• Energy Research
• CA close
• SE close
• Applied Energy close

Abstract For 118 million residential housing units in the U.S., there is currently a gap between the potential energy savings that can be achieved through the use of existing energy efficiency technologies, and the actual level of energy savings realized, particularly for the 37% of housing units that are considered residential rental properties. Additional quantifiable benefits are needed beyond energy savings to help further motivate residential property owners to invest in energy efficiency upgrades. This research focuses on assessing the adoption of energy efficient upgrades in U.S. residential housing and the impact on rental prices. Ten U.S. cities are chosen for analysis; these cities vary in size across multiple climate zones, and represent a diverse set of housing market conditions. Data was collected for over 159,000 rental property listings, their characteristics, and their energy efficiency measures listed in rental housing postings across each city. Following an extensive data quality control process, over thirty different types energy efficient features were identified. The level of adoption was determined for each city, ranging from 5.3% to 21.6%. Efficient lighting and appliances were among the most common, with many features doubling as energy efficient and other desirable aesthetic or comfort improvements. Then using propensity score matching and conditional mean comparison methods, the relative impact on rent charged in each city was calculated, which ranged from a 6% to 14.1% increase in rent for properties with energy efficient features, demonstrating a positive economic impact of these features, particularly for property owners. This was further subdivided into five types of energy efficiency upgrade and three housing types. Single family homes generally demanded higher premiums with energy efficient features, however there was not a consistent pattern across the types of efficient upgrades. The results of this work demonstrate that investment in energy efficient technologies has quantifiable benefits for rental property owners in the U.S. beyond just energy savings. This methodology and results can also be used in other cities and by property owners, utility companies, or others, ultimately encouraging further investment and positive economic impact in residential energy efficiency and in turn improving energy and resource conservation in the building sector.

Abstract For 118 million residential housing units in the U.S., there is currently a gap between the potential energy savings that can be achieved through the use of existing energy efficiency technologies, and the actual level of energy savings realized, particularly for the 37% of housing units that are considered residential rental properties. Additional quantifiable benefits are needed beyond energy savings to help further motivate residential property owners to invest in energy efficiency upgrades. This research focuses on assessing the adoption of energy efficient upgrades in U.S. residential housing and the impact on rental prices. Ten U.S. cities are chosen for analysis; these cities vary in size across multiple climate zones, and represent a diverse set of housing market conditions. Data was collected for over 159,000 rental property listings, their characteristics, and their energy efficiency measures listed in rental housing postings across each city. Following an extensive data quality control process, over thirty different types energy efficient features were identified. The level of adoption was determined for each city, ranging from 5.3% to 21.6%. Efficient lighting and appliances were among the most common, with many features doubling as energy efficient and other desirable aesthetic or comfort improvements. Then using propensity score matching and conditional mean comparison methods, the relative impact on rent charged in each city was calculated, which ranged from a 6% to 14.1% increase in rent for properties with energy efficient features, demonstrating a positive economic impact of these features, particularly for property owners. This was further subdivided into five types of energy efficiency upgrade and three housing types. Single family homes generally demanded higher premiums with energy efficient features, however there was not a consistent pattern across the types of efficient upgrades. The results of this work demonstrate that investment in energy efficient technologies has quantifiable benefits for rental property owners in the U.S. beyond just energy savings. This methodology and results can also be used in other cities and by property owners, utility companies, or others, ultimately encouraging further investment and positive economic impact in residential energy efficiency and in turn improving energy and resource conservation in the building sector.

Abstract A resilient strategy for optimal demand response control based on the management of highly-distributed electric loads is presented to meet transmission-level control aimed at maintaining voltage stability. The proposed load control scheme balances device- and grid-level objectives simultaneously, and is demonstrated for a system comprising a distributed responsive population of 14,000 residential-sized buildings integrated in a transmission system network consisting of six buses. Air-source heat pumps are implemented as the primary heating source in the responsive building population, and are introduced as a dispatchable grid-side energy resource, where aggregated output can be objectively ramped up or down through the use of an optimal centralized control strategy. A two step multi-objective optimization procedure is implemented to simultaneously satisfy balancing of the power system and customer objectives across a multi-scalar system. At the power system-level, the optimal preventive control scheme is obtained based on steady-state voltage stability constraints. At the customer-level, an optimal demand response strategy is proposed, wherein the aggregate power demand from a population of heat pumps is controlled to follow load-shedding requirements. The customer comfort is continuously maintained by constrained regulation of the thermal set-point governing operation of the heat pump device. The proposed demand-side strategy achieves similar goals to conventional approaches to regulation and spinning reserve ancillary services, but with the significant benefit of higher efficiencies. Under the proposed scheme, ancillary services provided by the electric loads effectively become virtual generators that enhance the voltage stability in power systems operating under increased uncertainty, and replace severe or multiple contingency reserves typically supplied by conventional generators. The proposed demand response control scheme can be extended to other potentially responsive end-use appliances, and opens avenues for increased exploitation of intermittent renewable energy resources while reducing operating costs and emissions.

Abstract A resilient strategy for optimal demand response control based on the management of highly-distributed electric loads is presented to meet transmission-level control aimed at maintaining voltage stability. The proposed load control scheme balances device- and grid-level objectives simultaneously, and is demonstrated for a system comprising a distributed responsive population of 14,000 residential-sized buildings integrated in a transmission system network consisting of six buses. Air-source heat pumps are implemented as the primary heating source in the responsive building population, and are introduced as a dispatchable grid-side energy resource, where aggregated output can be objectively ramped up or down through the use of an optimal centralized control strategy. A two step multi-objective optimization procedure is implemented to simultaneously satisfy balancing of the power system and customer objectives across a multi-scalar system. At the power system-level, the optimal preventive control scheme is obtained based on steady-state voltage stability constraints. At the customer-level, an optimal demand response strategy is proposed, wherein the aggregate power demand from a population of heat pumps is controlled to follow load-shedding requirements. The customer comfort is continuously maintained by constrained regulation of the thermal set-point governing operation of the heat pump device. The proposed demand-side strategy achieves similar goals to conventional approaches to regulation and spinning reserve ancillary services, but with the significant benefit of higher efficiencies. Under the proposed scheme, ancillary services provided by the electric loads effectively become virtual generators that enhance the voltage stability in power systems operating under increased uncertainty, and replace severe or multiple contingency reserves typically supplied by conventional generators. The proposed demand response control scheme can be extended to other potentially responsive end-use appliances, and opens avenues for increased exploitation of intermittent renewable energy resources while reducing operating costs and emissions.

Installing photovoltaic (PV) modules on highways is considered a promising way to support carbon neutrality in China. However, collecting the area of the highway, and precisely assessing the shadow area of the highway under complex terrain remain challenges. That severely hinders the assessment of highway PV potential. To address these challenges, a spatiotemporal model is developed in this study to estimate the annual solar PV potential on highways over the whole Chinese territory. First, the areas of different highway segments are calculated based on highway network and highway toll stations. Second, hourly shadow area on highways created by nearby terrain is estimated based on a digital elevation model (DEM). When calculating the highway PV potential, the solar irradiation received in these shadow areas is regarded as zero. Finally, the PV potential of all lanes and emergency lanes was estimated at the prefecture-level city scale using surface radiation data and radiation assessment models. Based on the highway data with a total mileage of 143,684 km at the end of 2020, the results show that the annual PV potential is 3,932 TW and that the corresponding installed capacity is 700.85 GW, which can generate clean electricity at a rate of up to 629.06 TWh. The annual PV potential of highways in the southeast is greater than that in the northwest owing to the higher highway density in the southeast. This study provides a reference basis for highway PV construction planning and suitably assessment in each region of China for PV highway development. © 2022 Elsevier Ltd

Installing photovoltaic (PV) modules on highways is considered a promising way to support carbon neutrality in China. However, collecting the area of the highway, and precisely assessing the shadow area of the highway under complex terrain remain challenges. That severely hinders the assessment of highway PV potential. To address these challenges, a spatiotemporal model is developed in this study to estimate the annual solar PV potential on highways over the whole Chinese territory. First, the areas of different highway segments are calculated based on highway network and highway toll stations. Second, hourly shadow area on highways created by nearby terrain is estimated based on a digital elevation model (DEM). When calculating the highway PV potential, the solar irradiation received in these shadow areas is regarded as zero. Finally, the PV potential of all lanes and emergency lanes was estimated at the prefecture-level city scale using surface radiation data and radiation assessment models. Based on the highway data with a total mileage of 143,684 km at the end of 2020, the results show that the annual PV potential is 3,932 TW and that the corresponding installed capacity is 700.85 GW, which can generate clean electricity at a rate of up to 629.06 TWh. The annual PV potential of highways in the southeast is greater than that in the northwest owing to the higher highway density in the southeast. This study provides a reference basis for highway PV construction planning and suitably assessment in each region of China for PV highway development. © 2022 Elsevier Ltd

Abstract In this study, batch tests were performed to evaluate the effects of different thermal pretreatment temperatures (55–160 °C) and durations (15–120 min) on the anaerobic digestion of kitchen waste (KW). Two commonly used approaches, namely the modified Gompertz model and the approach developed by Koch and Drewes, were applied to assess the effects of the different pretreatment parameters on the biomethane yield, lag time and hydrolysis rate constant via data fitting. The subsequent anaerobic digestion of KW pretreated at 55–120 °C presented greater efficiency, and longer treatment durations resulted in increased methane production and higher hydrolysis rate constants. These findings were obtained due to the lower nutrient loss observed in KW treated at lower temperature treatments compared with that found with higher temperature treatments. In general, the effects of thermal pretreatment on the lag phase and hydrolysis rate differed depending on the treatment parameters leading to the variations in the KW compositions. The soundness of the two model results was evaluated, and higher statistical indicators (R2) were found with the modified Gompertz model than with the approach developed by Koch and Drewes.

Abstract In this study, batch tests were performed to evaluate the effects of different thermal pretreatment temperatures (55–160 °C) and durations (15–120 min) on the anaerobic digestion of kitchen waste (KW). Two commonly used approaches, namely the modified Gompertz model and the approach developed by Koch and Drewes, were applied to assess the effects of the different pretreatment parameters on the biomethane yield, lag time and hydrolysis rate constant via data fitting. The subsequent anaerobic digestion of KW pretreated at 55–120 °C presented greater efficiency, and longer treatment durations resulted in increased methane production and higher hydrolysis rate constants. These findings were obtained due to the lower nutrient loss observed in KW treated at lower temperature treatments compared with that found with higher temperature treatments. In general, the effects of thermal pretreatment on the lag phase and hydrolysis rate differed depending on the treatment parameters leading to the variations in the KW compositions. The soundness of the two model results was evaluated, and higher statistical indicators (R2) were found with the modified Gompertz model than with the approach developed by Koch and Drewes.

Abstract Attention is devoted to the application of cylindrical-parabolic solar concentrators in the intermediate temperature range for which wide receivers are used. Suitable indices that describe the performance of the concentrator are defined and evaluated. The effect of each individual parameter on total concentrator performance is investigated. The results of the analysis are presented as a set of graphs which can be used easily when designing parabolic concentrators.