• Energy Research
• Closed Access close
• engineering and technology close

Abstract Large-scale cultivation of microalgal biomass in open systems can benefit from the low cost of using natural sunlight, as opposed to artificial light, but may encounter problems with photoinhibition, high evaporation rates, potential contamination and high energy demand. Wavelength selective luminescent solar concentrator (LSC) panels can solve some of these problems when incorporated into low-cost sheltered structures for algal biomass production that concurrently produce their own electricity by harnessing select portions of solar energy, not used for algal growth. The LSC panels in this study contained a fluorescent dye, Lumogen Red 305, which transmits blue and red wavelengths used for photosynthesis with high efficiency, while absorbing the green wavelengths and re-emitting them as red wavelengths. The fluorescently generated red wavelengths are either transmitted to boost algal growth, or waveguided and captured by photovoltaic cells to be converted into electricity. We found that different strains of microalgae (currently used commercially) grew equally well under the altered spectral conditions created by the luminescent panels, compared to growth under the full solar spectrum. Thus this technology presents a new approach wherein algae can be grown under protected, controlled conditions, while the cost of operations is offset by the structure's internal electrical production, without any loss to algal growth rate or achievable biomass density.

Abstract Large-scale cultivation of microalgal biomass in open systems can benefit from the low cost of using natural sunlight, as opposed to artificial light, but may encounter problems with photoinhibition, high evaporation rates, potential contamination and high energy demand. Wavelength selective luminescent solar concentrator (LSC) panels can solve some of these problems when incorporated into low-cost sheltered structures for algal biomass production that concurrently produce their own electricity by harnessing select portions of solar energy, not used for algal growth. The LSC panels in this study contained a fluorescent dye, Lumogen Red 305, which transmits blue and red wavelengths used for photosynthesis with high efficiency, while absorbing the green wavelengths and re-emitting them as red wavelengths. The fluorescently generated red wavelengths are either transmitted to boost algal growth, or waveguided and captured by photovoltaic cells to be converted into electricity. We found that different strains of microalgae (currently used commercially) grew equally well under the altered spectral conditions created by the luminescent panels, compared to growth under the full solar spectrum. Thus this technology presents a new approach wherein algae can be grown under protected, controlled conditions, while the cost of operations is offset by the structure's internal electrical production, without any loss to algal growth rate or achievable biomass density.

This paper presents a procedure of choosing an appropriate surge protective device for low-voltage systems connected to an overhead line. For a typical surge protection application, an appropriate Electromagnetic Transients Program model is devised. The energy overload is calculated for a surge protective device following a simulation of the lightning effect. This way, it is possible to determine the required class for the surge protective device in question. The procedure has been tested on some typical overhead low-voltage networks. The results of these calculations, as well as very good service experiences, demonstrate that the use of Class II surge protective devices seems to be appropriate for service entrances in buildings that have no lightning protection systems.

This paper presents a procedure of choosing an appropriate surge protective device for low-voltage systems connected to an overhead line. For a typical surge protection application, an appropriate Electromagnetic Transients Program model is devised. The energy overload is calculated for a surge protective device following a simulation of the lightning effect. This way, it is possible to determine the required class for the surge protective device in question. The procedure has been tested on some typical overhead low-voltage networks. The results of these calculations, as well as very good service experiences, demonstrate that the use of Class II surge protective devices seems to be appropriate for service entrances in buildings that have no lightning protection systems.

Motor gasoline must present characteristics that guarantee its quality and the good performance of internal combustion engines without harming the environment. The contamination of gasoline by solvents can seriously adulterate its physical-chemical properties and affect its volatility and detonation capacity. To investigate organic solvent adulteration in gasoline samples, thermal analysis technique (TG/DTG) can be used as an auxiliary tool in the study of the thermal behavior of liquid fuels, as demonstrated by the present work involving a comparative analysis of kerosene-free and doped gasoline.

Motor gasoline must present characteristics that guarantee its quality and the good performance of internal combustion engines without harming the environment. The contamination of gasoline by solvents can seriously adulterate its physical-chemical properties and affect its volatility and detonation capacity. To investigate organic solvent adulteration in gasoline samples, thermal analysis technique (TG/DTG) can be used as an auxiliary tool in the study of the thermal behavior of liquid fuels, as demonstrated by the present work involving a comparative analysis of kerosene-free and doped gasoline.

An experimental study on the flow and heat transfer in open vertical enclosures, representing elevator shafts, warehouses, and atriums, due to a building fire is carried out, using a scale model. Smoke and hot gases are injected into the enclosure at a lower opening and the resulting downstream flow and temperature fields are studied. The inlet temperature and flow rate of the hot gases are varied over wide ranges to simulate the flow due to fire in multi-leveled buildings with vertical open shafts or atriums under natural ventilation. The conditions at the outlet, which is located on the same wall as the inlet, are also monitored to determine the effects of entrainment into the flow and heat transfer to the walls. Typical values of the operating conditions have been investigated, ranging from high buoyancy levels, for which the flow stays close to the vertical wall of the enclosure, to much lower levels, at which the flow enters the enclosure with a significant flow velocity and spreads outward very quickly. With increasing temperature at the inlet, the buoyancy effect is larger, resulting in higher velocities and shorter time to reach the top. The measured temperature at the outlet depends on heat transfer to the walls as well as on the flow velocity. Detailed measurements of the velocity and temperature fields have also been taken. It is found that a wall plume is generated which conveys the hot fluid rapidly along the vertical wall containing the inlet and the outlet. A recirculating flow arises away from this wall and this flow affects the heat transfer and flow in the wall plume. This feature, in turn, affects the entrainment into the flow, decay of the temperature level and the evolution of mean flow. Therefore, horizontally uniform conditions cannot be assumed here, as employed in several studies of tall enclosures. The wall plume has to be modeled in this case, considering the entrainment into the boundary layer flow and the effect of the recirculating flow.

An experimental study on the flow and heat transfer in open vertical enclosures, representing elevator shafts, warehouses, and atriums, due to a building fire is carried out, using a scale model. Smoke and hot gases are injected into the enclosure at a lower opening and the resulting downstream flow and temperature fields are studied. The inlet temperature and flow rate of the hot gases are varied over wide ranges to simulate the flow due to fire in multi-leveled buildings with vertical open shafts or atriums under natural ventilation. The conditions at the outlet, which is located on the same wall as the inlet, are also monitored to determine the effects of entrainment into the flow and heat transfer to the walls. Typical values of the operating conditions have been investigated, ranging from high buoyancy levels, for which the flow stays close to the vertical wall of the enclosure, to much lower levels, at which the flow enters the enclosure with a significant flow velocity and spreads outward very quickly. With increasing temperature at the inlet, the buoyancy effect is larger, resulting in higher velocities and shorter time to reach the top. The measured temperature at the outlet depends on heat transfer to the walls as well as on the flow velocity. Detailed measurements of the velocity and temperature fields have also been taken. It is found that a wall plume is generated which conveys the hot fluid rapidly along the vertical wall containing the inlet and the outlet. A recirculating flow arises away from this wall and this flow affects the heat transfer and flow in the wall plume. This feature, in turn, affects the entrainment into the flow, decay of the temperature level and the evolution of mean flow. Therefore, horizontally uniform conditions cannot be assumed here, as employed in several studies of tall enclosures. The wall plume has to be modeled in this case, considering the entrainment into the boundary layer flow and the effect of the recirculating flow.

Low-salinity water injection emerges to be a cost-effective and environmentally friendly enhanced oil recovery technique. Furthermore, additives, such as the surfactant and nanoparticles in combina...