• Energy Research
• 2021-2025close
• Restricted close
• engineering and technology close

Abstract High power pseudocapacitors are extremely relevant to answer specific needs in the current energy transition arena and to implement an efficient renewable energy society. However, literature shows that are still open gaps concerning improvement of their energy density at high power, conversion efficiency, cost and cycle life. Electrodes based on active transition metal compounds, and in particular metal sulphides, evidence high potential to meet these objectives. This work discusses the dependence on the synthesis route of the charge storage mechanism of manganese sulphide-based materials and relates the pseudocapacitive response of these electrodes with their polycrystalline nature. Results reveal that a manganese oxy-sulphide mixture can achieve a high specific capacitance of 231 F.g−1 at 0.5 A/g in a 0.65 V active window. These values represent a 31.5 % increase compared to pure rambergite, γ-MnS, and 436 % compared to pure hausmannite Mn3O4 prepared under the same conditions. Moreover, the results show that manganese oxy-sulphide electrodes are characterized by good charge retention (73%), and superior long term capacity retention (above 86%) after 5000 cycles, evidencing potential for high power energy storage applications.

It is now environmentally desirable and legally mandatory to add renewable fuels such as ethanol or ethyl tert-butyl ether to gasoline. However, biofuels affect, among other properties, the distillation curve of gasoline, which is subject to strict regulations. This work presents a simple mathematical model capable of accurately predicting the influence that the addition of these oxygenates has on the distillation curve. In order to address this issue, it is essential to find a simple mathematical correlation between the boiling temperatures of the hydrocarbons present in gasoline and the properties (boiling temperature and volume or molar concentration of ethanol) of the corresponding azeotropic mixtures formed with ethanol. Power functions have been assumed to model the temperature composition diagrams of the vapour-liquid equilibrium. Experimental data previously published by these and other authors have been used to fit and validate the model. The results provided by the mathematical model can be of great interest to understand the process of fuel evaporation in spark-ignition engines or the adjustment of distillation cuts in refineries, in order to comply with the regulations, in terms of the distillation curve, after adding ethanol or ethyl tert-butyl ether.

The present paper exhibits a real time assessment of a robust Energy Management Strategy (EMS) for battery-super capacitor (SC) Hybrid Energy Storage System (HESS). The proposed algorithm, dedicated to an electric vehicular application, is based on a self-gain scheduled controller, which guarantees the H∞ performance for a class of linear parameter varying (LPV) systems. Assuming that the duty cycle of the involved DC-DC converters are considered as the variable parameters, that can be captured in real time, and forwarded to the controller to ensure both; the performance and robustness of the closed-loop system. The subsequent controller is therefore time-varying and it is automatically scheduled according to each parameter variation. This algorithm has been validated through experimental results provided by a tailor-made test bench including both the HESS and the vehicle traction emulation system. The experimental results demonstrate the overall stability of the system, where the proposed LPV supervisor successfully accomplishes a power frequency splitting in an adequate way, respecting the dynamic of the sources. The proposed solution provides significant performances for different speed levels.

The most widely used process for hydrogen production is steam methane reforming. It can be carried out using a membrane reactor in which simultaneous hydrogen production and purification occur. Mathematical modeling of these reactors plays a key role in the selection of the design and operating parameters that yield high performance for the reactor. This review study discusses, synthesizes, and compares different mathematical modeling studies on the packed bed membrane reactors for hydrogen production from methane found in the literature. Different approaches used in these modeling studies for the hydrogen permeation steps, reaction kinetic expressions, phases involved (pseudo-homogeneous and heterogeneous), and spatial dimensions (one, two, and three dimensional) are given.

Thermal performance of SS-PCM composites, simulating building envelope conditions, is difficult to asset with traditional laboratory equipment. However, in this work, the evaluation of three SS-PCM based on eutectic fatty acid mixtures of capric-myristic (CA/MA), lauric-myristic (LA/MA) and palmitic-stearic (PA/SA) was accomplished by a testing setup that allows to test samples in steady-state and dynamic conditions. Moreover, a SS-PCM-based acrylic plaster was evaluated as a fiber cement siding finish. The obtained values were used to calculate the thermal transmittance (U-value), heat storage capacity, and thermal inertia parameters under a simulated diurnal cycle. Results showed that the use of phase change materials in powder form increase thermal lag between 148% and 180% and present a decrement factor <0.2. Furthermore, building envelopes as fiber cement siding with a SS-PCM-based acrylic plaster coating decreased 20.8% the indoor temperature, increase 67.26% the thermal lag and decrease 9% of the decrement factor. The authors are pleased to acknowledge the financial assistance of the “Ministerio de Ciencia, Tecnología e Innovación-MINCIENCIAS” through the PhD grant 758-2016-Contract 036–2016, Universidad de Antioquia and Sumicol S.A.S. The work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.

The olive oil mill wastewater (OMW) is a by-product (with a high organic load) derived from the production of the olive oil. The OMW steam reforming (OMWSR) process was studied herein, aiming to decrease the environmental damage of such effluents; simultaneously, the waste is economically and energetically valorized with the H-2 production. Several Ni-containing catalysts were prepared and tested to compare their performances for the OMWSR using a synthetic OMW effluent; still, stability tests were also carried out. The materials were extensively characterized: thermogravimetric analysis, temperature programmed oxidation/reduction, temperature-programmed desorption of CO2/NH3, chemisorption of H-2, inductively coupled plasma optical emission spectrometry and physical adsorption-desorption of N-2 at-196 & DEG;C. Amongst the materials tested, the Ni-Ru/SiO2 sample stood out, exhibiting high catalytic performance: at 400 & DEG;C, the H-2 yield (> 8 mol(H2)& BULL;mol(OMW)(-1)) and conversion of total organic carbon (asymptotic to 75%) were high during all the 24 h of the long-term test, with only a small deactivation being noticed.

The incorporation of recycled materials in concrete as a partial replacement of cement is becoming an alternative strategy for decreasing energy-intensive and CO2 emissions imputable to the cement manufacture, while investigating new potential uses of such multifunctional materials for environmental sustainability opportunities. Therefore, low-cost and worldwide availability of by-products materials is being assessed for sensible heat thermal energy storage applications based on cementitious materials. A greater concern is especially required focusing on the thermal stability of cement paste under high temperature cycled conditions. Moreover, compatibility between cement type and supplementary cementitious materials is determinant for the proper performance reliability. In this study, benchmark cement types were selected, i.e., ordinary Portland and calcium aluminate. Six supplementary cementitious materials were added to both types of cement in a content of 10 % and 25 %. Thermo-mechanical properties were studied before and after 10 thermal cycles from 290 to 650 ◦C. Results after thermal cycling showed that calcium aluminate cement paste mixtures maintained their integrity. However, most ordinary Portland cement paste mixtures were deteriorated: only mixtures with 25 % cement replacement with chamotte, flay ash, and ground granulated blast furnace slag remained without cracks. Calcium aluminate cement paste mixtures obtained the highest compressive strength, for partial replacement of cement with 10 % of chamotte, ground granulated blast furnace slag, and iron silicate. The incorporation of supplementary cementitious materials did not increase the thermal conductivity. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors at University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme and by the Italian project ‘SOS-CITTA’ supported by Fondazione Cassa di Risparmio di Perugia under grant agreement No 2018.0499.026. Laura Boquera acknowledgments are due to the PhD school in Energy and Sustainable Development from University of Perugia. Laura Boquera would like to acknowledge the financial support provided by UNIPG – CIRIAF InpathTES project. The authors also thank the companies that provided the material to make possible this experimental research: Arciresa, Abrasivos Mendiola EDERSA—Masaveu Industria, General Admixtures S.p.A, Mapei, Ciments Molins industrial, and Promsa for the material supplied in this research. Financial support of the UNIPG-CIRIAF team has been achieved from the Italian Ministry of University and Research (MUR) in the framework of the Project FISR 2019: “Eco Earth” (code 00245) and it is gratefully acknowledged.

Abstract The gas suction rate of a conventional liquid–gas ejector pump was measured on a modular pilot plant unit utilizing convergent nozzles and a water–air system. Hydraulic characteristics were measured for various water flow rates, suction and discharge pressures, and ejector geometries, covering a wide range of configurations and operating conditions. The device configurations, providing the most stable and reproducible results, were identified. The air flow rates measured with these configurations were correlated by a simple, three-parameter correlation with a relative standard deviation (RSD) of 11%. The performance and behavior of the ejector in less stable configurations are discussed and the recommendations for the design of optimally operating units are provided. Finally, the correlation is tested against available literature data. The ejectors with comparable geometry agree well with the proposed correlation (within 20% RSD). The reasonable agreement with the discussed differences is found for other literature data. This comparison results in the validation of the proposed correlation to provide a safe prediction of minimal gas entrainment in units of various geometries, orientation and operating conditions.

Abstract Concrete is identified in the literature as a suitable material for thermal energy storage applications, with even innovative application potentials such as storage media in concentrating solar power plants. To ensure a suitable heat transfer among concrete components, the binder material of concrete (cement paste) require further research and understanding to this aim. In particular, the thermal stability of cement paste under temperature cycled conditions arises as a research gap. In this study, ordinary Portland and calcium aluminate cement types were selected using a low water-cement ratio. Thermo-mechanical properties were studied before and after 1, 10, and 25 or 50 thermal cycles at 200 °C, 400 °C, 600 °C, and 800 °C. Although ordinary Portland cement paste showed micro-cracking propagation after 25 thermal cycles from ambient temperature to 200 °C and 400 °C, both cement pastes preserved their integrity, being compressive strength higher in ordinary Portland cement. On the contrary, after 25 or 50 thermal cycles at 600 °C and 800 °C, only calcium aluminate cement preserved its integrity, while ordinary Portland cement revealed a fragmentation status. Despite the compressive strength decrease in calcium aluminate paste at 600 °C and 800 °C, as a result of porosity increase, the properties were maintained after 10 thermal cycles. However, thermal conductivity in calcium aluminate paste was reduced nearly 50% after the first cycle at temperatures higher than 200 °C.