• Energy Research
• Closed Access close
• Embargo close
• 11. Sustainability close
• 6. Clean water close
• 9. Industry and infrastructure close
• US close
• CA close

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

Given the considerable scale of distribution networks in urban and rural areas, as well as the lack of management records, adjustments of switches during the distribution system operation are poorly documented. Such deficiency results in the inaccuracy of models stored in the distribution network automation system, and thus misleads the state estimation. With the emergence of information and communication technology, a large number of the feeder and residential smart meter data are accumulated. Such data can help recognize the operation modes of distribution networks by analyzing the relationships between the on/off states of switches and the voltage correlations among buses. However, the limited quantity and quality of the sampling data restrict the implementation of data-driven recognition. In this paper, a physical-probabilistic-network (PPN) model applied for inferring overall operation mode of distribution networks is proposed. Based on which, a belief propagation-based algorithm is proposed for the inference even under situations when there are only partial bus voltages data available. Meanwhile, the required variable for inference can be reduced from the active trail analysis. Experiment results are used to compare its performance with classic methods and to prove its effectiveness and advantages.

Abstract Building energy performance is often inadequate given design goals. While different types of assessment methods exist, they either do not consider design goals and/or are not general enough to integrate new and innovative energy concepts. Furthermore, existing assessment methods focus mostly on the building and system level while ignoring more detailed data. With the availability and affordability of more detailed measured data, the increased number of measured data points requires a structure to organize these data. This paper presents the Energy Performance Comparison Methodology (EPCM), which enables the identification of performance problems based on a comparison of measured data and simulated data representing design goals. The EPCM is based on an interlinked building object hierarchy that structures the detailed performance data from a spatial and mechanical perspective. This research is developed and tested on multiple case studies that provide real-life context and more generality compared to single case studies.

Abstract For 118 million residential housing units in the U.S., there is currently a gap between the potential energy savings that can be achieved through the use of existing energy efficiency technologies, and the actual level of energy savings realized, particularly for the 37% of housing units that are considered residential rental properties. Additional quantifiable benefits are needed beyond energy savings to help further motivate residential property owners to invest in energy efficiency upgrades. This research focuses on assessing the adoption of energy efficient upgrades in U.S. residential housing and the impact on rental prices. Ten U.S. cities are chosen for analysis; these cities vary in size across multiple climate zones, and represent a diverse set of housing market conditions. Data was collected for over 159,000 rental property listings, their characteristics, and their energy efficiency measures listed in rental housing postings across each city. Following an extensive data quality control process, over thirty different types energy efficient features were identified. The level of adoption was determined for each city, ranging from 5.3% to 21.6%. Efficient lighting and appliances were among the most common, with many features doubling as energy efficient and other desirable aesthetic or comfort improvements. Then using propensity score matching and conditional mean comparison methods, the relative impact on rent charged in each city was calculated, which ranged from a 6% to 14.1% increase in rent for properties with energy efficient features, demonstrating a positive economic impact of these features, particularly for property owners. This was further subdivided into five types of energy efficiency upgrade and three housing types. Single family homes generally demanded higher premiums with energy efficient features, however there was not a consistent pattern across the types of efficient upgrades. The results of this work demonstrate that investment in energy efficient technologies has quantifiable benefits for rental property owners in the U.S. beyond just energy savings. This methodology and results can also be used in other cities and by property owners, utility companies, or others, ultimately encouraging further investment and positive economic impact in residential energy efficiency and in turn improving energy and resource conservation in the building sector.

Abstract A new formulation for the evaporation, flashing, condensation processes taking place in the effects of thermal desalination systems which simulates the operation of both forward and parallel/cross configurations is coupled with an exergo-economic model based on the SPECO method. The thermo-economic model uses accurate properties for the seawater, brine, pure water and vapour and is solved with an equation solver which does not require the development of a specific solution algorithm as in most previous studies. This flexible model is used to analyze the influence of the number of effects N and the temperature difference ΔT e between effects on the technical and economic performance of multi-effect desalination systems with ejector vapour compression. In particular, it is shown that the performance calculated by an earlier black-box approach is not attainable by technically and economically realistic systems. It is also shown that for each feed configuration and a given number of effects there exists an optimum value of ΔT e which minimizes the cost of the produced potable water. This last result forms the basis of a procedure that combines black-box results with the optimum value of ΔT e and can be used to select the appropriate system for any specific application.

Abstract This study develops a novel sustainability assessment methodology for energy systems using life-cycle emission factors and sustainability indicators. Here, the global warming and environmental impact dimensions of the sustainability assessment methodology are examined in detail. A comparative analysis shows that a wind-battery system produces fewer potential global warming, stratospheric ozone depletion, air pollution, and water pollution impacts compared to a gas-fired system. The wind-battery system generates 13% of the life-cycle GHG emissions and 22% of the life-cycle ozone-depleting substance emissions of a gas-fired power plant. Nitrous oxide contributes more than 90% of the stratospheric ozone depletion potential of gas-fired and wind-battery systems.

Abstract In developed countries, buildings are involved in almost 50% of total energy use and 30% of global green-house gas emissions. Buildings' operational energy is highly dependent on various building physical, operational, and functional characteristics, as well as meteorological and temporal properties. Besides physics-based building energy modeling, machine learning techniques can provide faster and higher accuracy estimates, given buildings' historic energy consumption data. Looking beyond individual building levels, forecasting buildings’ energy performance helps city and community managers have a better understanding of their future energy needs, and plan for satisfying them more efficiently. Focusing on an urban-scale, this study systematically reviews 70 journal articles, published in the field of building energy performance forecasting between 2015 and 2018. The recent literature have been categorized according to five criteria: 1. Learning Method, 2. Building Type, 3. Energy Type, 4. Input Data, and 5. Time-scale. The scarcity of building energy performance forecasting studies in urban-scale versus individual level is considerable. There is no study incorporating building functionality in terms of space functionality share percentages, nor assessing the effects of climate change on urban buildings energy performance using machine learning approaches and future weather scenarios. There is no optimal criteria combination for achieving the most accurate machine learning-based forecast, as there is no universal measure able to provide such global comparison. Accuracy levels are highly correlated with the characteristics of forecasting problems. The goal is to provide a comprehensive status of machine learning applications in urban building energy performance forecasting, during 2015–2018.

Abstract Kenya has made considerable policy efforts to expand its renewable energy portfolio to meet energy demand and mitigate greenhouse gas (GHG) emissions. Development of proper policies requires a robust framework for analyzing the benefits of renewable energy investments. Towards this end, this study applied a choice experiment analysis to determine how attributes (type of energy, ownership, impact on environment, distance and visibility, community job creation, and yearly renewable energy tax) impact the public willingness to pay for renewable energy development in Kenya. A nationwide survey of 1020 households was conducted in nine counties using conditional logit (MNL) and random parameter logit (RPL) frameworks. The results reveal that the Kenyan public places a high value on environmental impact, followed by type of renewable energy and community job creation, respectively. On the other hand, respondents do not place much emphasis on ownership or distance and visibility. Policy simulation suggests that while renewable energy adoption is highly valued by households, the total willingness to pay is not enough to cover the higher capital cost for the development of various renewable energy technologies.

Integrated assessment models (IAMs) are playing an increasingly important role in long-run sustainability analysis. At their core is a set of global economic and environmental accounts which capture a complete set of inter-industry and inter-regional relationships in the global economy in a consistent manner. While much attention is focused on the raw data and parameterization required to expand or add sectoral detail to IAMs, only rarely is there discussion of how different matrix balancing methods (i.e. translating disparate raw data sources into the consistent database) affect modeling results. This article offers an in-depth look into the database–modeling nexus in IAMs, focusing on the electric power sector which is both a major source of CO2 emissions and a critical vehicle for climate change mitigation. Comparisons of the prevailing matrix balancing algorithms show how the choice of database reconciliation methodology affects modeling results using policy-relevant simulations in the context of the electric power sector. The resulting insights can be applied to the disaggregation of other, technology rich sectors in the economy. We conclude that appropriate selection of database reconciliation methodologies can reduce the deviation between bottom-up and top-down modeling.