• Energy Research
• other engineering and technologies close
• ZENODO close

Editorial Complex Optimization and Simulation in Power Systems

This study focuses on formulating the most sustainable concrete by incorporating recycled concrete aggregates and other products retrieved from construction and demolition (C&D) activities. Both recycled coarse aggregates (RCA) and recycled fine aggregates (RFA) are firstly used to fully replace the natural coarse and fine aggregates in the concrete mix design. Later, the cement rich ultrafine particles, recycled glass powder and mineral fibres recovered from construction and demolition wastes (CDW) are further incorporated at a smaller rate either as cement substituent or as supplementary additives. Remarkable properties are noticed when the RCA (4–12 mm) and RFA (0.25–4 mm) are fully used to replace the natural aggregates in a new concrete mix. The addition of recycled cement rich ultrafines (RCU), Recycled glass ultrafines (RGU) and recycled mineral fibres (RMF) into recycled concrete improves the modulus of elasticity. The final concrete, which comprises more than 75% (wt.) of recycled components/materials, is believed to be the most sustainable and green concrete mix. Mechanical properties and durability of this concrete have been studied and found to be within acceptable limits, indicating the potential of recycled aggregates and other CDW components in shaping sustainable and circular construction practices. The authors wish to acknowledge the financial support from EU Horizon 2020 Project VEEP ‘‘Cost-Effective Recycling of C&DW in High Added Value Energy Efficient Prefabricated Concrete Compo-nents for Massive Retrofitting of our Built Environment” (No.723582).

This paper reports the generalized results of computer simulation of physical processes at a rotor-disk film evaporating plant. Optimization of the operation mode cannot be achieved without establishing patterns in the course of physical processes. We have proposed a computer model of hydrodynamics that accounts for all the features, initial and boundary conditions. The results of computer simulations make it possible to adequately assess the effectiveness of using a rotor-disk film evaporating plant (RDFVP) for the concentration of heat-labile materials. We have established patterns in the course of physical processes within a structure of RDFVP by using computer simulation of hydrodynamics in the programming environment ANSYS and applying a k-e turbulence model. The result of simulation is the derived velocity fields of the concentrated fluid (w max =0.413 m/s) and the gas phase (w max =8.176 m/s), as well as the magnitude of values for shear stress τ=0.94·10 -6 Pa. It was established that the gas heat-carrier is characterized by the highly-turbulent flows with maximum values for kinetic energy TKE max =8.985·10 -1 m 2 /s 2 . The reliability of results is ensured by the correctness, completeness, and adequacy of physical assumptions when stating the problem and while solving it using the computer aided design system ANSYS. It has been established that the proposed structure is an effective alternative to equipment for the concentration of solutions. The data obtained could be used when designing heat-and-mass-exchange equipment for the highly efficient dehydration of thermolabile materials

The energy expended to cool the occupied areas by air conditioners represents a substantial share of the total energy exhausted in buildings. Therefore, developing strategies to reduce this energy is crucial. One of the preponderance strategies adopted to depreciate energy consumption in buildings is the occupancy-based strategy. In this research, an innovative model was established to achieve the goal of reducing cooling energy consumed in buildings based on occupancy-based combined with a constant temperature setpoint strategy in two phases, and each phase engrosses in 20 days. Phase one is to identify the extent of cooling energy employed according to the use of room occupants and its costs in consumption was 276.01 kWh after completion of this phase. Sequentially, constructing phase two intended to reduce cooling energy consumption by employing an automatic air-conditioner (AC) control strategy relying on an improved human detection algorithm with a 25℃ as temperature setpoint, resulting in 112.45 kWh of consumption. To complement the motives for elaboration, the human detection measurement using you only look once (YOLO) improved by applying pre-processing algorithms to reach an average human detection enhancement of 21.2%. The proposed model results showed that potential savings associated with the embraced strategy decreases by more than anticipated as the amount of reduced energy reached 59% savings.

Quarterly sampling campaigns were carried out during year 2019 to study the effects of organic pollution on the diversity and abundance of meiofauna from a polluted coastal system in north-western Mexico. Amongst harpacticoids, the family Miraciidae Dana 1846 was by far the most abundant and diverse, and several new species and the proposal of some new genera of Stenheliinae Brady 1880 and Diosaccinae Sars 1906 will be published elsewhere. Amongst the Diosaccinae, the genus Robertgurneya Apostolov & Marinov 1988 was one of the most abundant. This genus was proposed and diagnosed by Lang (1944, 1948) but after a complex taxonomical history, was made available by Apostolov & Marinov (1988) who proposed an amended diagnosis and designated R. similis similis (Scott A. 1896) as the type species of the genus. Here I propose a new species, Robertgurneya mexicana sp. nov., and give a fully illustrated record of the widely distributed R. rostrata (Gurney 1927). The relationships amongst the species of Robertgurneya are not clear, but the new Mexican species shares with R. falklandiensis (Lang 1936) the elongated inner dimorphic spine on the basis of the male P1. Additionally, a new amended diagnosis for the genus Robertgurneya, as well as the reallocation of R. soyeri (Apostolov 1974) into Typhlamphiascus Lang 1944, and the creation of a new genus, Robertgurneyella gen. nov., for R. spinulosa (Sars 1911) are proposed. 

Air conditioning system is a complex system and consumes the most energy in a building. Any fault in the system operation such as cooling tower fan faulty, compressor failure, damper stuck, etc. could lead to energy wastage and reduction in the system’s coefficient of performance (COP). Due to the complexity of the air conditioning system, detecting those faults is hard as it requires exhaustive inspections. This paper consists of two parts; i) to investigate the impact of different faults related to the air conditioning system on COP and ii) to analyse the performances of machine learning algorithms to classify those faults. Three supervised learning classifier models were developed, which were deep learning, support vector machine (SVM) and multi-layer perceptron (MLP). The performances of each classifier were investigated in terms of six different classes of faults. Results showed that different faults give different negative impacts on the COP. Also, the three supervised learning classifier models able to classify all faults for more than 94%, and MLP produced the highest accuracy and precision among all.

Nail polish, in particular gel nail polish, is the most used cosmetic product. The components of the gel polish, which determine both toxicity and consumer color properties, are pigments. Zn-Al layered double hydroxides intercalated with anionic food dyes are promising pigments for use in gel polish. The parameters of the samples of Orange Yellow S-intercalated Zn-Al (Zn:Al=4:1 and Zn:Al=2:1) hydroxides synthesized at pH=8 and pH=11 were studied. The crystal structure of the samples was studied by X-ray phase analysis and thermogravimetry, and the pigment properties – by the method of measuring and calculating color characteristics in the CIELab and XYZ systems. The color characteristics of gel nail polish samples prepared using synthesized pigments were studied in a similar way. X-ray phase analysis and thermogravimetry showed that Zn-Al-Orange Yellow S pigments synthesized at both Zn:Al ratios and pH were layered double hydroxides with the α-Zn(OH) 2 structure. The phenomenon of the decomposition of Zn-Al LDH to ZnO during the synthesis was revealed. As a result, all Zn-Al-Orange Yellow S pigment samples contained both layered double hydroxide and zinc oxide. It was shown that all samples of the Zn-Al-Orange Yellow S pigment obtained at pH 8 and 11 and the ratios Zn:Al=4:1 and Zn:Al=2:1 had high pigment characteristics and are promising for use in gel polish. The samples of gel nail polish with synthesized pigments have a red-orange color (сolor tone 595–604 nm) with high monochromaticity (color purity 63–75 %) and color saturation (48.7–58.3)