• Energy Research
• Open Access close
• Restricted close
• 12. Responsible consumption close
• 3. Good health close
• Energies close

Recycled polylactic acid (PLAr) was reinforced with treated nanocellulosic hemp fibers for biocomposite fabrication. Cellulosic fibers were extracted from hemp fibers chemically and treated enzymatically. Treated nanocellulosic fibers (NCF) were analyzed by Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Biocomposite fabrication was done with PLAr and three concentrations of treated NCF (0.1%, 0.25%, and 1% (v/v)) and then studied for thermal stability and mechanical properties. Increased thermal stability was observed with increasing NCF concentrations. The highest value for Young’s modulus was for PLAr + 0.25% (v/v) NCF (250.28 ± 5.47 MPa), which was significantly increased compared to PLAr (p = 0.022). There was a significant decrease in the tensile stress at break point for PLAr + 0.25% (v/v) NCF and PLAr + 1% (v/v) NCF as compared to control (p = 0.006 and 0.002, respectively). No significant difference was observed between treatments for tensile stress at yield.

Global fossil fuel reserves are declining due to differential uses, especially for power generation. Everybody can help to do their bit for the environment by using solar energy. Geographically, Bangladesh is a potential zone for harnessing solar energy. In March 2021, the renewable generation capacity in Bangladesh amounted to 722.592 MW, including 67.6% from solar, 31.84% from hydro, and 0.55% from other energy sources, including wind, biogas, and biomass, where 488.662 MW of power originated from over 6 million installed solar power systems. Concurrently, over 42% of rural people still suffer from a lack of electricity, where solar energy can play a vital role. This paper highlights the present status of various forms of solar energy progress in Bangladesh, such as solar parks, solar rooftops, solar irrigation, solar charging stations, solar home systems, solar-powered telecoms, solar street lights, and solar drinking water, which can be viable alternative sources of energy. This review will help decision-makers and investors realize Bangladesh’s up-to-date solar energy scenario and plan better for the development of a sustainable society.

Thermomagnetic heat engines were designed, constructed, and tested, where numbers of gadolinium (Gd) blocks were used to exploit low temperature waste heat. Gadolinium is a rare earth material whose magnetic property changes with temperature, altering between ferromagnetic and paramagnetic. A motion develops in the thermomagnetic heat engine as Gd blocks are exposed to different temperatures causing changes in their magnetic property. A change in the magnetic property of any Gd block is directly related to the resultant torque driving the thermomagnetic heat engine for power production. Among heat engines studied to date, the cylindrical thermomagnetic heat engine was able to develop a maximum mechanical power of 1.1 W at a temperature difference of 45 °C between hot and cold thermal resources. Furthermore, depending on the effectiveness of an electromagnetic generator (EMG) combined with a triboelectric nanogenerator (TENG), the electric power output can be notably improved.

Results-based financing (RBF) programmes in the clean cooking sector have gained increasing donor interest over the last decade. Although the risks and advantages of RBF have been discussed quite extensively for other sectors, especially health services, there is limited research-documented experience of its application to clean cooking. Due to the sheer scale of the important transition from ‘dirty’ to clean cooking for the 4 billion people who lack access, especially in the Global South, efficient and performance-proven solutions are urgently required. This paper, undertaken as part of the work of the UKAid-funded Modern Energy Cooking Services (MECS) programme, aims to close an important research gap by reviewing evidence-based support mechanisms and documenting essential experiences from previous and ongoing RBF programmes in the clean cooking and other sectors. On this basis, the paper derives key strategic implications and learning lessons for the global scaling of RBF programmes and finds that qualitative key performance indicators such as consumer acceptance as well as longer-term monitoring are critical long-term success factors for RBF to ensure the continued uptake and use of clean cooking solutions (CCS), however securing the inclusion of these indicators within programmes remains challenging. Finally, by discussing the opportunities for the evolution of RBF into broader impact funding programmes and the integration of energy access and clean cooking strategies through multi-sector approaches, the paper illustrates potential steps to enhance the impact of RBF in this sector in the future.

The energy base of urban settlements requires greater integration of renewable energy sources. This study presents a “hydrogen city” model with two cycles at the district and building levels. The main cycle comprises of hydrogen gas production, hydrogen storage, and a hydrogen distribution network. The electrolysis of water is based on surplus power from wind turbines and third-generation solar photovoltaic thermal panels. Hydrogen is then used in central fuel cells to meet the power demand of urban infrastructure. Hydrogen-enriched biogas that is generated from city wastes supplements this approach. The second cycle is the hydrogen flow in each low-exergy building that is connected to the hydrogen distribution network to supply domestic fuel cells. Make-up water for fuel cells includes treated wastewater to complete an energy-water nexus. The analyses are supported by exergy-based evaluation metrics. The Rational Exergy Management Efficiency of the hydrogen city model can reach 0.80, which is above the value of conventional district energy systems, and represents related advantages for CO2 emission reductions. The option of incorporating low-enthalpy geothermal energy resources at about 80 °C to support the model is evaluated. The hydrogen city model is applied to a new settlement area with an expected 200,000 inhabitants to find that the proposed model can enable a nearly net-zero exergy district status. The results have implications for settlements using hydrogen energy towards meeting net-zero targets.

The built environment remains a strategic research and innovation domain in view of the goal of full decarbonization. The priority is the retrofitting of existing buildings as zero-emission to improve their energy efficiency with renewable energy technologies pulling the market with cost-effective strategies. From the first age of photovoltaics (PV) mainly integrated in solar roofs, we rapidly moved towards complete active building skins where all the architectural surfaces are photoactive (Building Integrated Photovoltaics - BIPV). This change of paradigm, where PV replaces a conventional building material, shifted the attention to relate construction choices with energy and cost effectiveness. However, systematic investigations which put into action a cross-disciplinary approach between construction, economic and energy related domains is still missing. This paper provides the detailed assessment of a real multifamily building, taking into account retrofit scenarios for making active the building skin, with the goal to identify the sensitive aspects of the energetic and economic effectiveness of BIPV design options. By assuming a real case study with monitored data, the analysis will consider a breakdown of the main individual parts composing the building envelope, by then combining alternative re-configurations in merged clusters with different energy and construction goals. Results will highlight the correlation between building skin construction strategies and the energy and cost parameters by identifying the cornerstones for enhancing efficiency. The outcomes, related to the total life cost, self-consumption/sufficiency, in combination with different building design options (façade, roof, balconies, surface orientations, etc.), provide a practical insight for researchers and professionals to identify renovation strategies by synergistically exploiting the solar active parts towards lower global costs and higher energy efficiency of the whole building system.

The united nations educational, scientific and cultural organization (UNESCO) considers the historic urban landscapes as the world heritages. Managing historic city centers and maintaining historic cores are the emerging challenges for sustainable urban planning. Today, the historic cores form an important part of the economic, social, environmental, and physical assets and capacities of contemporary cities, and play a strategic role in their development. One of the most important approaches to the development of central textures, especially in historical and cultural cities, is the sustainable urban regeneration approach, which encompasses all aspects of sustainability, such as the economic, social, cultural and environmental aspects. To maintain sustainability and regeneration of historic cores of cities, it is necessary to provide insight into the underlying characteristics of the local urbanization. Furthermore, the fundamental assets are to be investigated as indicators of sustainable regeneration and drivers of urban development. In the meantime, a variety of research and experience has taken place around the world, all of which has provided different criteria and indicators for the development of strategies for the historic cores of cities. The present study, through a meta-analytic and survey method, analyzing the experience and research reported in 139 theoretical and empirical papers in the last twenty years, seeks to provide a comprehensive conceptual model taking into account the criteria and indices of sustainable regeneration in historic cores of cities. The quality of the survey has been ensured using the preferred reporting items for systematic reviews and meta-analysis (PRISMA).