• Energy Research
• nano-technology close
• CN close
• DK close

Abstract The aim of this study was to explore the utilization of Pennisetum sinese as cellulose source for the preparation of cellulose nanocrystals (CNC). The cellulose was extracted from P. sinese by chemical treatment and bleaching, and obtained cellulose nanocrystals by acid hydrolysis. Transmission electron microscopy (TEM) showed that CNC were rod-like with the diameter of 20–30 nm and the length of 200–300 nm. Fourier transform infrared (FTIR) showed that chemical treatment removed most of the lignin and hemicellulose from P. sinese , and CNC had similar structure to that of native cellulose. The crystallinity indexes calculated from X-ray diffraction (XRD) for P. sinese and CNC were 40.6% and 77.3%, respectively. The zeta-potential analysis showed that CNC had higher stability than P. sinese had. The thermal stability was investigated by thermogravimetric analysis (TGA), and the result showed that P. sinese had higher thermal stability than that of prepared CNC.

Abstract The aim of this study was to explore the utilization of Pennisetum sinese as cellulose source for the preparation of cellulose nanocrystals (CNC). The cellulose was extracted from P. sinese by chemical treatment and bleaching, and obtained cellulose nanocrystals by acid hydrolysis. Transmission electron microscopy (TEM) showed that CNC were rod-like with the diameter of 20–30 nm and the length of 200–300 nm. Fourier transform infrared (FTIR) showed that chemical treatment removed most of the lignin and hemicellulose from P. sinese , and CNC had similar structure to that of native cellulose. The crystallinity indexes calculated from X-ray diffraction (XRD) for P. sinese and CNC were 40.6% and 77.3%, respectively. The zeta-potential analysis showed that CNC had higher stability than P. sinese had. The thermal stability was investigated by thermogravimetric analysis (TGA), and the result showed that P. sinese had higher thermal stability than that of prepared CNC.

AbstractSolubilities of CO2, CH4, H2, CO and N2 in choline chloride/urea (ChCl/Urea) were investigated at temperatures ranging from 308.2 to 328.2 K and pressures ranging from 0.6 to 4.6 MPa. The results show that the solubilities of gases increase with increasing pressure and decreasing temperature. The solubility of CO2 is higher than that of CH4, H2, CO and N2, which indicates that ChCl/Urea may be used as a potential solvent for CO2 capture from the gas mixture. Solubility of CO2 in ChCl/Urea was fitted by Non-Random Two-Liquid and Redlich–Kwong (NRTL-RK) model, and solubility of CH4, H2, CO or N2 in ChCl/Urea was fitted by Henry's Law. The standard enthalpy, standard Gibbs energy and standard entropy of gases were calculated. Additionally, the CO2/CH4 selectivities in water, dry ChCl/Urea and aqueous ChCl/Urea were further discussed.

AbstractSolubilities of CO2, CH4, H2, CO and N2 in choline chloride/urea (ChCl/Urea) were investigated at temperatures ranging from 308.2 to 328.2 K and pressures ranging from 0.6 to 4.6 MPa. The results show that the solubilities of gases increase with increasing pressure and decreasing temperature. The solubility of CO2 is higher than that of CH4, H2, CO and N2, which indicates that ChCl/Urea may be used as a potential solvent for CO2 capture from the gas mixture. Solubility of CO2 in ChCl/Urea was fitted by Non-Random Two-Liquid and Redlich–Kwong (NRTL-RK) model, and solubility of CH4, H2, CO or N2 in ChCl/Urea was fitted by Henry's Law. The standard enthalpy, standard Gibbs energy and standard entropy of gases were calculated. Additionally, the CO2/CH4 selectivities in water, dry ChCl/Urea and aqueous ChCl/Urea were further discussed.

The inferior cycle lifespan and unsatisfactory energy density of traditional anode materials for sodium-ion batteries need to be improved toward actual application. Here, MOF-derived ultrafine ZnSe...

The inferior cycle lifespan and unsatisfactory energy density of traditional anode materials for sodium-ion batteries need to be improved toward actual application. Here, MOF-derived ultrafine ZnSe...

AbstractAlloy anodes composed of microsized particles receive increasing attention recently, which outperform the nanostructured counterparts in both the manufacturing cost and volumetric energy density. However, the pulverization of particles and fracture of solid electrolyte interphase (SEI) during cycling brings about fast capacity degradation. Herein, it is shown how normally considered fragile SEI can become highly elastic through electrolyte chemistry regulation. Compared to the SEI constructed in classic carbonate electrolyte, the atomic force microscopy tests reveal that the one built in ether‐based electrolyte doubles the maximum elastic strain to accommodate the repeated swelling‐contracting. Such an SEI effectively encapsulates the microsized Sb anodes to prevent the capacity loss from particle isolation. Coupled with an intercalation‐assisted alloying reaction mechanism, a sustained capacity of ≈573 mAh g−1 after 180 cycles at 0.1 A g−1 with outstanding initial Coulombic efficiency is obtained, which is among the highest values achieved in K‐ion batteries. This study emphasizes the significance of building robust SEI, which offers the opportunity to enable stable microsized alloy anodes.

AbstractAlloy anodes composed of microsized particles receive increasing attention recently, which outperform the nanostructured counterparts in both the manufacturing cost and volumetric energy density. However, the pulverization of particles and fracture of solid electrolyte interphase (SEI) during cycling brings about fast capacity degradation. Herein, it is shown how normally considered fragile SEI can become highly elastic through electrolyte chemistry regulation. Compared to the SEI constructed in classic carbonate electrolyte, the atomic force microscopy tests reveal that the one built in ether‐based electrolyte doubles the maximum elastic strain to accommodate the repeated swelling‐contracting. Such an SEI effectively encapsulates the microsized Sb anodes to prevent the capacity loss from particle isolation. Coupled with an intercalation‐assisted alloying reaction mechanism, a sustained capacity of ≈573 mAh g−1 after 180 cycles at 0.1 A g−1 with outstanding initial Coulombic efficiency is obtained, which is among the highest values achieved in K‐ion batteries. This study emphasizes the significance of building robust SEI, which offers the opportunity to enable stable microsized alloy anodes.