyzes literature on the use of DES in various fields of biotechnology, provides data on the types of DESs, methods for their preparation, and properties. The main areas of using DESs in biotechnology include extraction of physiologically active substances from natural resources, pretreatment of lignocellulosic biomass to improve enzymatic hydrolysis of cellulose, production of bioplastics, as well as a reaction medium for biocatalytic reactions. The aim of this review is to summarize available information on the use of new solvents for biotechnological purposes.

This research looked at the state of soils faced with urbanization processes in the Arctic region of the Yamal-Nenets Autonomous District (YANAO). Soils recently used in agriculture, which are now included in the infrastructure of the cities of Salekhard, Labytnangi, Kharsaim, and Aksarka in the form of various parks and public gardens were studied. Morphological, physico-chemical, and agrochemical studies of selected soils were conducted. Significant differences in fertility parameters between urbanized abandoned agricultural soils and mature soils of the region were revealed. The quality of soil resources was also evaluated in terms of their ecotoxicology condition, namely, the concentrations of trace metals in soils were determined and their current condition was assessed using calculations of various individual and complex soil quality indices.

Although nitrogen (N) is the most limiting nutrient for agricultural production, its overuse is associated with environmental pollution, increased concentration of greenhouse gases, and several human and animal health implications. These implications are greatly affected by biochemical transformations and losses of N such as volatilization, leaching, runoff, and denitrification. Half of the globally produced N fertilizers are used to grow three major cereals—rice, wheat, and maize—and their current level of N recovery is approximately 30–50%. The continuously increasing application of N fertilizers, despite lower recovery of cereals, can further intensify the environmental and health implications of leftover N. To address these implications, the improvement in N use efficiency (NUE) by adopting efficient agronomic practices and modern breeding and biotechnological tools for developing N efficient cultivars requires immediate attention. Conventional and marker-assisted selection methods can be used to map quantitative trait loci, and their introgression in elite germplasm leads to the creation of cultivars with better NUE. Moreover, gene-editing technology gives the opportunity to develop high-yielding cultivars with improved N utilization capacity. The most reliable and cheap methods include agronomic practices such as site-specific N management, enhanced use efficiency fertilizers, resource conservation practices, precision farming, and nano-fertilizers that can help farmers to reduce the environmental losses of N from the soil–plant system, thus improving NUE. Our review illuminates insights into recent advances in local and scientific soil and crop management technologies, along with conventional and modern breeding technologies on how to increase NUE that can help reduce linked N pollution and health implications.

This article investigates the impact of the back-surface-field (BSF) thickness variation within a local aluminum contact on the performance of passivated emitter and rear contact solar cells. A significant difference of BSF thickness between contact endings and the center of dash-shaped contacts is verified experimentally by a comprehensive statistical analysis using scanning electron microscopy. The impact of local BSF thickness differences on the cell performance is studied with 3-D technology computer-aided design (TCAD) device simulations. Several device parameters such as BSF thicknesses, the doping concentration in the BSF profile at rear contacts, or the metallized area fraction at the cell rear side are varied. Our simulation study shows that the open-circuit voltage is mainly affected by locally reduced BSF thicknesses, resulting in an efficiency loss up to 0.14%abs or 0.84%abs, respectively, if an area fraction of 1% or 20% within a local contact has reduced BSF thicknesses. This effect can be minimized either by reducing the metallized area fraction at the cell rear side or by increasing the doping concentration in the BSF profile at aluminum rear contacts. In addition, we demonstrate that the 3-D simulations can be approximated with 2-D simulations by applying a single doping profile with an average BSF thickness, calculated with the harmonic mean.

Pharmaceutical and personal care products (PPCPs) are discharged into receiving water bodies mainly from sewage treatment plants. Due to the inefficient removal in conventional wastewater treatment facilities, PPCPs have become a major concern to aquatic ecosystems, water quality, and public health worldwide since they cause harmful effects on aquatic life and human even at low doses. Among the PPCPs, carbamazepine (CBZ) is one of the most commonly prescribed anticonvulsant drugs and consumed more than 1,000 tons per year. Due to its structural complexity, CBZ is known as recalcitrant compound highly stable during wastewater treatment. Consequently, it has become one of the most frequently detected pharmaceuticals in waste water, surface water, and even drinking water. In this study, Korean indigenous microalgae strains were tested as eco-friendly and cost-effective solutions for CBZ removal. Based on the preliminary biological CBZ degradation tests, Tetradesmus obliquus KNUA061 demonstrating the best CBZ removal rate was selected for further experiments. In order to increase strain KNUA061's CBZ removal efficiency, NaOCl, which is widely accepted in the water purification process, was used as an additional stimulus to induce stress conditions. At around 20 μg L−1 CBZ, addition of 1.0 mg NaOCl resulted in approximately 20% of removal rate increase without suppressing cells growth. Roughly 90% of CBZ remained its original form and the composition of the transformed secondary metabolites was less than 10% during the biodegradation process by the microalga. Based on the results of the antioxidant enzyme activities, degree of lipid oxidation, and amino acid contents, it was concluded that the redox-defence system in microalgal cells may have been activated by the NaOCl treatment. Biomass analysis results showed that higher heating value (HHV) of strain KNUA061 biomass was higher than those of lignocellulosic energy crops suggesting that it could be utilized as a possible renewable energy source. Even though its biodiesel properties were slightly below the international standards due to the high PUFA contents, the biodiesel produced from T. obliquus KNUA061 could be used as a blending resource for transportation fuels. It was also determined that the microalgal biomass has acceptable feasibility as a sustainable dietary supplement feedstock due to its high essential amino acid contents.

AbstractData capturing multiple axes of tree size and shape, such as a tree's stem diameter, height and crown size, underpin a wide range of ecological research—from developing and testing theory on forest structure and dynamics, to estimating forest carbon stocks and their uncertainties, and integrating remote sensing imagery into forest monitoring programmes. However, these data can be surprisingly hard to come by, particularly for certain regions of the world and for specific taxonomic groups, posing a real barrier to progress in these fields. To overcome this challenge, we developed the Tallo database, a collection of 498,838 georeferenced and taxonomically standardized records of individual trees for which stem diameter, height and/or crown radius have been measured. These data were collected at 61,856 globally distributed sites, spanning all major forested and non‐forested biomes. The majority of trees in the database are identified to species (88%), and collectively Tallo includes data for 5163 species distributed across 1453 genera and 187 plant families. The database is publicly archived under a CC‐BY 4.0 licence and can be access from: https://doi.org/10.5281/zenodo.6637599. To demonstrate its value, here we present three case studies that highlight how the Tallo database can be used to address a range of theoretical and applied questions in ecology—from testing the predictions of metabolic scaling theory, to exploring the limits of tree allometric plasticity along environmental gradients and modelling global variation in maximum attainable tree height. In doing so, we provide a key resource for field ecologists, remote sensing researchers and the modelling community working together to better understand the role that trees play in regulating the terrestrial carbon cycle.