• Energy Research
• 2016-2025close
• Restricted close
• Open Source close
• Embargo close
• DE close

Thermoacoustic technology emerges as a sustainable and low-carbon method for energy conversion, leveraging environmentally friendly working mediums and independence from electricity. This study presents the development of a multimode heat-driven thermoacoustic system designed to utilize medium/low-grade heat sources for room-temperature cooling and heating. We constructed both a simulation model and an experimental prototype for a single-unit direct-coupled thermoacoustic system, exploring its performance in heating-only, cooling-only, and hybrid heating and cooling modes. Internal characteristic analysis including an examination of internal exergy loss and a distribution analysis of key parameters was first conducted in the hybrid cooling and heating mode. The results indicated a positive-focused traveling-wave-dominant acoustic field within the thermoacoustic core unit, enhancing energy conversion efficiency. The output system performance was subsequently tested under different working conditions in the heating-only and cooling-only modes. A maximum output heating power of 2.3 kW and a maximum COPh of 1.41 were observed in the heating-only mode. Meanwhile, a cooling power of 748 W and a COPc of 0.4 were obtained in the typical cooling condition at 7 °C when operating in cooling-only mode. These findings underscore the promising potential of thermoacoustic systems for efficiently utilizing medium/low-grade heat sources for cooling and/or heating applications in the future.

In this paper, we address the problem of determining the optimal day-ahead generation profile for a wind power producer by exploiting wind speed forecasts provided by a meteorological service. In the considered framework, the wind power producer is called to take part in the responsibility of system operation by providing day-ahead generation profiles and undergoing penalties in case of deviations from the schedule. Penalties are applied only if the delivered hourly energy deviates from the schedule more than a given relative tolerance. The optimal solution is obtained analytically by formulating and solving a stochastic optimization problem aiming at maximizing the expected profit. The proposed approach consists in exploiting wind speed forecasts to classify the next day into one of several predetermined classes, and then selecting the optimal solution derived for each class. The performance of the bidding strategy is demonstrated using real data from an Italian wind plant and weather forecasts provided by a commercial meteorological service.

AbstractAlthough canopy height has long been a focus of interest in ecology, it has remained difficult to study at large spatial scales. Recently, satellite‐borne LiDAR equipment produced the first systematic high resolution maps of vegetation height worldwide. Here we show that this new resource reveals three marked modes in tropical canopy height ~40, ~12, and ~2 m corresponding to forest, savanna, and treeless landscapes. The distribution of these modes is consistent with the often hypothesized forest‐savanna bistability and suggests that both states can be stable in areas with a mean annual precipitation between ~1,500 and ~2,000 mm. Although the canopy height states correspond largely to the much discussed tree cover states, there are differences, too. For instance, there are places with savanna‐like sparse tree cover that have a forest‐like high canopy, suggesting that rather than true savanna, those are thinned relicts of forest. This illustrates how complementary sets of remotely sensed indicators may provide increasingly sophisticated ways to study ecological phenomena at a global scale.

AbstractClimate change and land‐use change are two major drivers of biome shifts causing habitat and biodiversity loss. What is missing is a continental‐scale future projection of the estimated relative impacts of both drivers on biome shifts over the course of this century. Here, we provide such a projection for the biodiverse region of Latin America under four socio‐economic development scenarios. We find that across all scenarios 5–6% of the total area will undergo biome shifts that can be attributed to climate change until 2099. The relative impact of climate change on biome shifts may overtake land‐use change even under an optimistic climate scenario, if land‐use expansion is halted by the mid‐century. We suggest that constraining land‐use change and preserving the remaining natural vegetation early during this century creates opportunities to mitigate climate‐change impacts during the second half of this century. Our results may guide the evaluation of socio‐economic scenarios in terms of their potential for biome conservation under global change.

Abstract This study presents an evaluation of the error induced by neglecting the effect of air compressibility in modelling Oscillating Water Column (OWC) wave energy converters. A compressible two phases CFD model in the open-source software package OpenFOAM® is validated and then used to simulate a fixed OWC device, detached from the sea bottom. A comparative analysis of the results obtained by simulating the device at full-scale (1:1) and at four smaller scales (1:50, 1:25, 1:10 and 1:5) is performed in order to assess the scale effects associated with air compressibility. Indeed, for the air pressure levels considered in the simulations (up to 350 Pa at model scale 1:50), the effect of neglecting the air compressibility results in an overestimation up to about 15% for the air pressure in the OWC chamber and the subsequent air volume flux, but less than 10% for the capture width ratio. This overestimation increases with increasing pressure level. Results are analysed in terms of dimensionless parameters and a new parameter, strongly related to the compressible effects, is proposed and used to provide generalized equations delivering correction factors.

China joined the ICOM in 1983. Joining such an international community of museological experts and scholars implied sharing the standards and founding principles, however if we consider the development and the status quo of the art museum system in China, it is possible to point out some contradictions and peculiarities. Since the early 1980s, following a renovation process of the entirety of Chinese national institutions, the museum system has been enjoying an unprecedented development. As well, a more general discourse on the cultural heritage of the country has increasingly gained a prominent position in the cultural policy agenda. As far as art museums are concerned, since the end of the 1990s, the country has been experiencing a rapid and unprecedented development as well, encompassing both the state-owned and private sector. However, today the proliferation of art museums appears to be more driven by the compulsion for a status symbol rather than pursuing a cultural mission. Therefore, a key question arises concerning the quality of these art institutions, their effective role in the promotion of art, and their cultural impact. This study aims to enrich the debate on museums of contemporary art, and intends to offer a parameter of sustainability in order to evaluate the Chinese art museum system.

The determination of minimum free energy pathways (MFEP) is one of the most widely used strategies to study reactive processes. For chemical reactions in complex environments, the combination of quantum mechanics (QM) with a molecular mechanics (MM) representation is usually necessary in a hybrid QM/MM framework. However, even within the QM/MM approximation, the affordable sampling of the phase space is, in general, quite restricted. To reduce drastically the computational cost of the simulations, several methods such as umbrella sampling require performing a priori a selection of a reaction coordinate. The quality of the computed results, in an affordable computational time, is intimately related to the reaction coordinate election which is, in general, a nontrivial task. In this work, we provide an approach to model reactive processes in complex environments that does not require the a priori selection of a reaction coordinate. The proposed methodology combines QM/MM simulations with an extrapolation of the nudged elastic bands (NEB) method to the free energy surface (FENEB). We present and apply our own FENEB scheme to optimize MFEP in different reactive processes, using QM/MM frameworks at semiempirical and density functional theory levels. Our implementation is based on performing the FENEB optimization by uncoupling the optimization of the band in a perpendicular and tangential direction. In each step, a full optimization with the spring force is performed, which guarantees that the images remain evenly distributed. The robustness of the method and the influence of sampling on the quality of the optimized MFEP and its associated free energy barrier are studied. We show that the FENEB method provides a good estimation of the reaction barrier even with relatively short simulation times, supporting that its combination with QM/MM frameworks provides an adequate tool to study chemical processes in complex environments.