• Energy Research
• Open Source close
• Embargo close
• other engineering and technologies close
• FR close
• JP close
• PH close

The chemical and petrochemical sector is by far the largest industrial energy user, accounting for 30% of the industry's total final energy use. However, due to its complexity its energy efficiency potential is not well understood. This article analyses the energy efficiency potential on a country level if Best Practice Technologies (BPT) were implemented in chemical processes. Two approaches are applied and an improved dataset referring to Europe has been developed for BPT energy use. This methodology has been applied to 66 products in fifteen countries that represent 70% of chemical and petrochemical sector's energy use worldwide. The results suggest a global energy efficiency potential of 16% for this sector, excluding savings in electricity use and by higher levels of process integration, combined heat and power (CHP) and post-consumer plastic waste treatment. The results are more accurate than previous estimates. The results suggest significant differences between countries, but a cross-check based on two different methods shows that important methodological and data issues remain to be resolved. Further refinement is needed for target setting, monitoring and informing energy and climate negotiation processes. For the short and medium term, a combination of benchmarking and country level analysis is recommended.

The chemical and petrochemical sector is by far the largest industrial energy user, accounting for 30% of the industry's total final energy use. However, due to its complexity its energy efficiency potential is not well understood. This article analyses the energy efficiency potential on a country level if Best Practice Technologies (BPT) were implemented in chemical processes. Two approaches are applied and an improved dataset referring to Europe has been developed for BPT energy use. This methodology has been applied to 66 products in fifteen countries that represent 70% of chemical and petrochemical sector's energy use worldwide. The results suggest a global energy efficiency potential of 16% for this sector, excluding savings in electricity use and by higher levels of process integration, combined heat and power (CHP) and post-consumer plastic waste treatment. The results are more accurate than previous estimates. The results suggest significant differences between countries, but a cross-check based on two different methods shows that important methodological and data issues remain to be resolved. Further refinement is needed for target setting, monitoring and informing energy and climate negotiation processes. For the short and medium term, a combination of benchmarking and country level analysis is recommended.

Green energy technologies (GETs) are environmentally friendly in nature, making a promising contribution to attaining net-zero carbon goals. Although the Pakistani government has begun using GETs to minimize the adverse effects of carbon emissions, consumers' adoption rate is quite low. There are few studies examining consumers' desire to adopt GETs in the country. This study attempts to fill this research gap and also contributes by adding three novel factors to the theory of planned behavior (i.e., green energy technology awareness, openness to experience, and green energy technology discomfort) to comprehensively analyze the impact of various factors influencing consumers' desire to adopt GETs. For this purpose, the study establishes a systematic research framework. Data were collected from (n = 330) households in the five major cities (Peshawar, Abbottabad, Mardan, Mingora, and Swabi) of Khyber Pakhtunkhwa Province via an inclusive questionnaire survey. The formulated hypotheses are evaluated and scrutinized using structural equation modeling. The results reveal that environmental concern (β = 0.245), green energy technology awareness (β = 0.362), openness to experience (β = 0.256), and green energy technology benefits (β = 0.225) positively affect consumers' desire to adopt GETs. On the other hand, green energy technology costs (β = 0.325) and green energy technology discomfort (β = 0.395) have a negative effect on consumers' adoption of GETs. The research findings emphasize the importance of increasing recognition of GETs, reforming policy frameworks, and providing budget-friendly and user-friendly technologies. Research limitations and future research perspectives are also addressed.

Green energy technologies (GETs) are environmentally friendly in nature, making a promising contribution to attaining net-zero carbon goals. Although the Pakistani government has begun using GETs to minimize the adverse effects of carbon emissions, consumers' adoption rate is quite low. There are few studies examining consumers' desire to adopt GETs in the country. This study attempts to fill this research gap and also contributes by adding three novel factors to the theory of planned behavior (i.e., green energy technology awareness, openness to experience, and green energy technology discomfort) to comprehensively analyze the impact of various factors influencing consumers' desire to adopt GETs. For this purpose, the study establishes a systematic research framework. Data were collected from (n = 330) households in the five major cities (Peshawar, Abbottabad, Mardan, Mingora, and Swabi) of Khyber Pakhtunkhwa Province via an inclusive questionnaire survey. The formulated hypotheses are evaluated and scrutinized using structural equation modeling. The results reveal that environmental concern (β = 0.245), green energy technology awareness (β = 0.362), openness to experience (β = 0.256), and green energy technology benefits (β = 0.225) positively affect consumers' desire to adopt GETs. On the other hand, green energy technology costs (β = 0.325) and green energy technology discomfort (β = 0.395) have a negative effect on consumers' adoption of GETs. The research findings emphasize the importance of increasing recognition of GETs, reforming policy frameworks, and providing budget-friendly and user-friendly technologies. Research limitations and future research perspectives are also addressed.

The production of charcoal for its many uses requires a careful selection of biomass and pyrolysis conditions, especially temperature, to ensure suitable quality. To do so, physical, chemical, and mechanical energy must be considered. This study aimed to analyze the yields and properties of charcoal produced at different pyrolysis temperatures. Eucalyptus saligna wood was pyrolyzed in a reactor with final temperatures of 450, 550, 650, 750, 850 and 950 °C. The yields of charcoal, pyroligneous liquid and non-condensable gases were determined. Mass loss was determined for each temperature. Charcoal analysis included the determination of the apparent density, proximate analysis, heating value, mechanical strength, X-ray images for the internal visualization of its structure and hygroscopicity test. Relevant charcoal properties for the steel industry and barbecue, such as density, mechanical strength, heating value and hygroscopicity, show variable trends from pyrolysis at 650 °C. The results show that pyrolysis temperature had a great impact on the properties of charcoal. The apparent density of charcoal rose from 500 °C and had no relation to the breaking strength. When the pyrolysis temperature was raised, an increase in both apparent and true densities, internal fissures and cracks and fixed carbon content of charcoal was observed.

The production of charcoal for its many uses requires a careful selection of biomass and pyrolysis conditions, especially temperature, to ensure suitable quality. To do so, physical, chemical, and mechanical energy must be considered. This study aimed to analyze the yields and properties of charcoal produced at different pyrolysis temperatures. Eucalyptus saligna wood was pyrolyzed in a reactor with final temperatures of 450, 550, 650, 750, 850 and 950 °C. The yields of charcoal, pyroligneous liquid and non-condensable gases were determined. Mass loss was determined for each temperature. Charcoal analysis included the determination of the apparent density, proximate analysis, heating value, mechanical strength, X-ray images for the internal visualization of its structure and hygroscopicity test. Relevant charcoal properties for the steel industry and barbecue, such as density, mechanical strength, heating value and hygroscopicity, show variable trends from pyrolysis at 650 °C. The results show that pyrolysis temperature had a great impact on the properties of charcoal. The apparent density of charcoal rose from 500 °C and had no relation to the breaking strength. When the pyrolysis temperature was raised, an increase in both apparent and true densities, internal fissures and cracks and fixed carbon content of charcoal was observed.

Abstract The safe decommissioning as well as decontamination of the radioactive waste resulting from the nuclear accident in Fukushima Daiichi represents a huge task for the next decade. At present, research and development on long-term safe storage containers has become an urgent task with international cooperation in Japan. One challenge is the generation of hydrogen and oxygen in significant amounts by means of radiolysis inside the containers, as the nuclear waste contains a large portion of sea water. The generation of radiolysis gases may lead to a significant pressure build-up inside the containers and to the formation of flammable gases with the risk of ignition and the loss of integrity. In the framework of the project “R&D on technology for reducing concentration of flammable gases generated in long-term waste storage containers” funded by the Japanese Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT), the potential application of catalytic recombiner devices inside the storage containers is investigated. In this context, a suitable catalyst based on the so-called intelligent automotive catalyst for use in a recombiner is under consideration. The catalyst is originally developed and mass-produced for automotive exhaust gas purification, and is characterized by having a self-healing function of precious metals (Pd, Pt and Rh) dissolved as a solid solution in the perovskite type oxides. The basic features of this catalyst have been tested in an experimental program. The test series in the REKO-4 facility has revealed the basic characteristics of the catalyst required for designing the recombiner system.

Abstract The safe decommissioning as well as decontamination of the radioactive waste resulting from the nuclear accident in Fukushima Daiichi represents a huge task for the next decade. At present, research and development on long-term safe storage containers has become an urgent task with international cooperation in Japan. One challenge is the generation of hydrogen and oxygen in significant amounts by means of radiolysis inside the containers, as the nuclear waste contains a large portion of sea water. The generation of radiolysis gases may lead to a significant pressure build-up inside the containers and to the formation of flammable gases with the risk of ignition and the loss of integrity. In the framework of the project “R&D on technology for reducing concentration of flammable gases generated in long-term waste storage containers” funded by the Japanese Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT), the potential application of catalytic recombiner devices inside the storage containers is investigated. In this context, a suitable catalyst based on the so-called intelligent automotive catalyst for use in a recombiner is under consideration. The catalyst is originally developed and mass-produced for automotive exhaust gas purification, and is characterized by having a self-healing function of precious metals (Pd, Pt and Rh) dissolved as a solid solution in the perovskite type oxides. The basic features of this catalyst have been tested in an experimental program. The test series in the REKO-4 facility has revealed the basic characteristics of the catalyst required for designing the recombiner system.