• Energy Research
• Energies close

A thermodynamic model of a combined heat and power (CHP) plant, fed by syngas produced by dry olive pomace gasification is here presented. An experimental study is carried out to inform the proposed model. The plant is designed to produce electric power (200 kWel) and hot-water by using a cogenerative micro gas turbine (micro GT). Before being released, exhausts are used to dry the biomass from 50% to 17% wb. The ChemCad software is used to model the gasification process, and input data to inform the model are taken from experimental tests. The micro GT and cogeneration sections are modeled assuming data from existing commercial plants. The paper analyzes the whole conversion process from wet biomass to heat and power production, reporting energy balances and costs analysis. The investment profitability is assessed in light of the Italian regulations, which include feed-in-tariffs for biomass based electricity generation.

The aim of this study was to analyze the effect of ZnO nanoparticles (ZnO NPs) on the biogas production from mechanically treated barley straw and to perform a techno-economic analysis based on the costs assessment and on the results of biogas production. The structural changes of mechanically pretreated barley straw were observed using FTIR, XRD, TGA, and SEM. Additionally, both green ZnO NPs prepared from red alga (Antithamnion plumula) extract and chemically prepared ZnO NPs were characterized by FTIR, XRD, SEM, and TEM, surface area, and EDX. The results revealed that the biogas production was slightly improved by 14.9 and 13.2% when the barley straw of 0.4 mm was mechanically pretreated with 10 mg/L of both green and chemical ZnO NPs and produced 390.5 mL biogas/g VS and 385 mL biogas/g VS, respectively. On the other hand, the higher concentrations of ZnO NPs equal to 20 mg/L had an inhibitory effect on biogas production and decreased the biogas yield to 173 mL biogas/g VS, which was less than the half of previous values. It was also clear that the mechanically treated barley straw of 0.4 mm size presented a higher biogas yield of about 340 mL/g VS, in comparison to 279 mL biogas/g VS of untreated biomass. The kinetic study showed that the first order, modified Gompertz and logistic function models had the best fit with the experimental data. The results showed that the nanoparticles (NPs) of the mechanically treated barely straw are a suitable source of biomass for biogas production, and its yields are higher than the untreated barley straw. The results of the cost-benefit analysis showed that the average levelized cost of energy (LCOE), adopting the best treatments (0.4 mm + 10 mg/L ZnO), is 0.21 €/kWh, which is not competitive with the other renewable energy systems in the Egyptian energy market.

Italian power generation through anaerobic digestion (AD) has grown significantly between 2009 and 2016, becoming an important renewable energy resource for the country, also thanks to the generous incentives for produced electricity available in the last years. This work focuses on the economic and environmental issues of AD technology and proposes a techno-economic analysis of investment profitability without government support. In particular, the analysis focuses on an AD power plant fed by zootechnical wastewater and agro-industrial residues coupled to a cogeneration (CHP) system and a digestate-composting plant that produces soil fertilizers. We aim to determine the economic profitability of such AD power plants fed by inner-farm biomass wastes, exploiting digestate as fertilizer, using the cogenerated heat and taking into account the externalities (environmental benefits). Environmental analysis was carried out via a life cycle analysis (LCA), and encompassing the production of biogas, heat/electricity and compost in the downstream process. The un-released environmental emissions were converted into economic benefits by means of a stepwise approach. The results indicate that integrating a compost plant with a biogas plant can significantly increase the carbon credits of the process. The results were evaluated by means of a sensitivity analysis, and they report an IRR in the range of 6%–9% according to the Italian legislative support mechanisms, and possibilities to increase revenues with the use of digestate as fertilizer. The results significantly improve when externalities are included.

Wood and agricultural biomass pellets boost the potential as bio-fuels toward power production in tertiary and residential sectors. The production of pellets, however, is a multi-stage process where the supply-processing phases and the overall energy input strongly depend on the characteristics of the input biomass. In this paper, we describe the key features of the market for pellets in Italy, including national production and consumption data, production costs and prices, the available energy conversion systems, and the current regulatory issues. Moreover, we outline the main technical, economic, and end-user barriers that should be addressed in order to foster the growth of Italian pellet production. Additionally, we propose a methodology to evaluate the profitability of the pellet production chain, by assessing the investment and operation costs as a function of the quality of the raw biomass. The approach is applied to a real case study of a small firm producing wooden frames along with dry wood chips as the main by-product, which can be utilized subsequently for pellet production. Moreover, in order to optimize the size of the pellet production plant, further biomass was purchased from the market, including wood pruning and agricultural residues, wood chips from forestry, and uncontaminated residues of wood processing firms. A sensitivity analysis of the main technical and economic parameters (including the cost and quality of raw material, pellet market value, investment and operational costs, and plant lifetime) indicated that the biomass market price considerably affects the profitability of pellet production plants, particularly where the biomass has a high moisture content. Therefore, a 20% increase in the price of biomass with a high moisture content leads to a 60% fall in profitability index, turning it into negative one. This is due in particular to the costs of pre-treatment and drying of biomass, as well as to the lower energy content of wet biomass. As a result, the use of forestry residues with high moisture and high ash content, high costs of collection/transport, and high costs of pre-treatment and drying is not financially competitive.

In this research, a technoeconomic comparison of energy efficiency options for energy districts located in different climatic areas (Naples, Italy and Fayoum, Egypt) is presented. A dynamic simulation model based on TRNSYS is developed to evaluate the different energy efficiency options, which includes different buildings of conceived districts. The TRNSYS model is integrated with the plug-in Google SketchUp TRNSYS3d to estimate the thermal load of the buildings and the temporal variation. The model considers the unsteady state energy balance and includes all the features of the building’s envelope. For the considered climatic zones and for the different energy efficiency measures, primary energy savings, pay back periods and reduced CO2 emissions are evaluated. The proposed energy efficiency options include a district heating system for hot water supply, air-to-air conventional heat pumps for both cooling and space heating of the buildings and the integration of photovoltaic and solar thermal systems. The energy actions are compared to baseline scenarios, where the hot water and space heating demand is satisfied by conventional natural gas boilers, the cooling demand is met by conventional air-to-air vapor compression heat pumps and the electric energy demand is satisfied by the power grid. The simulation results provide valuable guidance for selecting the optimal designs and system configurations, as well as suggest guidelines to policymakers to define decarbonization targets in different scenarios. The scenario of Fayoum offers a savings of 67% in primary energy, but the associated payback period extends to 23 years due to the lower cost of energy in comparison to Naples.

The power system is changing towards a decarbonized one. The Kyoto protocol and the Paris climate agreement have prompted many nations to approve energy policies based on volatile renewable energy sources (RESs). However, the integration into the grid of the power generated by RESs as well as the electrification of the heating, gas and transportation sectors is becoming a huge challenge. Planning industrial and tertiary sites as net-zero energy systems (NZESs) might contribute to advance the solutions of fully integrating volatile RESs into the power system. This study aims to point out the importance of planning large energy consumer sites such as NZESs, and to depict a holistic modeling approach for this. The methodology is based on a multi-layer approach, which focuses on on-site power generation by RESs, on the improvement of energy efficiency, and on the increase of system flexibility. A qualitative case study has been conducted. It considers the planning of a Net-Zero Energy Data Center located in Germany. Results point out that new interdisciplinary and in particular social analysis methods are necessary. They might be used for accelerating the decision making process during the planning of RES-based on-site power generation systems. Besides, for computation and cooling systems, new technologies that are continuously emerging in the market should be taken into account. If well designed, they contribute to significantly decrease the whole energy demand of data center. Finally, optimal sizing of energy storage systems (electric and thermal) as well as an expedient choice of performance indicators to evaluate technology options are identified as the key factor for decreasing the external energy demand of tertiary sites, such as data center.