• Energy Research
• Open Source close
• Embargo close
• IT close
• CNR ExploRA close

The optical and photovoltaic properties of Si NCs / SiC multilayers (MLs) are investigated using a membrane-based solar cell structure. By removing the Si substrate in the active cell area, the MLs are studied without any bulk Si substrate contribution. The occurrence is confirmed by scanning electron microscopy and light-beam induced current mapping . Optical characterization combined with simulations allows us to determine the absorption within the ML absorber layer, isolated from the other cell stack layers. The results indicate that the absorption at wavelengths longer than 800 nm is only due to the SiC matrix. The measured short-circuit current is significantly lower than that theoretically obtained from absorption within the ML absorber, which is ascribed to losses that limit carrier extraction. The origin of these losses is discussed in terms of the material regions where recombination takes place. Our results indicate that carrier extraction is most efficient from the Si NCs themselves, whereas recombination is strongest in SiC and residual a-Si domains . Together with the observed onset of the external quantum efficiency (EQE) at 700-800 nm, this fact is an evidence of quantum confinement in Si NCs embedded in SiC on device level.

The optical and photovoltaic properties of Si NCs / SiC multilayers (MLs) are investigated using a membrane-based solar cell structure. By removing the Si substrate in the active cell area, the MLs are studied without any bulk Si substrate contribution. The occurrence is confirmed by scanning electron microscopy and light-beam induced current mapping . Optical characterization combined with simulations allows us to determine the absorption within the ML absorber layer, isolated from the other cell stack layers. The results indicate that the absorption at wavelengths longer than 800 nm is only due to the SiC matrix. The measured short-circuit current is significantly lower than that theoretically obtained from absorption within the ML absorber, which is ascribed to losses that limit carrier extraction. The origin of these losses is discussed in terms of the material regions where recombination takes place. Our results indicate that carrier extraction is most efficient from the Si NCs themselves, whereas recombination is strongest in SiC and residual a-Si domains . Together with the observed onset of the external quantum efficiency (EQE) at 700-800 nm, this fact is an evidence of quantum confinement in Si NCs embedded in SiC on device level.

The use of graphene as transparent conducting layer in devices that require high temperature processing is proposed. The material shows stability upon thermal treatments up to 1100 °C ifc apped with a sacrificial silicon layer. The use of Cu foil or evaporated Cu as catalysts in Catalytic-Chemical Vapor Deposition growth gives rise to graphene ofs imilar properties, which represents a promising result in view of its direct integration in microelectronic devices. Photovoltaic p-i-n thin film devices were fab- ricated on the as-deposited or annealed graphene membranes and compared with similar devices that incorporate as-deposited Indium Tin Oxide. No degradation in series resistance is observed for the annealed device. A 3.7% and 2.8% photovoltaic conversion efficiency is observed on the devices fabricated on as-transferred and on annealed graphene respectively. The major limitation derives from the high sheet resistance of the as-transferred state-of-the-art material. The results opens the way to the use of graphene in applications that require transparent conducting layers resistant to high temperature pro- cessing.

The use of graphene as transparent conducting layer in devices that require high temperature processing is proposed. The material shows stability upon thermal treatments up to 1100 °C ifc apped with a sacrificial silicon layer. The use of Cu foil or evaporated Cu as catalysts in Catalytic-Chemical Vapor Deposition growth gives rise to graphene ofs imilar properties, which represents a promising result in view of its direct integration in microelectronic devices. Photovoltaic p-i-n thin film devices were fab- ricated on the as-deposited or annealed graphene membranes and compared with similar devices that incorporate as-deposited Indium Tin Oxide. No degradation in series resistance is observed for the annealed device. A 3.7% and 2.8% photovoltaic conversion efficiency is observed on the devices fabricated on as-transferred and on annealed graphene respectively. The major limitation derives from the high sheet resistance of the as-transferred state-of-the-art material. The results opens the way to the use of graphene in applications that require transparent conducting layers resistant to high temperature pro- cessing.

Power system controls are vulnerable to cyber-attacks that can seriously affect and even inhibit their operation. Such attacks may affect large portions of the power system, make repair difficult and cause huge societal impact, so pressure to ensure cyber-security of control and communication systems is now strong worldwide. Several cyber-security frameworks were developed, but it is rather difficult to anticipate adoption costs and benefits, and this hampers their generalised adoption. T his paper focuses on the outcome of two case studies (concerning the Italian power generation and the Polish transmission systems. The socio-economic impact of failures and the costs of standard adoption are estimated on an objective basis. It is up to public authorities to decide whether to require the adoption of security standards to operators in the electric system. The nature of public good of security underlines the necessity of public support for this operation, but we discuss the extent and the management of this support.

Power system controls are vulnerable to cyber-attacks that can seriously affect and even inhibit their operation. Such attacks may affect large portions of the power system, make repair difficult and cause huge societal impact, so pressure to ensure cyber-security of control and communication systems is now strong worldwide. Several cyber-security frameworks were developed, but it is rather difficult to anticipate adoption costs and benefits, and this hampers their generalised adoption. T his paper focuses on the outcome of two case studies (concerning the Italian power generation and the Polish transmission systems. The socio-economic impact of failures and the costs of standard adoption are estimated on an objective basis. It is up to public authorities to decide whether to require the adoption of security standards to operators in the electric system. The nature of public good of security underlines the necessity of public support for this operation, but we discuss the extent and the management of this support.

Silicon carbide/silicon rich carbide multilayers, aimed at the formation of silicon nanodots for photovoltaic applications, have been studied. The electrical properties have been investigated at the nano-scale by conductive Atomic Force Microscopy (c-AFM) and at macro-scale by temperature dependent conductivity measurements. The mixture is composed of highly conductive Si nanoclusters and moderately conductive SiC nanoclusters in a disordered matrix. The conduction mechanism takes place via band states induced by the disorder at the interface between nanodot clusters. Structural properties have been extracted by optical spectroscopy analyses. The results contribute to the understanding of the microscopical electronic mechanisms of the composite material, which is a candidate for third generation photovoltaics.

Silicon carbide/silicon rich carbide multilayers, aimed at the formation of silicon nanodots for photovoltaic applications, have been studied. The electrical properties have been investigated at the nano-scale by conductive Atomic Force Microscopy (c-AFM) and at macro-scale by temperature dependent conductivity measurements. The mixture is composed of highly conductive Si nanoclusters and moderately conductive SiC nanoclusters in a disordered matrix. The conduction mechanism takes place via band states induced by the disorder at the interface between nanodot clusters. Structural properties have been extracted by optical spectroscopy analyses. The results contribute to the understanding of the microscopical electronic mechanisms of the composite material, which is a candidate for third generation photovoltaics.