• Energy Research
• Closed Access close
• Open Source close
• IN close
• JP close
• SDSN Greece close

Abstract The reverse flat-plate collector is a non-concentrating collector. It can collect solar heat at high temperatures which cannot be achieved by conventional non-concentrating collectors. In this paper, the authors have proposed a number of modified versions of the originally proposed reverse flat-plate collector. The new designs are of single, as well as double, absorber type. The thermal performance of these modified reverse flat-plate collectors is compared with that of a single absorber reverse flat-plate collector, as well as with the corresponding normal flat-plate collector. It is found that the new design having two absorbers gives the best thermal performance as compared with other configurations. The analytical models presented in this paper very well describe the experimental results.

Abstract In this work addition of ethanol to high viscosity jatropha methyl ester (JME) through port injection is investigated in order to determine its effect fuel viscosity reduction on diesel engine performance. In addition to viscosity alteration, the impact of ethanol addition on combustion characteristics such as combustion duration, ignition delay and emissions levels from diesel engines fuelled with blends of ethanol, diesel and JME is studied in particular. It is found that blending of oxygenated fuels with diesel modifies the chemical structure and physical properties which again alter the engine operating conditions, combustion parameters and emissions levels. However, the injection of only 5% ethanol through port injection allows for a total of 25% blending of biofuels into diesel yet keeping the fuel characteristics close to that of conventional diesel. However, both experimental and numerical results show that ethanol addition in JME blended diesel results in a slight increase in fuel consumption and thermal efficiency for the same power outputs as that of conventional diesel fuel. Also, the combustion characteristics with ethanol addition include improved maximum in-cylinder peak pressure, cumulative heat release (CHR) rate of heat release (ROHR), in-cylinder peak temperature and combustion duration. Regarding emission characteristics the experimental results show significant reduction in smoke, carbon monoxide (CO) and total hydrocarbon (THC) emissions with extended oxygen mass percentage in the fuel at higher engine loads. However, oxides of nitrogen (NOx) emissions are found to increase at high loads although the common tradeoff between smoke and NOx is found to be more prominent for the oxygenated fuels.

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

Abstract This paper aims to present a feasibility study of the innovative plant for methanol synthesis from carbon dioxide-sequestered by fossil fuel power plant and hydrogen, which is produced by water electrolyzer employing the over-production on the electrical grid. The thermo-economic analysis is performed in the framework of the MefCO2 H2020 EU project and it is referred to the German economic scenario, properly taking into account the real market costs and cost functions for different components of the plant. Three different plant capacities for methanol production (4000 10,000 and 50,000 ton/year) have been investigated, assuming an average cost for electrical energy to feed electrolysers and analyzing the influence of the most significant parameters (oxygen selling option, methanol selling price and electrolysers’ capital cost) on the profitability of the plant. The analysis has been performed in W-ECoMP, software for the thermo-economic analysis and plant optimization developed by the University of Genoa.

Abstract: The dynamics of reformation and replacement of gas hydrates were studied under nonequilibrium conditions. It was found that the reformation of gas hydrates is largely affected by the state of the gas‐water system and the restarting temperature. This suggests that the effects are caused by changes in the structure of the aqueous solution at a molecular level. Pure samples of CH4 gas hydrate were synthesized from ice crystals and the dissociated solution using the reformation method. Replacement of CO2 gas hydrate is achieved within a short duration in the solid‐phase sample of CH4 gas hydrate, if the pressure and temperature is precisely controlled in a pressure vessel.

Abstract The commonly used transmutation rate of minor actinides in nuclear reactors is decomposed into four components, overall fission rate, Pu production rate, MA production rate, and element production rate. The physical meanings of these factors are described. The transmutation rates of minor actinides in two types of highly-moderated PWRs, a MOX fueled Na cooled fast reactor, and a metal fueled Pb cooled fast reactor are interpreted using the four components. The metal fueled Pb cooled fast reactor can incinerate minor actinides most (79kg/GWth/year), and this amount is about 4 times larger than the thermal reactors. The thermal reactors have large relative overall fission rates for 241 Am and have a potential for the incineration of 241 Am.

Abstract The present work attempts to devise an efficient method utilizing an on-grid photovoltaic-thermal heat pump water heater (PV-THPWH) integrated with a real-time variable frequency controller to achieve the goal of energy-efficient buildings. The prime focus is to reduce the grid's dependence on the compressor's energy-intensive operation by employing a feedback-controlled variable frequency drive (VFD). Additionally, the possibilities involved with addressing the electrical and thermal energy requirements of an energy-efficient building was investigated utilizing the proposed system. R-32 refrigerant in the photovoltaic-thermal (PV-T) evaporator coils of the heat pump assembly help to cool the photovoltaic (PV) panel while delivering the absorbed heat in the condenser to heat water contained inside the storage tank. Outdoor experiments and theoretical investigations of the combined system were carried out to appraise the dynamic behavior under varying solar irradiation and ambient temperature conditions. The observations conveyed that the PV-THPWH system succeeded in reducing the PV panel operating temperature by 25%, which resulted in a 20% increment in PV power output. Also, the performance indicators, such as the instantaneous energy efficiency and instantaneous PV efficiency, were found to increase by 15% and 34%, respectively, resulting in an average coefficient of performance of 6.4. For a clear sky day, the recorded total PV energy output was 4.67 units, while the VFD compressor consumption was 3.42 units, and the surplus 1.25 units were sent to the grid. Furthermore, the economic analysis reported a payback period of 2.3 years for the developed PV-THPWH system.

Analytical and experimental studies of a brushless, exciterless, single-phase, sinusoidal-wave synchronous machine operating as a generator or a motor, derived from a three-phase machine, are reported. One phase armature winding of the three-phase machine is used as an auxiliary stator winding of the single-phase machine and is used to supply the exciting power for the other two-phase armature windings acting as the load winding of the single-phase machine. A 1.5 kW, 200 V, 60 Hz, four-pole synchronous machine was used the experiments. It is shown that the waveforms of the armature terminal voltage and the load current are nearly sinusoidal. The advantages of the single-phase machine as a portable generator or small-load motor are discussed. >

Abstract This study demonstrates the possibility to use energy-cost optimal building designs based on life cycle approach. There is a lack of studies that cover the comprehensive assessment of both embodied energy (EE) and operational energy (OE) in a single optimization problem. The primary goal of the current study is to compare the optimized results of using OE+EE together and OE only. The optimization is performed on a case study building (townhouse) in Finland with three structural alternatives (i.e., reinforced concrete (RC); cross-laminated timber (CLT) and Steel). Different options for insulation thickness of external wall, roof, floor and window types were considered as decision variables as the scope of the present study is on building envelope. The objectives of the optimization are to minimize life cycle energy (LCE) and life cycle costs (LCC). The LCE difference between the most and least energy efficient solution on the pareto front is greater in case of the OE optimization, compared to OE+EE optimization. For all studied structures, the EE of the optimal solutions from OE+EE optimization ranges 16%–23% of LCE. Many of the non-dominated optimal solutions obtained from the OE+EE optimization shows a higher U-value for the building envelope components compared to the optimal solutions from the OE optimization. A relationship between both OE and EE with the overall thermal resistance of the building envelope is discussed to obtain a deeper understanding of such differences in U-value for the optimal solutions obtained from the OE+EE and OE optimization.