• Energy Research
• Closed Access close
• natural sciences close
• IN close
• GB close

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

Abstract An orange and an apple juice each containing 250–385 ppm tin were under suspicion of having caused an outbreak of food poisoning in Kuwait in 1967 but did not cause any toxic signs when fed to pigeons, cats and dogs. One cat out of 11 vomited when fed an orange juice containing 540 ppm tin derived from the container, and with juices containing 1370 ppm tin, 20–30% of the cats vomited but none of the dogs was affected. Fruit juices containing 2000 ppm tin caused vomiting in up to 40% of the cats. Modification of orange juices with a high tin content by addition of nitrate or ethanol or by adjustment of the pH from 3 to 6 did not affect the incidence of vomiting. No toxic signs were produced in rats given fruit juices containing added tin salts up to a level of 995 ppm or in rats and cats given aqueous solutions of tin salts (up to 1200 ppm tin) in citric acid. Solid foods containing tin derived from the containers up to the highest level obtainable (470 ppm) had no toxic effect when fed to dogs and cats. Five human volunteers showed no toxic signs after drinking fruit juices containing 498, 540 or 730 ppm tin derived from the containers, but all five had some gastro-intestinal disturbance after drinking a fruit juice containing 1370 ppm tin. A repeat experiment with the latter juice had no effect in four of the volunteers and only mild symptoms in the fifth. In rats and cats, there was no evidence of tin absorption 24 hr after ingestion of fruit juices containing high levels of tin. No tin was recovered from the urine and in the rats 99% was recovered from the faeces. Only minute amounts of tin could be found in the body, apart from the alimentary tract, of a rat that had been given orange juice with a high tin content ad lib. instead of drinking water for 7 days. It is concluded that toxic signs follow the drinking of tin-containing fruit juices by man and cats only with tin levels of approximately 1400 ppm and above, that there is no evidence from these experiments that toxicity is due to the absorption of tin and that the most likely cause is local irritation of the mucous membrane of the alimentary tract.

The present research was mainly focused on the production of biodiesel from Annona squamosa oil using a synthesized Ni-doped CaO nanocatalyst. The optimization of the transesterification reaction parameters was studied through response surface methodology. The highest biodiesel yield of 99.1% was achieved with the optimized conditions of 7.86% catalyst concentration, 442 RPM, 15.19:1 molar ratio of methanol to oil, reaction temperature of 55.8°C and reaction time of 63.3 min. The results obtained from reaction kinetics study showed a good fit with a first-order kinetic model. The activation energy and R2value were determined to be 53.7 kJ/mol and 0.90, respectively. The synthesized Ni-doped CaO nanocatalyst was characterized using Scanning Electron Microscope with Energy Dispersive X-ray Spectroscopy which confirms the presence of nickel, calcium and oxygen. Also, the average size of the nanocatalyst was found to be 48.79 nm. The Fourier Transform–Infrared Spectroscopy results showed the occurrence of functional groups such as C-H and C = O bonds in the synthesized Ni-doped CaO nanocatalyst. The presence of fatty acid methyl esters in the produced biodiesel was analyzed through Gas Chromatography-Mass Spectrometry analysis. The obtained results from the current study provides the possibility and insights for sustainable biodiesel production and a greener environment.

AbstractNiFe2O4/polythiophene nanocomposite was synthesized by in situ chemical oxidative polymerization of thiophene in NiFe2O4 nanoparticles presence, whereas NiFe2O4 nanoparticles were prepared via coprecipitation method. Fourier transform infrared (FTIR), X‐ray diffraction (XRD), UV–Visible, and SEM, EDX techniques were used for characterization of the nanocomposite. The effect of various parameters such as adsorbent dose, contact time, initial dye concentration, and initial pH of solution on the adsorption of Janus green B (JG) and Fuchsin basic (FB) onto the nanocomposite was optimized by batch studies. The equilibrium uptake data ascribed well to the Langmuir model with maximum adsorption capacity of 143 and 498 mg/g at 303 K for JG and FB, respectively. The exceptional high adsorption capacity of NiFe2O4/polythiophene nanocomposite for JG and FB was ascribed to π‐π and electrostatic interactions. Kinetics studies pointed out that JG and FB removal followed pseudo‐second order model. The negative values of ΔH° (JG: –47.28; FB: −38.00 kJ/mol) and ΔG° (JG: −9.347 to −6.442; FB: −14.16 to – 12.85 kJ/mol) pointed out the feasibility, spontaneity, and exothermic nature of removal process. Negative value of ΔS° (JG: –0.125; FB: –0.078 kJ/mol) suggested decrease in randomness at the solid/liquid interface. The results showed that NiFe2O4/polythiophene is an appealing adsorbent for the uptake of JG and FB dyes from aquatic environment.

Polymer-based multicolor emissive materials have growing demand due to their potential applications in various fields such as full-color displays, bioimaging, and light sources because of their processability and high stability. Herein, we report dual-color emissive hybrid materials based on biocompatible poly(l-lactide) and polyethylene glycol-modified two-dimensional layered double hydroxide quantum dots (PEG-LDHQDs). The morphology of polymer films tunes the spatial distribution of QDs within the polymer matrix, modulating the energy transfer between the QDs and affording the dual emission behavior in the aggregated states. The amorphous hybrid films show single emission (blue) from the finely dispersed QDs (mostly isolated) within the polymer matrix. In contrast, dual emission (blue and red) was observed when the polymer was crystallized due to the possible accumulation of QDs at the interface of crystalline and amorphous phases in the lamellar structure. Furthermore, the dual emission could be enhanced by the aggregation of QDs on the pores of the breath figure pattern constructed on the surface of the hybrid film.

Abstract A series of triazole bridged BODIPY-conjugates were synthesized under click reaction conditions. The 3-azido BODIPY was generated in situ by treating 3-bromo BODIPY with NaN 3 in CH 3 CN at room temperature for 60 min and reacted with appropriate ethynyl containing chromophore/redox active unit, such as ferrocene, BODIPY, Zn(II) porphyrin, 21,23-dithiaporphyrin, BF 2 -smaragdyrin in the presence of CuI/DIPEA in THF/CH 3 CN solvent. The conjugates were purified by column chromatography and obtained pure compounds in 45–50% yields. The conjugates were characterized by HR-MS, 1D, 2D, 19 F and 11 B NMR and X-ray crystallography for BODIPY-ferrocene conjugate. Absorption and electrochemical studies showed features of both the moieties present in the conjugates and also support interaction between the two moieties in the conjugates. The fluorescence studies supported an efficient energy transfer from BODIPY unit to BF 2 -smaragdyrin unit in BODIPY–BF 2 -smaragdyrin conjugate but the energy transfer was not efficient in BODIPY–Zn(II) porphyrin and BODIPY–21,23-dithiaporphyrin conjugates.

Investigating the impact of climate variables on net primary productivity is crucial to evaluate the ecosystem health and the status of forest type response to climate change. The objective of this paper is (1) to estimate spatio-temporal patterns of net primary productivity (NPP) during 2001 to 2010 in a tropical deciduous forest based on the input variable dataset (i.e.meteorological and biophysical) derived from the remote sensing and other sources and (2) to investigate the effects of climate variables on NPP during 2001 to 2010. The study was carried out in Katerniaghat Wildlife Sanctuary that forms a part of a tropical forest and is situated in Uttar Pradesh, India, along the Indo-Nepal border. Mean annual NPP was observed to be highest during 2007 with a value of 878 g C m-2 year-1 and 781.25 g C m-2 year-1 for sal and teak respectively. A decline in mean NPP during 2002-2003, 2005 and 2008-2010 could be attributed to drought, increased temperature and vapour pressure deficit (VPD). The time lag correlation analysis revealed precipitation as the major variables affecting NPP, whereas combination of temperature and VPD showed dominant effect on NPP as revealed by generalized linear modelling. The carbon gain in NPP in sal forest was observed to be marginal higher than that of teak plantation throughout the study period. The decrease in NPP was observed during 2010, pertaining to increased VPD. Contribution of different climatic variables through some link process was revealed in statistical analysis and clearly indicated the co-dominance of all the variables in explaining NPP.