• Energy Research
• 7. Clean energy close
• 12. Responsible consumption close
• 6. Clean water close
• IT close
• ES close
• Aurora Universities Network close

This paper presents a one-dimensional finite-volume model of an unglazed photovoltaic/thermal (PVT) solar collector. The unit consists of a conventional solar photovoltaic (PV) collector coupled with a suitable heat exchanger. In particular, the collector includes a roll bond heat exchanger and it is not equipped with back and frame insulation. The system is discretized along the flow direction (longitudinal) of the cogenerative collector. For each finite-volume element of the discretized computational domain, mass and energy balances are implemented. The collector geometry and materials parameters are taken from a commercially available device. An on-field experimental investigation is performed in order to validate the proposed model. The model is used to evaluate both electrical and thermodynamic parameters for each element of the domain and for fixed operating conditions. Finally, a sensitivity analysis is also performed in order to investigate the energetic performance of the cogenerative collector as a function of the main design/environmental parameters.

Efficiency of energy resource use is a key factor for a sustainable energy future. By matching the exergy levels of supply and demand, Energy Quality Management (EQM) of building energy supply systems may achieve more efficient use of energy resources. Beyond this, environmental impact of energy supply systems is another essential issue. This work addresses the influence of EQM on CO 2 emissions in the operation optimization of a Distributed Energy System (DES). A multi-objective linear programming problem is formulated to reduce energy costs and increase the overall exergy efficiency. Total CO 2 emissions are evaluated for the optimized operation strategies of the DES. The operators of the DES can choose the operation strategy from the Pareto front, based on their priorities and also aware of effects on CO 2 emissions. Results demonstrate more efficient use of energy resources and reduction in CO 2 emissions through EQM, as compared with conventional energy supply systems.

This paper investigates the impact of the standard approximations embodied in the well-known Momentum Theory on its performance prediction capabilities. To this aim, the results of the momentum theory, which is still widely used in all Blade Element/Momentum codes for the analysis and/or design of wind turbines, are compared with those obtained with an actuator disk model based on Computational Fluid Dynamics techniques. In this method, the axisymmetric and steady Euler equations are solved with a classical finite volume approach, while the turbine effects are modelled through a set of axial and tangential body forces distributed over a disk shaped region representing the rotor swept surface. Since this method does not rely on the momentum theory simplifying assumptions, it can be suitably employed to verify the momentum theory validity. The analysis is carried out using the well documented experimental data of the National Renewable Energy Laboratory Phase VI wind turbine.

Dolomite-based binders are characterised by interesting technical and environmental features. For their synthesis, sources of both CaO and MgO are required. The idea developed in this work is to couple the synthesis of dolomite-based binders, starting from a natural dolomite, through the concept of concentrated solar energy (needed to drive the endothermal dolomite calcination process) in fluidised bed reactors. To this end, a fluidised bed system, where the concentrated solar radiation is mimicked by the use of Xe-lamps (short-arc), has been set up and operated. Natural dolomite (sieved in the 420-590 ?m size range) was calcined at a nominal temperature of 850 °C, and bed temperature profiles during solar-driven calcination were investigated. Then, four binders were prepared by mixing slaked dolomite (obtained from the hydration of solar calcined dolomite) with either blast furnace slag or coal fly ash as supplementary cementitious materials. The binders were hydrated for curing times ranging from 7 to 56 days. X-ray fluorescence, X-ray diffraction and combined differential thermal and thermogravimetric analyses were employed as characterisation techniques both to analyse the chemical composition of starting materials and to investigate the evolution of the hydration in the four systems.

The joint impact of human activities and climate change on natural resources lead to biodiversity loss. Therefore, it is important to select protected areas through systematic conservation planning. The present study assessed how representative natural habitats are protected under the nature conservation network, and to identify new—but so far insufficiently—protected areas containing these habitats for sustainable management. We used the Marxan model to select the most valuable insufficiently protected natural habitats in the Czech Republic as a representative example for a conservation strategy for Central–Eastern European environments. We set three conservation targets (25%, 50%, and 75%), defining how much percent area of valuable representative natural habitats should be added to the area of the habitats already included in the Nature Protection Network. To implement these conservation targets it is necessary to preserve 22,932 ha, 72,429, ha and 124,363 ha respectively of the conservation targets occurring in the insufficiently protected areas, and 17,255 ha, 51,620 ha, and 84,993 ha respectively of the conservation features in the areas without protection status. Marxan was revealed to be an appropriate tool to select the most valuable and insufficiently protected natural habitats for sustainable management.

Battery participation in the service of power system frequency regulation is universally recognized as a viable means for counteracting the dramatic impact of the increasing utilization of renewable energy sources. One of the most complex aspects, in both the planning and operation stage, is the adequate characterization of the dynamic variation of the state of charge of the battery in view of lifetime preservation as well as the adequate participation in the regulation task. Since the power system frequency, which is the input of the battery regulation service, is inherently of a stochastic nature, it is easy to argue that the most proper methodology for addressing this complex issue is that of the theory of stochastic processes. In the first part of the paper, a preliminary characterization of the power system frequency is presented by showing that with an optimal degree of approximation it can be regarded as an Ornstein–Uhlenbeck process. Some considerations for guaranteeing desirable performances of the control strategy are performed by assuming that the battery-regulating power depending on the frequency can be described by means of a Wiener process. In the second part of the paper, more realistically, the regulating power due to power system changes is described as an Ornstein–Uhlenbeck or an exponential shot noise process driven by a homogeneous Poisson process depending on the frequency response features requested of the battery. Because of that, the battery state of charge is modeled as the output of a dynamic filter having this exponential shot noise process as input and its characterization constitutes the central role for the correct characterization of the battery life. Numerical simulations are carried out for demonstrating the goodness and the applicability of the proposed probabilistic approach.

The influence of compost on the growth of bean plants irrigated with As-contaminated waters and its influence on the mobility of As in the soils and the uptake of As (as NaAs(III)O2) by plant components was studied at various compost application rates (3·10(4) and 6·10(4) kg ha(-1)) and at three As concentrations (1, 2 and 3 mg kg(-1)). The biomass and As and P concentrations of the roots, shoots and beans were determined at harvest time, as well as the chlorophyll content of the leaves and nonspecific and specifically bound As in the soil. The bean plants exposed to As showed typical phytotoxicity symptoms; no plants however died over the study. The biomass of the bean plants increased with the increasing amounts of compost added to the soil, attributed to the phytonutritive capacity of compost. Biomass decreased with increasing As concentrations, however, the reduction in the biomass was significantly lower with the addition of compost, indicating that the As phytotoxicity was alleviated by the compost. For the same As concentration, the As content of the roots, shoots and beans decreased with increasing compost added compared to the Control. This is due to partial immobilization of the As by the organic functional groups on the compost, either directly or through cation bridging. Most of the As adsorbed by the bean plants accumulated in the roots, while a scant allocation of As occurred in the beans. Hence, the addition of compost to soils could be used as an effective means to limit As accumulation in crops from As-contaminated waters.