• Energy Research
• 7. Clean energy close
• 8. Economic growth close
• CN close
• KR close
• University of North Texas close

A head-end processing step, termed DEOX for its emphasis on decladding via oxidation, is being developed for the treatment of spent oxide fuel by pyroprocessing techniques. The head-end step employs high temperatures to oxidize UO2 to U3O8 resulting in the separation of fuel from cladding and the removal of volatile fission products. Development of the head-end step is being performed in collaboration with the Korean Atomic Energy Research Institute (KAERI) through an International Nuclear Energy Research Initiative. Following the initial experimentation for the removal of volatile fission products, an off-gas treatment system was designed in conjunction with KAERI to collect specific fission gases. The primary volatile species targeted for trapping were iodine, technetium, and cesium. Each species is intended to be collected in distinct zones of the off-gas system and within those zones, on individual filters. Separation of the volatile off-gases is achieved thermally as well as chemically given the composition of the filter media. A description of the filter media and a basis for its selection will be given along with the collection mechanisms and design considerations. In addition, results from testing with the off-gas treatment system will be presented.

Abstract Ammonia oxidation experiments were conducted at high pressure (30 bar and 100 bar) under oxidizing and stoichiometric conditions, respectively, and temperatures ranging from 450 to 925 K. The oxidation of ammonia was slow under stoichiometric conditions in the temperature range investigated. Under oxidizing conditions the onset temperature for reaction was 850–875 K at 30 bar, while at 100 bar it was about 800 K, with complete consumption of NH3 at 875 K. The products of reaction were N2 and N2O, while NO and NO2 concentrations were below the detection limit even under oxidizing conditions. The data were interpreted in terms of a detailed chemical kinetic model. The rate constant for the reaction of the important intermediate H2NO with O2 was determined from ab initio calculations to be 2.3 × 102 T2.994 exp(−9510 K/T) cm3 mol−1 s−1. The agreement between experimental results and model work was satisfactory. The main oxidation path for NH3 at high pressure under oxidizing conditions is NH3 ⟶ + OH NH2 ⟶ + HO 2 , NO 2 H2NO ⟶ + O 2 HNO ⟶ + O 2 NO ⟶ + NH 2 N2. The modeling predictions are most sensitive to the reactions NH2 + NO = NNH + OH and NH2 + HO2 = H2NO + OH, which promote the ammonia consumption by forming OH radicals, and to NH2 + NO = N2 + H2O and NH2 + NO2 = N2O + H2O, which are the main chain-terminating steps.

Graphene has been used as an electrically tunable material for switchable devices. A large area fabrication of Al-doped ZnO/Al2O3/graphene/Al2O3/gold/silicon device was enabled by a spin-processible hydrophilic mono-layer graphene oxide. The graphene was obtained directly from graphene oxide during the atomic layer deposition without other extra steps. A significant shift of Raman frequency up to 360 cm−1 was observed from graphene in the fabricated device, indicating a structural change in graphene. The absorption from the device was tunable with a negative voltage applied on the Al-doped ZnO side. The generated absorption change was sustainable when the voltage was off and erasable when a positive voltage was applied. The sustainability of tuned optical property in the graphene under investigation can lead to a design of device with less power consumption and many other applications.

AbstractA molecular dyad and triad, comprised of a known photosensitizer, BF2‐chelated dipyrromethane (BDP), covalently linked to its structural analog and near‐IR emitting sensitizer, BF2‐chelated tetraarylazadipyrromethane (ADP), have been newly synthesized and the photoinduced energy and electron transfer were examined by femtosecond and nanosecond laser flash photolysis. The structural integrity of the newly synthesized compounds has been established by spectroscopic, electrochemical, and computational methods. The DFT calculations revealed a molecular‐clip‐type structure for the triad, in which the BDP and ADP entities are separated by about 14 Å with a dihedral angle between the fluorophores of around 70°. Differential pulse voltammetry studies have revealed the redox states, allowing estimation of the energies of the charge‐separated states. Such calculations revealed a charge separation from the singlet excited BDP (1BDP*) to ADP (BDP.+‐ADP.−) to be energetically favorable in nonpolar toluene and in polar benzonitrile. In addition, the excitation transfer from the singlet BDP to ADP is also envisioned due to good spectral overlap of the BDP emission and ADP absorption spectra. Femtosecond laser flash photolysis studies provided concrete evidence for the occurrence of energy transfer from 1BDP* to ADP (in benzonitrile and toluene) and electron transfer from BDP to 1ADP* (in benzonitrile, but not in toluene). The kinetic study of energy transfer was measured by monitoring the rise of the ADP emission and revealed fast energy transfer (ca. 1011 s−1) in these molecular systems. The kinetics of electron transfer via 1ADP*, measured by monitoring the decay of the singlet ADP at λ=820 nm, revealed a relatively fast charge‐separation process from BDP to 1ADP*. These findings suggest the potential of the examined ADP–BDP molecules to be efficient photosynthetic antenna and reaction center models.

China's economic boom in the last three decades has spurred increasing demand for transportation services and personal mobility. Consequently, vehicle population has grown rapidly since the early 1990s, especially in megacities such as Beijing, Guangzhou, and Tianjin. As a result, mobile sources have become more conspicuous contributors to urban air pollution in Chinese cities. Tianjin was our first focus city, and the study there took us about two years to complete. Building upon the experience and partnership generated through the Tianjin study, the research team carried out the Beijing study from fall 2007–fall 2008. Beijing was chosen to be our second focus city for several reasons: it has the largest local fleet and the highest percentage of the population owning vehicles among all Chinese cities, and it has suffered from severe air pollution, partially due to the ever-growing population of on-road vehicles.

This final report describes results achieved under a 20-month NREL subcontract to develop and understand thin-film solar cell technology associated to CuInSe{sub 2} and related alloys, a-Si and its alloys, and CdTe. Modules based on all these thin films are promising candidates to meet DOE's long-range efficiency, reliability and manufacturing cost goals. The critical issues being addressed under this program are intended to provide the science and engineering basis for the development of viable commercial processes and to improve module performance. The generic research issues addressed are: (1) quantitative analysis of processing steps to provide information for efficient commercial-scale equipment design and operation; (2) device characterization relating the device performance to materials properties and process conditions; (3) development of alloy materials with different bandgaps to allow improved device structures for stability and compatibility with module design; (4) development and improved window/heterojunction layers and contacts to improve device performance and reliability; and (5) evaluation of cell stability with respect to device structure and module encapsulation.

Abstract The issues of fossil-fired energy shortage and global warming have aroused worldwide attention, and the renewable and sustainable energy sources, therefore, are playing an increasingly important role in future energy consumptions. Energy consumptions in buildings account for almost 40% of the primary energy use in the US. A novel research-based Z er o E nergy (ZOE) Lab as a validation testbed combining various kinds of renewable energies has been presented in this paper. The concept, unique features, and the operation performance by experiments have also been shown in detail. The results of the novel ZOE Lab can open up a good angle for the future development of zero energy buildings. After analyzing the operating data of the ZOE Lab, the energy consumption, energy generation, and energy allocation of the devices have been presented. A new HVAC system with higher performance is recommended to be used in the ZOE Lab to achieve an even lower energy consumption than the current use, as a necessary refinement.

AbstractWe describe applications of PV Optics to analyze the behavior of a metallic back-reflector on an a-Si solar cell. The calculated results from PV Optics agree well with the measured data on solar cells. Several unexpected results obtained from these calculations are qualitatively explained.