• Energy Research
• 12. Responsible consumption close
• 2. Zero hunger close
• CN close
• US close
• UA close
• Sustainability close

A new environmental ban has forced the restructure of open dumps in China since 1 July 2011. A technical process was established in this study that is feasible for the upgrade of open dumps through restructuring. The feasibility of restructuring and the benefit of greenhouse gas emission reductions were assessed according to field surveys of five landfills and four dumps in Nanjing. The results showed that the daily processing capacities of the existing landfills have been unable to meet the growth of municipal solid waste (MSW), making restructuring of the landfills imperative. According to an assessment of the technical process, only four sites in Nanjing were suitable for upgrading. Restructuring the Jiaozishan landfill effectively reduced the leachate generation rate by 5.84% under its scale when expanded by 60.7% in 2015. CO2 emissions were reduced by approximately 55,000–86,000 tons per year, in which biogas power generation replaced fossil fuels Fossil fuels accounted for the largest proportion, up to 45,000–60,000 tons. Photovoltaic power generation on the overlying land has not only reduced CO2 emissions to 26,000–30,000 tons per year but has also brought in continuing income from the sale of electricity. The funds are essential for developing countries such as China, which lack long-term financial support for landfill management after closure.

Climate change, environmental degradation, and limited resources are motivations for sustainable forest management. Forests, the most abundant renewable resource on earth, used to make a wide variety of forest-based products for human consumption. To provide a scientific measure of a product’s sustainability and environmental performance, the life cycle assessment (LCA) method is used. This article provides a comprehensive review of environmental performances of forest-based products including traditional building products, emerging (mass-timber) building products and nanomaterials using attributional LCA. Across the supply chain, the product manufacturing life-cycle stage tends to have the largest environmental impacts. However, forest management activities and logistics tend to have the greatest economic impact. In addition, environmental trade-offs exist when regulating emissions as indicated by the latest traditional wood building product LCAs. Interpretation of these LCA results can guide new product development using biomaterials, future (mass) building systems and policy-making on mitigating climate change. Key challenges include handling of uncertainties in the supply chain and complex interactions of environment, material conversion, resource use for product production and quantifying the emissions released.

Understanding the system of connections between societal contexts and policy outcomes in municipal governments provides important insights into how community sustainability happens, and why it happens differently in various communities. A growing body of research in recent years has focused on understanding the socio-economic characteristics of communities and cities that are recognized as policy leaders in sustainability. In this paper, we expand the focus beyond the leaders in sustainability as we apply a selection of socio-demographic influences of community sustainability to a large sample of U.S. communities using community classification analytics to identity a range of community types and levels of engagement with sustainability. Our typology presents an integrated and comprehensive perspective on the structure of community sustainability in the United States, highlighting key points of comparison between human capital factors such as population size and density, affluence, home ownership, and adoption of sustainability policy. The analysis provides new insights not only about community leaders in sustainability, but also communities with the civic and social capacity to do more, and the challenges that may inhibit sustainability efforts in others.

To effectively address the sustainability crises our planet faces, decision-makers at different levels of government worldwide will have to get a handle on three key challenges: learning from Global North and South initiatives in tandem, taking stock of social innovations alongside technological fixes, and nurturing grassroots sustainable development initiatives next to, or in place of, top-down corporate and government interventions. Current scientific literature and grant-making institutions have often reinforced the compartmentalized fashion in which we learn and draw policy lessons from North/South, social/technical, and bottom-up/top-down sustainability initiatives, including local food system innovations. The strategic levers for global sustainable development lying in-between are thus left out. This paper uses exploratory, multiple case study analysis to address this omission. By concurrently drawing lessons from grassroots innovations in Brazil, New York, and Senegal—three profoundly different socioeconomic and geographic contexts—we identify common pressure points that have enabled local communities to drive system-wide transformations toward climate adaptation, resilience, and sustainability in the agri-food system. The findings of this paper would be of value to scholars, government officials, and community groups engaged in agri-food systems sustainability and interested in the processes of change that have allowed budding innovations to stabilize and scale up.

Although the United Nations’ Sustainable Development Goals (SDGs) advocate, through SDG 4 and SDG 10, equitable quality education and the reduction of inequalities within and between countries, respectively, few studies have examined how inequalities in regional sustainability influence higher education. Therefore, this study aims to examine the relationship between regional sustainability and higher education in China using fixed-effects panel modelling. A systematic force framework showing how regional sustainability drives higher education was constructed from economic, social, and environmental perspectives, and the endogeneity in the process of how regional sustainability affects higher education was explored by introducing one-year lagged values as instrumental variables. Our results show that regional sustainability has a significant impact on higher educational attainment in China, with differing effects in the eastern, central, and western regions, respectively. In central China, economic sustainability plays a significant positive role in higher educational attainment; in the western region, economic and social sustainability have stronger positive effects, while environmental sustainability has significantly negative effects. In terms of policy implications, our findings can be used to support regional development policies to promote regional higher education.

Due to their unique nature, construction projects are considered one of the world’s most hazardous and incident-prone industrial sectors. The present study aimed to analyze health, safety and environmental (HSE) risks relating to construction projects based on the project management body of knowledge (PMBOK) and sustainability approach. This study was conducted with the participation of 30 experts, using the semi-quantitative risk assessment technique, in nine areas of the project management’s body of knowledge, based on the fuzzy analytic hierarchy process. Risk, in this study, was estimated using a two-dimensional matrix of incident probability and severity, each of which has four sub-parameters. The HSE risks pertaining to each of the nine areas of PMBOK were identified. After that, the two dimensions of risk, including incident probability and severity, were measured. Thirty-seven risk sources associated with nine areas of the PMBOK were identified. Risk analysis revealed that 20 sources were at an unacceptable risk level, and 17 risks were at a tolerable risk level. Identifying HSE-related risk sources in accordance with the nine areas of PMBOK, and using FAHP to assess the risk of these hazards in construction projects, can lead to a more realistic estimate of risk in construction projects. The presented method in the current study can create a novel perspective in terms of the construction industry’s risk management and assessment.

The output of municipal solid waste is growing rapidly, which has brought tremendous pressure to urban development. The supply chain of municipal solid waste (MSW) in China mainly contains three processes: collection, transportation, and disposal. The waste is sorted at the collection and disposed of according to the classification. However, it is mixed at the transportation stage. Mixed transportation remixes the separately collected waste, which seriously affects the disposal effect. The supply chain of MSW urgently needs to be redesigned to improve the MSW disposal effect. First of all, on the ground of the waste treatment situation, we redesigned the supply chain of MSW in China. Secondly, combined with the redesign of the MSW supply chain, this paper established the function allocation model for collection stations, making a collection station only gather one type of waste, and built the transportation path planning model for vehicles, reducing the impact of waste storage on residents. Finally, based on the data of Xuanwu District in Beijing, the supply chain redesigning practical example of incinerable waste was given. The supply chain redesigning model in this paper not only makes full use of the existing infrastructure but also improves the disposal effect of waste. The supply chain redesigning model has practical application value.

The Chinese electric power industry, including its coal industry and other energy industries that are not efficient, contributes to China’s serious energy shortages and environmental contamination. The governing authority considers energy conservation to be one of the most prominent national targets, and has formulated various plans for decarbonizing the power system. Applying the trans-log cost function, this paper examined the trans-log cost function to analyze the potential inter-factor substitution among energy, capital and labor. We also investigated what role human capital played in energy substitution for the electric power sector during the period from 1981 to 2017. Three key results were derived: (1) energy is price-insensitive, (2) there exists large substitution sustainability between both capital and labor with energy, and (3) human capital input not only enhances the extent of energy substitutability with capital and labor but also is a substitute to energy itself. These findings imply that the liberalization of the electric price mechanism is conducive to lessening energy use and augmenting non-energy intensiveness, and that energy conservation technology could become more sustainable by investing more capital in the electricity sector, thereby achieving a capital–energy substitution and a decrease of CO2 emissions. We further suggest that the priority for the Chinese electric power industry should be to attach more importance to increasing human capital input.

The phenotypic and genotypic characterization of eight rhizobial isolates obtained from Arachis hypogaea nodules grown under stress environment was performed. Isolates were screened for their ability to tolerate different abiotic stresses (high temperature (60° C), salinity (1–5% (w/v) NaCl), and pH (1–12). The genomic analysis of 16S rRNA and housekeeping genes (atpD, recA, and glnII) demonstrated that native groundnut rhizobia from these stress soils are representatives of fast growers and phylogenetically related to Rhizobium sp. The phenotypic characterization (generation time, carbon source utilization) also revealed the isolates as fast-growing rhizobia. All the isolates can tolerate NaCl up to 3% and were able to grow between 20 and 37 °C with a pH between 5 to 10, indicating that the isolates were alkali and salt-tolerant. The tested isolates effectively utilize mono and disaccharides as carbon source. Out of eight, three rhizobial isolates (BN-20, BN-23, and BN-50) were able to nodulate their host plant, exhibiting their potential to be used as native groundnut rhizobial inoculum. The plant growth promoting characterization of all isolates revealed their effectiveness to solubilize inorganic phosphate (56–290 µg mL−1), synthesize indole acetic acid (IAA) (24–71 µg mL−1), and amplification of nitrogen fixing nifH gene, exploring their ability to be used as groundnut biofertilizer to enhance yield and N2-fixation for the resource poor farmers of rainfed Pothwar region.

Exploring the sensitivity of rural households’ livelihood strategies to livelihood capital is of great significance for improving rural households’ livelihood levels. This paper selects 23 livelihood capital measurement indicators and conducts an in-depth survey of rural households. In addition, the entropy method and a weighted comprehensive model are used to explore the basic characteristics of rural households’ livelihood capital in the upper reaches of the Min River, China, in 2017. Furthermore, econometric models are used to analyze the sensitivity of rural households’ livelihood strategies to livelihood capital. As indicated from the research, the livelihood capital levels of different types of rural households in the study area are not equivalent. The types of rural households with different livelihood strategies can be ordered in terms of quantity as follows: non-agricultural type > non-agricultural dominant type > agricultural dominant type > pure agricultural type. Livelihood strategies have different sensitivities to different livelihood capital measurement indicators. Among these indicators, cash income, the number of relatives and friends available for financial assistance, and the number of civil servants have positive effects on the livelihood strategy selection of non-agricultural dominant rural households and non-agricultural rural households. However, the average age of laborers, area of cultivated land and gardens, number of livestock and poultry, and present value of production tools have negative effects. These evaluation results can provide a scientific decision-making basis for the formulation of poverty alleviation policies by relevant government departments.