• Energy Research
• Closed Access close
• Open Source close
• Embargo close
• 7. Clean energy close
• 13. Climate action close
• CN close

Abstract Compared with other traditional energy sources, renewable energy, which results the less pollution and has numerous resources, is a significant factor in addressing the current issues of the serious environmental pollution and the resource depletion. Large-scale renewable energy integrated to the grid could bring change in both morphological structure and operation modes of energy transmission. Therefore, it is necessary to research the evolution mechanism of the future transmission network with a high proportion of the renewable energy. In this paper, an evolution framework of power system with high proportion of renewable energy is proposed. Firstly, a network equivalence and simplification based on power transfer distribution factors (PTDFs) is proposed, which can effectively simplify the decision-making process of evolution of large-scale power system. Then, an annual production simulation (8760 h) which takes into account renewable energy and load fluctuations is used to find out the bottleneck of the power grid. Based on the above methods, evolution strategy of power system with high proportion of renewable energy is studied for finding out optimal expansion strategy. A real power system of Zhejiang province is used as a test system. Test results demonstrate the feasibility of the proposed evolution framework.

Cold-start (subzero startup) capability of polymer electrolyte fuel cell (PEFC) is of great importance. In this paper, the effects of the micro-porous-layer (MPL), varying start-up temperatures, start-up current density variation on the cold-start operation are investigated. We found PEFC with anode micro-porous-layer (AMPL), compared with one with CMPL, has higher possibility of successful cold start. By analyzing the anode and cathode pressure revolution of PEFC, the effect of MPL on the super cooled water removal and ice formation at different temperatures (-7,-10,-15 and-20℃) are discussed . In addition, we investigate the ice distribution in MEA through the X-ray device, by comparing the initial image when fuel cells shut down (before the produce the water) and final image after failed cold-start. We also explore the negative voltage phenomenon in the initial process of cold-start operation.

Abstract To alleviate the shortage of natural gas resource and ease carbon emissions, a novel solar-driven combined cooling, heating and power (CCHP) system is designed and optimized using the genetic algorithm in the work. Different from the process of direct combustion in a conventional CCHP system, natural gas is firstly converted into syngas by a solar-driven natural gas reforming step, which is consumed in an efficient tri-generation system. Energy, economic and environmental evaluations on five office buildings in different climate zones in China are implemented to validate the advantages of the proposed system. Results show that the annual maximum primary energy saving, total cost saving, and CO2 emission reduction are 69.76%, 49.80%, and 71.55%, respectively. The system located in severe cold zones, where solar energy is abundant and building requires more heat load in whole year, achieves the highest benefits in comparison with separate systems. Furthermore, the sensitivities on the price fluctuations of electricity, natural gas and solar field to the system profits are investigated, which indicates that the influence of electricity price on the system performance is the most significant. Thus, a promising method for reducing the natural gas consumption and improving the utilization efficiency of solar energy is provided.

Abstract To further improve the cycle efficiency with the heat transfer curves between higher than 350 °C heat resource and the evaporating working medium of the Kalina cycle and to reduce the exhaust temperature of heat resource, the dual-pressure vaporization Kalina cycle for cascade utilization of high-to-mid grade heat resource is proposed. The optimization was conducted for parameters in this modified Kalina cycle such as concentrations of work solution and basic solution, evaporation dew point temperature. Under the conditions of inlet temperatures of heat resource and cooling water of respectively 400 °C and 25 °C and the constraints of proper heat transfer pinch point temperature differences, the maximum evaporation pressure not exceeds 20 MPa, the vapour quality at the turbine outlet is greater than 0.85 and the exhaust temperature of heat resource is not lower than 90 °C, the optimum parameters are obtained that the work and basic concentrations are 0.45 and 0.272 respectively, the dew point temperature of evaporation is 300 °C, and the corresponding power recovery efficiency of the dual-pressure vaporization Kalina cycle reaches 27%, which is 17% higher than that of the Kalina cycle with optimum parameters.

A controllable planar Fe2O3/WO3 photoanode with an integrated Co(OH)x layer was prepared via an electrospray technique for enhanced PEC performance.

A new type of photovoltaic system with higher generation power density has been studied in detail. The feature of the system is a V-shaped module (VSM) with two tilted monocrystalline solar cells. Compared to solar cells in a flat orientation, the VSM enhances external quantum efficiency and leads to an increase of 31% in power conversion efficiency. Due to the VSM technique, short-circuit current density was raised from 24.94 to 33.7mA/cm(2), but both fill factor and open-circuit voltage were approximately unchanged. For the VSM similar results (about 30% increase) were obtained for solar cells fabricated by using mono-crystal line silicon wafers with only conventional background impurities. (c) 2004 Elsevier B.V. All rights reserved.

Abstract The Liquefied natural gas (LNG) cryogenic submerged pump, the core power equipment for the transportation of liquefied natural gas, is prone to cavitation. However, based on the traditional analysis of the pressure drop, the irreversible loss after cavitation can barely be displayed quantitatively. To solve this problem, an entropy production diagnostic model (EPDM) by the contribution of viscous entropy production (VEP), turbulent entropy production (TEP) and wall entropy production (WEP) for the cavitation flow was established to calculate the energy loss. The cryogenic cavitation model and proposed EPDM were proved to be reliable after comparing results with Hord’s experiment in an ogive and cavitation experiment in a centrifugal pump. Then, by studying the total entropy production, it was found that the EPDM could well predict the occurrence of the critical cavitation and the deterioration of cavitation. When compared with TEP and WEP, the effect of VEP is negligible. As the cavitation area expands from the suction surface of inducer (id) to the first-stage impeller (impA), the cavitation process can be divided into three stages and the total energy loss increases significantly from the first stage to the third one. Through the global distribution of energy loss, it was found that the faster growth of the loss in the second-stage impeller (impB) and the second-stage guide vane (gvB), not in id and impA, contributes more to the energy loss after cavitation. Finally, from the variation of ratio of TEP to WEP, it reveals that cavitation has a greater effect on the WEP rate for the impB, but the turbulent viscous dissipation is still dominant, while the eddy dissipation and resistance loss in gvB with the evolution of cavitation are both crucial.

The effect of azeotropism on combustion characteristics of blended fuel pool fire was experimentally studied in an open fire test space of State Key Laboratory of Fire Science. A 30 cm × 30 cm square pool filled with n-heptane and ethanol blended fuel was employed. Flame images, burning rate and temperature distribution were collected and recorded in the whole combustion process. Results show that azeotropism obviously dominates the combustion behavior of n-heptane/ethanol blended fuel pool fire. The combustion process after ignition exhibits four typical stages: initial development, azeotropic burning, single-component burning and decay stage. Azeotropism appears when temperature of fuel surface reaches azeotropic point and blended fuel burns at azeotropic ratio. Compared with individual pure fuel, the effect of azeotropism on main fire parameters, such as flame height, burning rate, flame puffing frequency and centerline temperature were analyzed. Burning rate and centerline temperature of blended fuel are higher than that of individual pure fuel respectively at azeotropic burning stage, and flame puffing frequency follows the empirical formula between Strouhal and Froude number for pure fuel.

In order to improve the energy efficiency of the multi-energy system, this paper uses the coupling model of combined heating and power and electrical heat pump to realize the large-scale regulation of the electric-thermal ratio. The high efficiency of the electric heat pump improves the heating efficiency of the system, and uses the heat storage device to adjust the peak-valley difference of load. Firstly, the coupling model of cogeneration and heat pump is established. Then, the new concept of "critical electricity price" is proposed and its control strategy is elaborated. Then, the energy supply equipment and load side of the system are modeled. Considering the supply-demand balance and operation constraints, an optimal scheduling model with the lowest energy price and the highest energy efficiency of the system as a comprehensive index is constructed. Finally, the model is solved by CPLEX software with YALMIP toolbox. The example analysis proves that the optimal scheduling strategy proposed in this paper can improve the economy and flexibility of the system.