• Energy Research
• Restricted close
• Embargo close
• GB close
• ES close
• AU close

Artículos en revistas Numerical models of transmission-constrained electricity markets are used to inform regulatory decisions. How robust are their results? Three research groups used the same data set for the northwest Europe power market as input for their models. Under competitive conditions, the results coincide, but in the Cournot case, the predicted prices differed significantly. The Cournot equilibria are highly sensitive to assumptions about market design (whether timing of generation and transmission decisions is sequential or integrated) and expectations of generators regarding how their decisions affect transmission prices and fringe generation. These sensitivities are qualitatively similar to those predicted by a simple two-node model. info:eu-repo/semantics/publishedVersion

Abstract The organic Rankine cycle (ORC) has been growing in importance as a technology for producing electricity from low temperature waste and renewable heat sources. In small-scale applications, the most used working fluid has been HFC-245fa, although this is being substituted for low GWP alternatives. A new HCFO working fluid, HCFO-1224yd(Z), has appeared as a possible alternative for HFC-245fa. In this study, this alternative working fluid is analysed and, finally, the working fluid is experimentally tested as drop-in alternative in a commercial ORC system. The main purpose is to determine the feasibility of using HCFO-1224yd(Z) as a drop-in replacement for HFC-245fa in a real facility that was initially designed to operate with HFC-245fa. The results show how the use of HCFO-1224yd(Z) offers power output that ranges from 7.5% to 17.4% lower than that provided by HFC-245fa. Although HFC-245fa offers higher power output, the results show that HCFO-1224yd(Z) offers up to 7.7% higher cycle net efficiency; this is due to the higher input thermal rate required by HFC-245fa. Finally, HCFO-1224yd(Z) has been stated as a suitable alternative to HFC-245fa as a drop-in replacement in a small-scale, low-temperature ORC, which increases its attractiveness for heat source with higher temperatures.

Coherence in Photosynthesis It is unclear how energy absorbed by pigments in antenna proteins is transferred to the central site of chemical catalysis during photosynthesis. Hildner et al. (p. 1448 ) observed coherence—prolonged persistence of a quantum mechanical phase relationship—at the single-molecule level in light-harvesting complexes from purple bacteria. The results bolster conclusions from past ensemble measurements that coherence plays a pivotal role in photosynthetic energy transfer. Hayes et al. (p. 1431 , published online 18 April) examined a series of small molecules comprised of bridged chromophores that also manifest prolonged coherence.

Capítulos en libros This paper assesses the scalability and replicability of smart grid projects, by means of the identification of limitations and barriers faced by these projects. Factors have been identified that impact a project s scalability and replicability by means of a review of demonstration projects. The factors are of technical, economic, regulatory and social acceptance nature, and they describe requirements for scalability and replicability. Data was collected from ongoing European smart grid demonstration projects through the use of an elaborated questionnaire on the identified factors. Which allowed to quantify the status quo to what extent projects have taken these factors into account. Dew to their nature the derived factors can be categorized in technical, economic and regulatory & stakeholder related factor areas The obtained results allowed the identification of barriers, i.e. limitations regarding the scalability and replicability of smart grid projects. In particular projects face barriers regarding the absence of standards, the physical limits of the existing infrastructure, the absence of cost-benefit analyses, the neglect of varying macro-economic factors, stakeholder involvement and from the dependency of projects on regional or national regulatory frameworks and market designs. info:eu-repo/semantics/publishedVersion

The lifetime and reliability of power transformers are primarily dependent on the hot-spot temperature in the windings, as temperature is the most important factor determining the insulation degradation rate. Key to removing the heat from the transformer is the radiator which must be carefully designed to keep the temperatures within limits under all operating conditions whilst minimizing the transformer size, weight and cost. This paper compares the analytical method used to predict the radiator performance with computational fluid dynamics (CFD) models in terms of heat dissipation. It is found that the analytical method and CFD models give similar results in the air natural (AN) cooling modes, whereas the analytical method overestimates the heat dissipation in the air forced (AF) cooling modes. Moreover, the thermal conduction effect in the radiator wall is investigated under different operating conditions and for different radiator sizes using the CFD models. The simulation results indicate that the radiator wall contributes to 6%-10% of the total heat dissipation under some circumstances and therefore should not be simply ignored in radiator models.

Selective removal of coatings by lasers can facilitate the reuse of coated tools in a circular economy. In order to optimise and control the process, it is essential to study the impact of process input variables on process performance. In this paper, coating removal from tooling was carried out using a picosecond a pulsed fibre laser, in order to investigate the effects of laser pulse energy, pulse frequency, galvo scanning speed and scanning track stepover. A fractional factorial design of experiments and analysis of variance was used to optimise the process; considering cleaning rate, specific energy consumption and surface integrity as assessed by changes in surface roughness and composition of the tooling after laser cleaning. The results shows synergy between cleaning rate and specific energy with the laser pulse frequency and galvo scanning speed as the two most significant factors, while the laser pulse energy had the greatest contribution to changes in surface composition. Based on extensive experiments, the relationship between processing rate and system specific energy consumption was mathematically modelled. The paper contributes a new specific energy model for laser cleaning and provides a benchmark of the process energy requirements compared to other manufacturing processes. Additionally, the generic scientific learning from this is that the rate of energy input is a key tool for maximising cleaning rate and minimising specific energy requirements, while the intensity of energy applied, is a key metric that influences surface integrity. More complex factors, influence the surface integrity.

A literature review was conducted aiming at investigating the use of Sustainability, Lean, Green and eco-efficiency concepts, as well as meaningful combinations of those, on the field of Production and Operations Management. The study reports on the scientific papers published in all major journals in the field over the period 2001–2015. A set of 83 papers from 40 journals were selected for further analyzes, aiming at uncovering the existing level of awareness and use of the synergic and symbiotic relationship between Lean Manufacturing and Green Production. The findings show that a modest share of papers, about 30 %, explicitly recognize the Lean-Green joint approach. The same study testifies a clear growth pattern, which is patently reinforced in the last two and a half years, on the number of papers that behold a combined approach towards more efficient and cleaner production activities. The research has highlighted that the Lean-Green link does, in fact, exist and is gaining momentum, but requires further reinforcements from the scientific community, as well as from the companies, to deliver excelled and environmentally sound production systems. FCT Strategic Project PEst2015-2020, reference UID/CEC/00319/2013. info:eu-repo/semantics/publishedVersion

Artículos en revistas Security-constrained unit commitment (SCUC) problem is one of the necessary tools for system operators to make operational planning and real-time operation. The internalization of transmission-network and security constraints (e.g. N-1 criterion) could lead to different decisions in the generation dispatch. However, the computational burden of this problem is challenging mainly due to its inherent large problem size. Therefore, this paper proposes an N-1 security constrained formulation based on the Line Outage Distribution Factors (LODF) instead of the one based on Injection Sensitivity Factors (ISF). This formulation is at the same time more compact than analogous formulations for contingency constraints; hence, it presents a lower computational burden. The computational efficiency of the proposed formulation is shown by solving the SCUC of the IEEE 118 bus system with LODF and ISF. Additionally, an iterative methodology for filtering the active N-1 congestion constraints is detailed, and its implementation for large-scale systems is described. The results show that the proposed filter reduces the computational time by approximately 70% in comparison to the complete formulation of N-1 constraints in SCUC. info:eu-repo/semantics/publishedVersion