• Energy Research
• Closed Access close
• Restricted close
• 13. Climate action close
• 11. Sustainability close
• Applied Energy close

Abstract District heating (DH) enables the utilisation and distribution of heating from sources unfeasible for stand-alone applications and combined with cogeneration of heat and power (CHP), has been the cornerstone of Denmark’s realisation of a steady national primary energy supply over the last four decades. However, progressively more energy-efficient houses and a steadily improving heat pump (HP) performance for individual dwellings is straining the competitive advantage of the CHP–DH combination as DH grid losses are growing in relative terms due to decreasing heating demands of buildings and relatively high DH supply temperatures. A main driver for the DH water temperature is the requirements for domestic hot water (DHW) production. This article investigates two alternatives for DHW supply: (a) DH based on central HPs combined with a heat exchanger, and (b) a combination of DH based on central HPs and a small booster HP using DH water as low-temperature source for DHW production. The analyses are conducted using the energyPRO simulation model and are conducted with hourly varying factors; heating demands, DH grid losses, HP coefficient of performance (COP) and spot market prices in order to be able to analyse the relative performance of the two options and their performance over the year. Results are also compared to individual boilers and individual HPs. The results indicate that applying booster HPs enables the DH system to operate at substantially lower temperature levels, improving the COP of central DH HPs while simultaneously lowering DH grid losses significantly. Thus, DH performance is increased significantly. Additionally, performance for the DH HP with booster combination is considerably better than individual boiler or HP solutions.

Abstract This paper presents a novel multi-time-stage input–output-based modeling framework for simulating the dynamics of bioenergy supply chains. One of the key assumptions used in the model is that the production level at the next time-stage of each segment of the energy supply chain adjusts to the output surplus or deficit relative to targets at the current time period. Furthermore, unlike conventional input–output models, the technology matrix in this approach need not be square, and thus can include coefficients denoting flows of environmental goods, such as natural resources or pollutants. Introducing a feedback control term enables the system to regulate the dynamics, thus extending the model further. This is an important feature since the uncontrolled dynamic model exhibits oscillatory or unstable behavior under some conditions; in principle, the control term allows such undesirable characteristics to be suppressed. Numerical simulations of a simple, two-sector case study are given to illustrate dynamic behavior under different scenarios. Although the case study uses only a hypothetical system, preliminary comparisons are made between the simulation results and some broad trends seen in real bioenergy systems. Finally, some of the main policy implications of the model are discussed based on the general dynamic characteristics seen in the case study. In particular, insights from control theory can be used to develop policy interventions to impart desirable dynamic characteristics to nascent or emerging biofuel supply chains. These interventions can be used to guide the growth of bioenergy supplies along final demand trajectories with minimal fluctuation and no instability.

Shale gas, due to its clean-burning and efficient nature, is becoming an increasingly promising alternative energy resource. It is commonly held that promoting shale gas development will gradually play a significant role in meeting the energy needs of economic and social development as well as reducing harm to the environment. Given the significant implications, many countries are pursuing shale gas opportunities. However, numerous concerns have been raised about the economics of shale gas development, as it is difficult to evaluate. Accurately evaluating the economic viability of shale gas development to reduce investment risks and increase investment opportunity is the key issue that needs to be urgently addressed. This paper presents a systematic review and examination of the technical and economic evaluation techniques for the development of shale gas to provide an overview of their current status. Over time, some progress has been made in existing technical–economic evaluation techniques. It is worth noting that these techniques need to be further improved to more precisely assess the economic feasibility of developing shale gas for assisting investment decisions effectively. For this reason, various potentially useful ideas and approaches are presented to propose some potential improvement in evaluation techniques for shale gas development, which may materialize in possible future trends.

Abstract A variety of novel, recyclable and reusable, construction materials has already been studied within literature during the past years, aiming at improving the overall energy efficiency ranking of the building envelope. However, several studies show that a delicate control of indoor climating elements can lead to a significant performance improvement by exploiting the building’s savings potential via smart adaptive HVAC regulation to exogenous uncertain disturbances (e.g. weather, occupancy). Building Optimization and Control (BOC) systems can be categorized into two different groups: centralized (requiring high data transmission rates at a central node from every corner of the overall system) and decentralized 1 (assuming an intercommunication among neighboring constituent systems). Moreover, both approaches can be further divided into two subcategories, respectively: model-assisted (usually introducing modeling oversimplifications) and model-free (typically presenting poor stability and very slow convergence rates). This paper presents the application of a novel, decentralized, agent-based , model-free BOC methodology (abbreviated as L4GPCAO) to a modern non-residential building (E.ON. Energy Research Center’s main building), equipped with controllable HVAC systems and renewable energy sources by utilizing the existing Building Management System (BES). The building testbed is located inside the RWTH Aachen University campus in Aachen, Germany. A combined rule criterion composed of the non-renewable energy consumption (NREC) and the thermal comfort index – aligned to international comfort standards – was adopted in all cases presented herein. Besides the limited availability of the specified building testbed, real-life experiments demonstrated operational effectiveness of the proposed approach in BOC applications with complex, emerging dynamics arising from the building’s occupancy and thermal characteristics. L4GPCAO outperformed the control strategy that was designed by the planers and system provider, in a conventional manner, requiring no more than five test days.

Over the past three decades, Swedish energy policy has evolved in three major stages—oil reduction, phase-out of nuclear energy, renewable energy—each with a different focus. Since 1977, Swedish law has required municipalities to develop an energy plan that addresses the supply, distribution, and use of energy. Whether such plans have contributed to the development of local energy-systems has been a subject for debate. This paper is based on a study of 12 municipal energy-plans that attempted to control and develop local energy-systems in southern Sweden. The analysis examines how municipalities promote oil reduction, efficient energy use, and the use of renewable energy. The plans varied in planning processes, contents, and level of ambition. The results of the study show that the contents of the plans follow the national energy-policies with respect to reduction of oil use, improved energy efficiency, and increased use of renewable energy.

Abstract In the past, most studies considered solar as a drawback to road pavement, especially the asphalt pavement. Not only its radiation causes the asphalt aging, simultaneously with high temperature, asphalt pavement contributes to the urban heat island (UHI) effect. In recent, as the world becomes more supportive towards implementing sustainable energy as the alternatives to the scarcity of non-renewable resources, utilizing the abundant solar radiation as the main source of energy has gradually attracted attention from both industries and academia with its potentials, including solar application on roads. Nevertheless, more researches have focused on the potential energy collection with less consideration to simultaneously overcome the side effects of abundant solar radiation on its lifecycle. This study found the necessity to review a comprehensive correlation between solar radiation and asphalt pavement from both positive and negative effects. The negative effects included asphalt aging and its effects on surroundings i.e. UHI effect. Meanwhile, the positive effects included exhaust purification and solar energy conversion into other forms of energy that can be used by humans using pavement solar heat collection for winter snowmelt, thermoelectric technology and photoelectric technology to convert solar energy into electrical energy. The cases in various application scenarios were analysed and summarized and the existing problems in the current research were proposed in this paper. Also, the reflection on the transformation of road design concept from “avoiding harm” to “seeking profit” was included. Finally, a new concept of “solar-road harmonious symbiosis” for future road application was proposed based on a comprehensive review of previous published works. It is also the new suggestion to scholars on the treatment of solar diseases on roads to prolong its symbiosis functions.

Abstract Current conventional agricultural systems using intensive energy has to be re-vitalized by new integrated approaches relying on renewable energy resources, which can allow farmers to stop depending on fossil resources. The aim of the present study was to compare wheat production in dryland (low input) and irrigated (high input) systems in terms of energy ratio, energy efficiency, benefit/cost ratio and amount of renewable energy use. Data were collected from 50 irrigated and 50 dryland wheat growers by using a face-to-face questionnaire in 2009. The results showed that the total energy requirement under low input was 9354.2 MJ ha −1 , whereas under high input systems it was 45367.6 MJ ha −1 . Total energy input consumed in both dryland and irrigated systems could be classified as direct, indirect, renewable and non-renewable energies which average in two wheat production systems were 47%, 53%, 24% and 76%, respectively. Energy ratios of 3.38 in dryland and 1.44 in irrigated systems were achieved. The benefit–cost ratios were 2.56 in dryland and 1.97 in irrigated wheat production systems. Based on the results of the present study, dry-land farming can have a significant positive effect on energy-related factors especially in dry and semi-dry climates such as Iran.

Abstract Computable general equilibrium models are becoming popular for simulating emissions trading systems. However, these models make various assumptions about the production structure and the possibilities of substituting energy for productive factors or inputs. Therefore, this study aims to analyze how different options to incorporate energy into the nested production structure of a computable general equilibrium model affect the obtained impacts when an emissions trading system is implemented. A flexible computable general equilibrium model called ECOMODEL is developed, which is the first model that allows choosing any of the three nested production structures most used in the literature (KEL-M, KL-EM, or KLE-M). The Chilean economy is used as a case study since there is a current database with high disaggregation of the energy sector for calibrating the computable general equilibrium model. The results show that the simulated impacts with KEL-M and KL-EM structures are the best when elasticities of substitution equal to the values ​​most frequently used in previous studies are chosen. However, the KEL-M structure that considers energy as a substitute for capital provides overly optimistic environmental results when high elasticities of substitution are used, obtaining the lowest reduction in Gross Domestic Product and the lowest price of the emissions trading system. Furthermore, the KLE-M structure gives unrealistic results regardless of the elasticities of substitution used. In consequence, a KL-EM nested production structure should be prioritized to simulate an emissions trading system since it provides realistic results and is less sensitive to the values of the elasticities of substitution.

Abstract The urge to increase renewable energy penetration into the power supply mix has been frequently highlighted in response to climate change. South Korea was analyzed as a case study for which the government has shown motivation to increase renewable energy penetration. Herein, a hybrid renewable energy system (HRES) including solar and wind energies were selected due to their relatively stable and mature technology. In addition, Power-to-X has been incorporated to cover other renewable energy options such as hydrogen and synthetic natural gas (SNG). Therefore, an approach of forecasting the weather characteristics and demand loading over a relatively long timeframe was implemented via deep learning techniques (LSTM and GRU) and statistical approaches (Fbprophet and SARIMA), respectively. A deployment strategy incorporating HRES and Power-to-X is then proposed in correspondence to the forecasted results of the 15 regions considered in this study. An extension of this, the reliability of the designed system is further assessed based on the probability of the demand losses with the aid of Monte-Carlo simulation. With the proposed deployment strategy, a total annual cost of 9.88 × 1011 $/year and a greenhouse gas reduction of 1.24 × 106 tons/year are expected for a 35% renewable energy penetration. However, only SNG shows relatively competitive cost (at 23.20 $/m3 SNG), whereas the average costs of electricity (0.133 $/kWh) and hydrogen (7.784 $/kg H2) across the regions are yet to be competitive compared to the current market prices. Nonetheless, the priority of deployment across regions has been identified via TOPSIS.