• Energy Research
• Closed Access close
• Restricted close
• Embargo close
• 11. Sustainability close
• 6. Clean water close
• 9. Industry and infrastructure close

Abstract Domestic wind turbine manufacturing sector in China has experienced development stages starting from scratch to mass production. During the 11th FYP period (2006–2010), the main goal of wind power policy in China is to promote the commercialization of wind power by large-scale deployment of wind farms. This goal has been realized to a great extent and now the cost of wind power generation is nearly comparable to coal-fired power generation in China. The industry policy, which devotes to mass production of domestic wind turbines, is also largely successful. The purpose of the paper is to provide an overview on wind turbine manufacturing sector in China. The policy evolution in different stages, achievements and challenges pertinent to the sector are addressed in the paper. Key findings are that the misleading industry policy, which provides strong incentive to blind entrance and “competition for scale and price” and restrains innovation as well, is the key obstacle for the sustainable development of the sector. Deficient technology standard and qualification system and the misplaced franchise bidding system also indulge vicious competition and oversupply. Creating a level playground for all turbine supplies, providing strong incentive to innovative manufacturers, establishing thorough and practicable standard and qualification system, and fine-tuning the directive of the franchise bidding system towards technology and service are the primary policy implications proposed by our study.

Lipid productivity of microalgae depends considerably on the method of its cultivation. In the present study, a two-stage culture strategy was conducted to cultivate Chlorella vulgaris to enhance lipid productivity. In the first stage, C. vulgaris was grown in the synthetic medium to obtain maximum biomass concentration. Wastewater is used as a medium for growing microalgae to have commercial and environmental aptitudes for biomass production. The nutrient removal efficiencies were 80.5% (COD), 70% (TN), and 78% (TP). In the second stage, the synergistic effects of nitrogen and NaCl concentration on the lipid productivity was investigated by response surface methodology (RSM) for 2 days. The optimum conditions for relatively high lipid productivity (up to 80 mg L−1 day−1) were 2.6 mg L−1 of nitrogen, 6.3 g L−1 of NaCl, and 4.9 g L−1 of biomass concentration. The value which was predicted by model was in good agreement with the experimental value, as it was determined by the validation experiments. Saturated fatty acid composition was increased by 27.3% under optimized medium compared with synthetic medium, which is very suitable for biodiesel production. According to the above results, it is concluded that the combination of multiple stress conditions can lead to a cost-effective technology of microalgae lipid production.

Anode with good electrocatalytic capabilities is more specifically required to reduce the ohimic losses during microbial fuel cell (MFC) operation. Highly conductive polymers viz., Polyaniline (PANi) and Polyaniline/Carbon nanotube (PANi/CNT) composite were prepared by in situ oxidative chemical polymerization method. Anodes were fabricated independently by coating PANi and CNT/PANi composites on the surface of SSM. The fabricated electrodes were evaluated as anode against stainless steel mess (SSM) as cathode during MFC operation. Maximum bioelectricity generation was observed in SSM-PANi/CNT-anode with power density of 48 mW/m2 and COD removal efficiency of 80% compared with SSM-PANi-anode (38 mW/m2; 65%) and SSM-anode (28 mW/m2; 58%). Bioelectrochemical characterization of the electrode materials using cyclic voltammetry and electrochemical impedance spectroscopy showed high electrocatalytic activity of PANi/CNT composite electrode. The study concluded the efficiency of PANi/CNT composite electrodes as bioanode in operation of MFCs towards achieving increased bioelectricity production along with wastewater treatment.

A promising route to transition wastewater treatment facilities (WWTFs) from energy-consuming to net energy-positive is to retrofit existing facilities with process modifications, residual biosolid upcycling, and effluent thermal energy recovery. This study assesses the economics and life cycle environmental impacts of three proposed retrofits of WWTFs that consider thermochemical conversion technologies, namely, hydrothermal liquefaction, slow pyrolysis, and fast pyrolysis, along with advanced bioreactors. The results are in turn compared to the reference design, showing the retrofitting design with hydrothermal liquefaction, and an up-flow anaerobic sludge blanket has the highest net present value (NPV) of $177.36MM over a 20-year plant lifetime despite 15% higher annual production costs than the reference design. According to the ReCiPe method, chlorination is identified as the major contributor for most impact categories in all cases. There are several uncertainties embedded in the techno-economic analysis and life cycle assessment, including the discount rate, capital investment, sewer rate, and prices of main products; among which, the price of biochar presents the widest variation from $50 to $1900/t. Sensitivity analyses reveal that the variation of discount rates causes the most significant changes in NPVs. The impact of the biochar price is more pronounced in the slow pyrolysis-based pathway compared to the fast pyrolysis since biochar is the main product of slow pyrolysis.

Abstract In the context of climate change, global industrialised nations are grappling with transforming energy networks to support a low carbon future. Using an energy justice framework this work aims to understand holistic outcomes of one low-carbon energy network intervention: demand-side response enacted on domestic heat pumps. By exploring participants’ lived experience of a pilot project, from recruitment to installation and use, this work reveals how injustices were reduced, introduced and amplified. Choice, consent, cost, comfort, disruption, and control are highlighted as key aspects of interest when considering the distributive, procedural, and recognition implications of this domestic innovation. For a net reduction of energy injustices to be realised, we highlight the need for project designers to work in partnership with end users to optimise the benefits for the household and the electricity system. Whilst this is a UK study, the themes and findings are internationally applicable for interventions that aim to harness the flexibility of heating, the largest global energy end-use.

Vehicles with hybrid drive systems, are increasingly more often being equipped with solutions that increase the drive systems efficiency. One of such solutions is to use an increased supply voltage for electric motors of such vehicles. The battery voltage is increased several times in the inverter system in order to increase the electrical power supplied to the electric motor. This article presents possible uses of such voltage amplification (called boost) in urban traffic conditions. The tests used the latest models of vehicles with hybrid drive systems equipped with the same drive units: Lexus NX 300h and Toyota RAV4 Hybrid. The study analyses the conditions of starting such a system and the characteristics of its operation. It has been shown that the amplification of the voltage powering the electrical machinery in both vehicles occurs at high torque values. The maximum voltage amplification–almost threefold (up to 650 V) allows a two-fold increase in the torque of the drive system.

Abstract A change in the thermal environment of an urban area affects health, living conditions, and energy consumption. In urban planning, urban parks are one of the methods for improving the thermal environment and saving cooling energy. Urban park construction can mitigate temperature, but it also causes urban development by increasing local attractiveness. To achieve efficient energy saving through parks in urban planning, the purpose of this study is to investigate the relationship between building energy consumption and urban characteristics both before and after the construction of an urban park. This study targeted Seoul's Gyeongui line forest, which was recently converted into a linear park on the former railway as an urban regeneration project. We analyzed the relationship between energy consumption and urban characteristics using a regression model, focusing on the changes before and after the construction. In this study, urban characteristics include environment, building physical characteristics, and economic variables. The results show that the construction of the urban park reduced not only temperature but also building energy consumption. The energy reduction effect of the park was limited to a marginal distance. Meanwhile, the urban park construction caused land prices to rise and prompted new development, and this changed the urban characteristics of the area and affected energy consumption. Despite changes in urban characteristics, urban park planning is an effective methods of reducing the energy consumption involved in cooling urban areas. We recommend comprehensive consideration of the urban factors when making park policy to reduce urban temperature and energy consumption.

AbstractSlaughterhouses generate highly polluted effluents, and if not treated before discharge can cause major adverse environmental and public health impacts. Treatment of this waste by anaerobic digestion can reduce those impacts while producing a potentially valuable source of energy. The purpose of this study was to investigate this process efficiency under pilot operating conditions for a more accurate scaling up. Blood waste from a slaughterhouse was treated in a pilot‐scale digester of 30 dm3 total volume under mesophilic temperature conditions. Operating parameters such as pH, alkalinity, organic loading, volatile fatty acids, biogas composition, total and volatile solids were monitored in order to study the behavior of the fermentation process. The results show that no significant inhibition were caused by the accumulation of volatile fatty acids, due to the high buffering capacity of treated sludge. An efficient reduction of organic matter was obtained with a COD decrease of about 67% within 40 days of fermentation. The biogas produced was of a good quality with high CH4 yields (above 70%) and low CO2 yields, corresponding to a biomethane potential of 225.9 dm3 CH4/kg TVS. Logistic model described accurately the methane production kinetic and enables an easy process scaling up for industrial applications.

Abstract A consideration of second-law analysis has been extended from the heat exchanger network to an overall energy balance of a chemical process. This enables the simultaneous integration of all kinds of energy-active apparatus (e.g. reactors, compressors, turbines, boilers, refrigerators, coolers, heaters) and hot feeds or effluents into a process flowsheet. The apparatus and the feeds or effluents together represent a utility exchanger network (UEN), process streams are utilized by several types of energy (utilities) that are of a chemical, mechanical, electrical, transmissible, radiative, or heat flow origin. Inherent and avoidable utilities are distinguished. An action of each utility on the enthalpy change of the process stream is represented in a temperature—enthalpy diagram by the corresponding utility stream. Hot utility streams are composed into a hot composite curve (UCC). It sums up the energy inflows and energy production of the system, called energy donors. On the other hand, cold utility streams are composed into a cold UCC that comprises energy outflows and energy consumption (energy acceptors). Process streams are excluded in this step. By matching both UCCs the method enables the direct targeting of an economical overall utility system through is structural and parametric modifications. Targeting is facilitated by using general rules for appropriate integration of energy donors and energy acceptors relative to the utility pinch temperature. At the same time, the improved energy system changes the dynamical performances; the control configuration must be adopted to the new structure of the total system. The method is based on a detailed thermodynamic analysis of process units and is followed by an optimal thermodynamic synthesis of the total system. The final detailed parametrical optimization is similar to the classic pinch analysis. It deals with process streams and brings additional savings. The whole procedure has been tested on an existing chemical process and its effectiveness has been proved.