• Energy Research

Accurate characterization and reporting of organic photovoltaic (OPV) device performance reniains one of the important challenges in the field. The large spread among the efficiencies of devices with the same structure reported by different groups is significantly caused by different procedures and equipment used during testing. The presented article addresses this issue by offering a new method of device testing using "suitcase sample" approach combined with outdoor testing that limits the diversity of the equipment, and a strict measurement protocol. A round robin outdoor characterization of roll-to-roll coated OPV cells and modules conducted among 46 laboratories worldwide is presented, where the samples and the testing equipment were integrated in a compact suitcase that served both as a sample transportation tool and as a holder and test equipment during testing. In addition, an internet based coordination was used via plasticphotovoltaics.org that allowed fast and efficient communication among participants and provided a controlled reporting format for the results that eased the analysis of the data. The reported deviations among the laboratories were limited to 5% when compared to the Si reference device integrated in the suitcase and were up to 8% when calculated using the local irradiance data. Therefore, this method offers a fast, cheap and efficient tool for sample sharing and testing that allows conducting outdoor measurements of OPV devices in a reproducible manner. (C) 2014 Elsevier B.V. All rights reserved.

ABSTRACTFlexible organic photovoltaic devices may soon find applications in various fields, such as portable electronics or building‐integrated photovoltaics, occupying market niches that are currently not covered by the prevailing photovoltaic technology based on silicon and other inorganic materials. For these applications, there is an urgent need to replace the commonly used indium tin oxide by transparent and electrically conductive materials that can be processed cost‐effectively by large‐area compatible printing and coating processes. Here, we fabricated P3HT/PCBM organic solar cells with a power conversion efficiency of 3.1% on a flexible, transparent and conductive woven fabric electrode. The electrode is produced by a roll‐to‐roll process and consists of a polymer‐embedded fibre/metal wire grid. Metal wires protrude as little as 5 µm from the electrode plane, providing electrical contact points on a smooth surface suitable for thin film deposition. The use of spatially resolved photocurrent mapping experiments showed a high level of detailed information, with the unexpected indication that there probably exists a maximum in the cell performance versus mesh size opening and that woven fabric electrodes with largest geometrical open area do not necessarily perform better. Copyright © 2012 John Wiley & Sons, Ltd.

Abstract Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfill ambitions for net-zero carbon dioxide equivalent (CO2eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.5 TWp by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the PVs community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other.

Abstract Metastability is a characteristic feature of perovskite solar cell (PSC) devices that affects power rating measurements and general electrical behaviour. In this work the metastability of different types of PSC devices is investigated through current–voltage (I–V) testing and voltage dependent photoluminescence (PL-V) imaging. We show that advanced I–V parameter acquisition methods need to be applied for accurate PSC performance evaluation, and that misleading results can be obtained when using simple fast I–V curves, which can lead to incorrect estimation of cell efficiency. The method, as applied in this work, can also distinguish between metastability and degradation, which is a crucial step towards reporting stabilised efficiencies of PSC devices. PL-V is then used to investigate temporal and spatial PL response at different voltage steps. In addition to the impact on current response, metastability effects are clearly observed in the spatial PL response of different types of PSCs. The results imply that a high density of local defects and non-uniformities leads to increased lateral metastability visible in PL-V measurements, which is directly linked to electrical metastability. This work indicates that existing quantitative PL imaging methods and point-based PL measurements of PSC devices may need to be revisited, as assumptions such as the absence of lateral currents or uniform voltage bias across a cell area may not be valid.

AbstractAccurate temperature measurements of a photovoltaic (PV) device are not always straightforward. Compromises between accuracy and spatial resolution often have to be made to give either quantitative single point measurements or qualitative spatial measurements. Phosphor thermometry is demonstrated in this work to measure the temperature of an encapsulated silicon photovoltaic device with uncertainty less than 1 °C. Comparisons with contact thermocouple probes are made under external white‐light illumination and internal resistive heating. Under similar conditions, phosphor thermal imaging shows less sensitivity to sources of uncertainty such as poor probe positioning and reduced thermal contact, allowing the detection of faults and shunt induced thermal hot spots in encapsulated PV devices with a higher degree of confidence.

Thin films of fullerene C60 and molybdenum oxide (MoO3) are ubiquitously used as the electron acceptor material and hole extraction interfacial layer for the fabrication of organic photovoltaic (OPV) cells. It is well known that light exposure induces color changes in MoO3 (photochromism) and the formation of intermolecular bonds between C60 molecules (photopolymerization). The influence of these photoinduced reactions on the long‐term stability of OPV cells, however, has not previously been studied in detail. Here, a study and discussion of the early (<5 days) aging mechanisms occurring in illuminated ITO/MoO3/organic cyanine dye/C60/Alq3/Ag bilayer solar cells under nitrogen atmosphere is presented. A degradation process at the organic heterojunction is identified and the formation of Mo5+ species during illumination is found to adversely affect cell behavior. For these widely used materials, the results suggest that light processing is a first necessary step before OPV characteristics can be meaningfully rated.