• Energy Research
• economics and business close
• 13. Climate action close
• IT close
• PL close

Car-sharing services are developing at an ever-increasing pace. Taking into account the reduction of carbon dioxide emissions and pursuit of the sustainable development of transport, implementing electric cars in car-sharing fleets is being proposed. On the one hand, these types of vehicles are referred to as emission-free, but on the other hand, their environmental friendliness is questionable due to the emission of carbon dioxide during the production of energy to power them. Although many scientific papers are devoted to the issue of reducing emissions through car sharing, there is a research gap concerning the real production of carbon dioxide by car-sharing vehicles during car-sharing trips. To fill this research gap, the objective of the article was to analyze the actual level of carbon dioxide emissions from combustion and electric vehicles from car-sharing systems produced when renting rides. The test results showed that the electric car turned out to be significantly less emitting. The use of electric vehicles in car-sharing fleets can reduce carbon dioxide emissions from 14% to 65% compared to using cars with internal combustion engines. However, the key role during car-sharing trips is played by the driving style of the drivers, which has been omitted from the literature to date. This should be properly regulated by service providers and focus on the proper use of energy from electric vehicle batteries, especially at low temperatures. The article provides support for operators planning to modernize their fleet of vehicles and fills the research gap concerning car-sharing emissions.

How can urban policies and planning approaches help in achieving a safer mobility and carbon reduction in the transport sector? The attention of planners and policy makers towards the promotion of sustainability and reduction of environmental impacts has grown in recent years. This paper investigates the role that Urban Planning plays in the long term towards a safer and climate friendlier mobility, highlighting the need for integrated approaches gathering spatial planning and mobility management. After a review of several urban policies and planning strategies, initiatives, and approaches, mainly based on the urban scale, the paper presents an urban regeneration case study leading to an increase of pedestrian accessibility at the neighborhood level. This can be seen as a support tool to foster sustainable, safe, and climate friendly mobility in cities. The results of the performed analysis show a dependency of accessibility from two different factors: the distribution of services and the capillarity of the soft mobility network, which can contribute to creating a more walkable space.

This paper provides an initial analysis of the EU ETS based on the installation-level data for verified emissions and allowance allocations in the first trading year. Those data, released on May 15, 2006, and subsequent updates revealed that CO2 emissions were about 4% lower than the allocated allowances. The main objective of the paper is to shed light on the extent to which over-allocation and abatement have taken place in 2005. We propose a measure by which over-allocation can be judged and provide estimates of abatement based on emissions data and indicators of economic activity as well as trends in energy and carbon intensity. Finally, we discuss the insights and implications that emerge from this tentative assessment.

The focus of the present paper is the development of a resilience framework suitable to be applied in assessing the safety of ship LNG (Liquefied Natural Gas) bunkering process. Ship propulsion considering LNG as a possible fuel (with dual fuel marine engines installed on board) has favored important discussions about the LNG supply chain and delivery on board to the ship power plant. Within this context, a resilience methodological approach is outlined, including a case study application, to demonstrate its actual effectiveness. With specific reference to the operative steps for LNG bunkering operations in the maritime field, a dynamic model based on Bayesian inference and MCMC simulations can be built, involving the probability of operational perturbations, together with their updates based on the hard (failures) and soft (process variables deviations) evidence emerging during LNG bunkering operations. The approach developed in this work, based on advanced Markov Models and variational fitting algorithms, has proven to be a useful and flexible tool to study, analyze and verify how much the perturbations of systems and subsystems can be absorbed without leading to failure.

This paper analyzes the effect of environmental policies on the direction of energy innovation across countries over the period 1990-2012. Our novelty is to use threshold regression models to allow for discontinuities in policy effectiveness depending on a country's relative competencies in renewable and fossil fuel technologies. We show that the dynamic incentives of environmental policies become effective just above the median level of relative competencies. In this critical second regime, market-based policies are moderately effective in promoting renewable innovation, while command-and-control policies depress fossil based innovation. Finally, market-based policies are more effective to consolidate a green comparative advantage in the last regime. We illustrate how our approach can be used for policy design in laggard countries.

An original methodology for the Water Footprint Assessment (WFA) of a Product for the wine-making industry sector is presented, with a particular focus on the evaluation procedure of the grey water. Results obtained with the proposed methodology are also presented for an Italian case study. The product was analyzed using a life-cycle approach, with the aim of studying the water volumes of each phase according to the newly-released ISO 14046 international standard. The functional unit chosen in this study is the common 0.75 liter wine bottle. An in-house software (V.I.V.A.) was implemented with the goal of accounting for all the contributions in a cradle-to-grave approach. At this stage, however, minor water volumes associated with some foreground and background processes are not assessed. The evaluation procedure was applied to a case study and green, blue, and grey water volumes were computed. Primary data were collected for a red wine produced by an Umbrian wine-making company. Results are in accordance with global average water footprint values from literature, showing a total WF of 632.2 L/bottle, with the major contribution (98.3%) given by green water, and minor contributions (1.2% and 0.5%) given by grey and blue water, respectively. A particular effort was dedicated to the definition of an improved methodology for the assessment of the virtual water volume required to dilute the load of pollutants on the environment below some reference level (Grey WF). The improved methodology was elaborated to assure the completeness of the water footprint assessment and to overcome some limitations of the reference approach. As a result, the overall WF can increase up to 3% in the most conservative hypotheses.

Current industrial production is driven by increasing globalization, which has led to a steady increase in production volumes and complexity of products aimed at the pursuit of meeting the needs of customers. In this context, one of the main tools in the management of customer value is Lean Manufacturing or Production, though it is considered primarily as a set of tools to reduce the total cost of the resources needed to achieve such needs. This philosophy has recently been enriched in the literature with case studies that link Lean Management (LM) with the improvement of environmental sustainability. The consequence is an expansion of the Computer Integrated Manufacturing (CIM); indeed, CIM, currently, combining and integrating the key business functions (e.g., business, engineering, manufacturing, and information management) with a view of the life cycle, does not highlight the strategic role of the environmental aspects. In order to deal with the increasingly rapid environmental degradation that is reflected in society, in terms of both economy and quality of life, Industrial Ecology (IE) introduced a new paradigm of principles and instruments of analysis and decision support (e.g., Life Cycle Assessment—LCA, Social Life Cycle Assessment -SLCA, Material Flow Account—MFA, etc.) that can be considered as the main basis for integrating the environmental aspects in each strategy, design, production, final product, and end of life management, through the re-engineering of processes and activities towards the development of an eco-industrial system. This paper presents the preliminary observations based on a analysis of both theories (LM-IE) and provides a possible assessment of the key factors relevant to their integration in a “lean environmental management”, highlighting both positives (lights) and possible barriers (shadows).