• Energy Research
• Closed Access close
• US close
• IR close
• HK close
• Energy close

Abstract Commercial potential in developing countries has always received a great attention from international investors, but this is not the case in Waste-to-Energy sector. Waste-to-Energy is bound up with various uncertainties rooted in its long-term nature therefore incorporating risks regarding political matters in developing countries makes it more complex. The present study substantiates the incompatibility of classic valuation methods in risky projects. Consequently, to deal with the riskiness of Waste-to-Energy investment in less developed countries, the combination of binomial tree analysis and Decoupled NPV is proposed. The hybrid approach is deployed to value a Waste-to-Energy project in Iran, and all evidence attest to the robustness of the method. The contribution of this paper can open up new vistas for investing in Waste-to-Energy industry, thus abating the catastrophic effects of landfill gas emissions.

Abstract The absorption refrigeration system driven by low grade heat sources, especially the waste heat sources, becomes more and more attractive in recent decades. However, most traditional absorption systems cannot achieve a high utilization rate of the waste heat with limited heat capacity. These systems are usually designed to obtain heat in the generator, which means that the waste heat sources cannot be utilized to the temperature lower than the generator temperature. This paper proposed a new structure heated by heat conduction oil in the generator and electric heating rings around the stripping section. This structure can simulate the temperature-distributed heat sources when the electric heating rings work. It can also simulate a traditional generator when the electric heating rings do not work. Influences of different heat distributions are analyzed in detail in this paper. The results show that the heat sources utilization rate will increase with the increase of the heat in the stripping section, while the coefficient of performance will be negatively affected by the increasing heat in the stripping section. By optimizing the heating structure, the coefficient of performance can be similar to that of a traditional system when the heat is just added in the middle and lower part of stripping section. The optimum utilization rate of heat sources in this test model can reach 1.8 times to that of a traditional system. Under this heating model, the lowest temperature required in the heating section is 82 °C when the heat conduction oil inlet temperature is 169 °C. It is much lower than the temperature inside the generator, which is 137.3 °C.

Abstract Large amounts of heat is wasted through air coolers and water coolers for cooling low temperature ( H ) recovered in the evaporator were 8.0–8.6 MW for ORC using i-pentane as working fluid and 8.2–8.3 MW for Kalina cycle, respectively. Efficiency (η) of selected systems obtained at the highest power generated (W T ) was 10.0% (W T = 862 kW) for ORC and 10.57% (W T = 996 kW) for Kalina cycle within the design boundaries. Calculated carbon dioxide (CO 2 ) emission reduction potential was 2260 t/y for ORC and 2600 t/y for Kalina system, respectively, at advantageous process conditions. Results showed that Kalina cycle provided higher efficiency and power generation ability on expense of higher system pressure (29 bar–7 bar). Economic calculations showed that the payback time is about 5.0 year for both systems.

Abstract This paper gives an experimental investigation of the effect of climatic conditions on the performance and degradation of crystalline silicon photovoltaic modules under Saharan environment in Adrar region in the south of Algeria. The first part of this study is focused on the analysis and assessment of UDTS 50 PV modules degradation after a long term outdoor exposure to these conditions (more than 12 years). The visual inspection of 62 PV modules has allowed to observe and determine the degradation modes such as, EVA discoloration, delamination, busbar corrosion, cracking of solar cell, glass breakage, AR coating and solder bond. The degradation evaluation of three modules with different defects was also performed, using (I-V/P-V) characteristics and the degradation rates of the parameters (Pmax, Imp, Vmp, Isc, Voc, FF) at Standard test conditions (STC) in order to compare with the nominal data delivered by the manufacturer of photovoltaic panels. Finally, the combination of the partial shading effect and the presence of EVA browning defect was examined to assess the changes in I-V and P-V curves caused by the drop in electrical parameters.

Abstract A three dimensional numerical model of the northwest (NW) Sabalan geothermal system was developed on the basis of the designed conceptual model from available field data. A numerical model of the reservoir was expressed with a grid system of a rectangular prism of 12 km × 8 km with 4.6 km height, giving a total area of 96 km2. The model has 14 horizontal layers ranging in thickness between 100 m to 1000 m extending from a maximum of 3600 to −1000 m a.s.l. Fifteen rock types were used in the model to assign different horizontal permeabilities from 5.0 × 10−18 to 4.0 × 10−13 m2 based on the conceptual model. Natural state modeling of the reservoir was performed, and the results indicated good agreements with measured temperature and pressure in wells. Numerical simulations were conducted for predicting reservoir performances by allocating production and reinjection wells at specified locations. Three different exploitation scenarios were examined for sustainability of reservoir for the next 30 years. Effects of reinjection location and required number of makeup wells to maintain the specified fluid production were evaluated. The results showed that reinjecting at Site B, immediate adjacent to production zone, is most effective for pressure maintenance of the system. On the base of existing data and assumptions the reservoir can sustain producing fluid equivalent to 50 MWe of electricity for more than 30 years. The reservoir can produce the maximum amount of fluids equivalent to 90–100 MWe for only 5 years, but the production capacity decreases to 50 MWe after 20 years of operation because of pressure and enthalpy drop. The reservoir can sustain 50 MWe over 100 years that can be defined as a sustainable production level of the field.

Abstract After reviewing 16 recent studies, we 1. (i) identify the general approaches used to estimate customer outage costs, 2. (ii) ascertain the relative merits of each approach, and 3. (iii) determine the extent to which existing studies can provide accurate and meaningful estimates. We present cost estimates on a common denominator, explain variations in the results, and suggest areas for future research.

Abstract Demand response aims to change the energy consumption patterns of normal customers in response to changes in price rate or incentive offers. This process reduces peak loads and in turn potentially lowers the energy cost for customers. In this study, we propose a new demand response scheme on the basis of an adaptive consumption level pricing scheme. On the one hand, this strategy encourages customers to manage their energy consumption and consequently lower their energy bill. On the other hand, it allows utilities to manage the aggregate consumption and predict load requirement. Unlike other pricing schemes, such as block tariff and time-of-use, the proposed pricing scheme can lower the energy bill of about 73% of customers, assuming that the total utility revenue is the same for all pricing schemes. On the basis of the currently available schemes in the literature, we find that the proposed method has significant advantages over other schemes in terms of fairness in charging customers.

The Asia-Pacific region has the most rapidly growing energy demand in the world and will continue to have an increasing impact on world energy demand. Given the heterogeneity of economies in the region, any regional demand analysis has to be constructed country by country. In undertaking the demand forecasts provided in this study, scenarios were developed for high, low, and base cases that take into account variations in economic performance, prices, and fuel substitution in individual nations and in the region as a whole. China is included in the aggregate regional data provided in this article. Data from the countries of the former Soviet Union are not included in the regional totals in this article and are discussed separately in article 4.

Abstract We will consider cumulative socioeconomic impacts in environmental impact assessment and mitigation processes. Cumulative impacts from several simultaneous projects are greater than aggregate impacts for projects built in isolation. Impacts of energy facilities provide a baseline for potential cumulative impacts in a number of regions. Case studies illustrate the importance of cumulative impacts, as well as their uneven treatment in the environmental impact statement (EIS) process. Important institutional, legal, and practical considerations associated with cumulative impacts are analyzed, and descriptions are offered of how cumulative impact assessments can be used as tools in decision-making.