• Energy Research
• 7. Clean energy close
• US close
• IN close
• AU close

Abstract The residual biomass of Cupriavidus necator , a biopolyester-producing bacterium, was liquefied in subcritical water at 300 °C. The hydrophobic organic compounds, accounting for about 45% carbon of the original biomass, were recovered with methylene dichloride for analysis. The organic compounds included hydrocarbons such as long chain alkane and benzene, and nitrogen-containing heterocycles such as pyrroles and indoles. The liquid had the similar elemental composition (C, H, O, N) and high heating value (34 MJ kg −1 HHV) of the bio-oils derived from microalgae biomass.

In order to reliably simulate the energy yield of photovoltaic (PV) systems, it is necessary to have an accurate model of how the PV modules perform with respect to irradiance and cell temperature. Building on previous work that addresses the irradiance dependence, two approaches to fit the temperature dependence of module power in PVsyst have been developed and are applied here to recent multi-irradiance and -temperature data for a standard Yingli Solar PV module type. The results demonstrate that it is possible to match the measured irradiance and temperature dependence of PV modules in PVsyst. As a result, improvements in energy yield prediction using the optimized models relative to the PVsyst standard model are considered significant for decisions about project financing.

After a halt of four years, the n TOF spallation neutron facility at CERN has resumed operation in November 2008 with a new spallation target characterized by an improved safety and engineering design, resulting in a more robust overall performance and e cient cooling. The rst measurement during the 2009 run has aimed at the full characterization of the neutron beam. Several detectors, such as calibrated ssion chambers, the n TOF Silicon Monitor, a Mi- croMegas detector with 10B and 235U samples, as well as liquid and solid scintillators have been used in order to characterize the properties of the neutron uence. The spatial pro le of the beam has been studied with a specially designed \X-Y

Abstract Nanofluids have been introduced for the enhancement in the heat transfer phenomena in the last few years. In this paper a corrugated bottom triangular solar collector has been studied introducing water based nanofluids inside the enclosure. The corrugated bottom is kept at a constant high temperature whereas the side walls of the triangular enclosure are kept at a low temperature. Three types of nanoparticles are taken into consideration: Cu, Al2O3, and TiO2. The effect of solid volume fraction (ϕ) of the nanoparticle of nanofluid has been studied numerically by Galerkin weighted residual method of finite element for a wide range of Grashof number (Gr) 104–106. Calculations are carried out for ϕ = 0, 0.05, 0.08, and 0.1 and dimensionless time, τ = 0.1, 0.5, and 1. For the specified conditions streamlines and isotherm contours are obtained and detailed results of the interaction between different parameters are studied using overall Nusselt number. It has been found that both Grashof number and solid volume fraction have significant influence on streamlines and isotherms in the enclosure. It is also found that heat transfer increased by 24.28% from the heated surface as volume fraction ϕ increases from 0% to 10% at Gr = 106 and τ = 1 for copper water nanofluid.

Abstract This paper contributes to the existing literature as well as policy debates by examining energy intensity and its determinants in China's regional economies. The analysis is based on a comprehensive database of China's regional energy balance constructed for this project. Through its focus on regional China, this study extends the existing literature, which mainly covers nationwide studies. It is found in this paper that energy intensity declined substantially in China. The main contributing factor is the improvement in energy efficiency. Changes in the economic structure have so far affected energy intensity modestly. Thus there is considerable scope to reduce energy intensity through the structural transformation of the Chinese economy in the future.

AbstractRecently, modern power systems depend heavily on MicroGrids (MGs), which can accommodate Distributed Energy Resources (DERs) economically and with high flexibility. MGs integrated with DERs can assist in enhancing energy security, significant cost savings, and reduction in emission of greenhouse gases. In this paper, the assessment of operating performance of proposed MG system with DERs is employed to investigate the multi‐objective problems of cost optimization and economic scheduling. A grid‐connected Micro‐grid (MG) combined with solar photovoltaic (PV), wind turbine (WT), fuel cell (FC), and Battery Energy Storage System (BESS) is implemented to model the problem. This proposed model is considered as a test system for cost optimization and battery charging/discharging optimization. The developed framework is presented as multi‐objective function with constraints that can be tackled using an effective optimization technique. The above stochastic multi‐objective problem is optimized using various commonly used Physics based Meta‐heuristic techniques such as Simulated Annealing (SA), Harmony Search (HS), Slime Mold Algorithm (SMA), Gravitational Search Algorithm (GSA), Black Hole Optimization (BHO), Sine Cosine Algorithm (SCA), Multiverse optimization (MVO) and Lightning Search Algorithm (LSA). The assessment of the aforementioned physics‐based optimization techniques used on the proposed MG test system is compared using the results. According to the analysis, Black Hole Optimization (BHO) and Lightning Search Algorithm (LSA) both provide greater cost savings overall and for battery charging, respectively. The suggested optimization methods will take the BESS charging/discharging pattern and total cost savings into account.

The Energy Information Administration (EIA) of the U.S. Department of Energy has projected net electricity generation through 2040 for ten selected countries and the world. These ten countries including China and the U.S. are projected to produce 70% of the world electricity generation. Some of the past projections by EIA have been rated too conservative. Using a simple experience curve, we produce alternative projections for comparison. Our projections are significantly higher for eight out of the ten countries. Utilities operating in these eight countries may need to reexamine their plan for future net electricity generation.

This paper presents a comprehensive review of various techniques employed to enhance the low voltage ride through (LVRT) capability of the fixed-speed induction generators (FSIGs)-based wind turbines (WTs), which has a non-negligible 20% contribution of the existing wind energy in the world. As the FSIG-based WT system is directly connected to the grid with no power electronic interfaces, terminal voltage or reactive power output may not be precisely controlled. Thus, various LVRT strategies based on installation of the additional supporting technologies have been proposed in the literature. Although the various individual technologies are well documented, a comparative study of existing approaches has not been reported so far. This paper attempts to fill this void by providing a comprehensive analysis of these LVRT methods for FSIG-based WTs in terms of dynamic performance, controller complexity, and economic feasibility. A novel feature of this paper is to categorize LVRT capability enhancement approaches into three main groups depending on the connection configuration: series, shunt, and series-shunt (hybrid) connections and then discuss their advantages and limitations in detail. For verification purposes, several simulations are presented in MATLAB software to demonstrate and compare the reviewed LVRT schemes. Based on the simulated results, series connection dynamic voltage restorer (DVR) and shunt connection static synchronous compensators (STATCOM) are the highly efficient LVRT capability enhancement approaches.