• Energy Research
• Closed Access close
• Open Source close
• 13. Climate action close
• 6. Clean water close
• Energy close

Abstract To achieve the EU climate and energy objectives, a transition towards a future sustainable energy system is needed. The integration of the huge potential for industrial waste heat recovery into smart energy system represents a main opportunity to accomplish these goals. To successfully implement this strategy, all the several stakeholders' conflicting objectives should be considered. In this paper an evolutionary multi-objective optimization model is developed to perform a sustainability evaluation of an energy system involving an industrial facility as the waste heat source and the neighbourhood as district heating network end users. An Italian case study of heat recovery from a steel casting facility shows how the model allows to properly select the district heating network set of users to fully exploit the available waste energy. Design directions such as the thermal energy storage capacity can be also provided. Moreover, the model enables the analysis of the trade-off between the stakeholders’ different perspectives, allowing to identify possible win-win solutions for both the industrial sector and the citizenship.

Abstract In this study, we develop indices for the overall technical efficiency (OTE) and energy-saving target ratio (ESTR) using data envelopment analysis (DEA) to calculate the relative efficiency and energy-saving potential of 30 provinces in China from 1997 to 2014. The results are as follows: (1) the OTE of China is 79.187%, indicating that there is 20.813% potential for improvement. The OTE exhibits decreasing efficiency values from the coastal areas to the inland areas and has clear geographical relationships. The average values of OTE in the east, midland and west are 0.932, 0.694 and 0.703. Theoretically, the total energy savings of CE, HE, ME and BE are 11080.60PJ, 5124.71PJ, 4729.24PJ and 6797.39PJ. (2) Regarding CE, HE, ME and BE, the provinces with the highest comprehensive ranks are Henan, Shanxi, Shaanxi, and Gansu, which simultaneously have the greatest energy-saving potentials and energy-saving targets. (3) The HE has the largest average ESTR of 38.357% and the values for BE, CE, and ME are 25.759%, 23.874%, and 22.143%, respectively. The CE category is the greatest in total energy savings (40.171%), which is followed by BE (24.150%), HE (18.384%), and ME (17.293%).

Abstract The residential sector accounts for most of energy-consumption in developing countries in the form of traditional energy. The use of commercial energy is nominal and confined mostly to urban areas where fuelwood is already monetized. A model, based on an end-use/process analysis approach, is developed on a spreadsheet, which is capable of simulating scenarios to address issues of increasing traditional energy-demand caused by population growth, sustainable supply capacity of the existing energy resources, potential for development of new and renewable energy resources, technology. This paper is divided into two parts: general energy issues and the modelling approach, and the application of this approach to Nepal in the context of fuelwood-supply sustainability.

Abstract Small-scale hydroelectric plants, primarily run-of-the-river designs, are regularly subjected to hard particle wear and cavitation erosion due to the wide range of operating points. Depending on the severity of the operating conditions and erosion damage experienced by the machine throughout its service life, the operating companies of these facilities will be impacted. The impact will be technical, operational, logistical, and economic. A small-scale generation plant located in Amaime River in Colombia, is one such case, where severe wear occurs in the turbine components, with a consequent reduction of efficiency. In this study, the analysis of the erosion damage has been expanded and supplemented by computational fluid dynamics (CFD). From this approach, correlations between the wear rate and power output were obtained. Likewise and in conjunction with the computer estimates, a methodology to analyse the costs associated with wear based on historical data of operation was developed, creating a strategy of operation based on a stopping criterion that depends primarily on sediment concentration, turbinated flow, and wear level. The methodology optimizes the use of generators, which takes into consideration the revenue generation and the costs associated with operation and maintenance of pieces under conditions of intrinsic erosion wear in the facility.

Abstract For a fixed bed gasifier, coal gas is mainly derived from dry distillation zone and gasification zone. The upstream gas from gasification zone will inevitably affect the composition and production of dry distillation gas. Therefore, the composition of upstream gas and the reaction conditions of dry distillation zone were simulated to perform experiments of Yining coal pyrolysis under a series of atmospheres. Some new discoveries are obtained. H2O and the hydrogen-containing gas have a significant impact on the release of dry distillation gas. H2O inhibits the release of CO, CO2 and CH4, but promotes the release of H2 which is not from char−H2O gasification. When the hydrogen-containing gas passes through dry distillation zone, the path of stabilizing radicals is completely changed, resulting in that coal pyrolysis changes from a process of generating H2 under inert atmosphere to a process of consuming a large amount of H2. In addition, water gas shift reaction is the only homogeneous reaction observed obviously in dry distillation zone, which can promote the production increase of CO2, but can not prevent the production decrease of H2 in coal gas.

Abstract For biomass/waste fueled power plants, stricter regulations require a further reduction of the negative impacts on the environment caused by the release of pollutants and withdrawal of fresh water externally. Flue gas quench (FGQ) is playing an important role in biomass or waste fueled combined heat and power (CHP) plants, as it can link the flue gas (FG) cleaning, energy recovery and wastewater treatment. Enhancing water evaporation can benefit the concentrating of pollutant in the quench water; however, when FG condenser (FGC) is not in use, it results in a large consumption of fresh water. In order to deeply understand the operation of FGQ, a mathematic model was developed and validated against the measurements. Based on simulation results key parameters affecting FGQ have been identified, such as the flow rate and temperature of recycling water and the moisture content of FG. A guideline about how to reduce the discharge of wastewater to the external and the withdrawal of external water can be proposed. The mathematic model was also implemented into an ASPEN Plus model about a CHP plant to assess the impacts of FGQ on CHP. Results show that when the FGC was running, increasing the flow rate and decreasing the temperature of recycling water can result in a lower total energy efficiency.

Abstract Large amounts of heat is wasted through air coolers and water coolers for cooling low temperature ( H ) recovered in the evaporator were 8.0–8.6 MW for ORC using i-pentane as working fluid and 8.2–8.3 MW for Kalina cycle, respectively. Efficiency (η) of selected systems obtained at the highest power generated (W T ) was 10.0% (W T = 862 kW) for ORC and 10.57% (W T = 996 kW) for Kalina cycle within the design boundaries. Calculated carbon dioxide (CO 2 ) emission reduction potential was 2260 t/y for ORC and 2600 t/y for Kalina system, respectively, at advantageous process conditions. Results showed that Kalina cycle provided higher efficiency and power generation ability on expense of higher system pressure (29 bar–7 bar). Economic calculations showed that the payback time is about 5.0 year for both systems.

Abstract This paper gives an experimental investigation of the effect of climatic conditions on the performance and degradation of crystalline silicon photovoltaic modules under Saharan environment in Adrar region in the south of Algeria. The first part of this study is focused on the analysis and assessment of UDTS 50 PV modules degradation after a long term outdoor exposure to these conditions (more than 12 years). The visual inspection of 62 PV modules has allowed to observe and determine the degradation modes such as, EVA discoloration, delamination, busbar corrosion, cracking of solar cell, glass breakage, AR coating and solder bond. The degradation evaluation of three modules with different defects was also performed, using (I-V/P-V) characteristics and the degradation rates of the parameters (Pmax, Imp, Vmp, Isc, Voc, FF) at Standard test conditions (STC) in order to compare with the nominal data delivered by the manufacturer of photovoltaic panels. Finally, the combination of the partial shading effect and the presence of EVA browning defect was examined to assess the changes in I-V and P-V curves caused by the drop in electrical parameters.

The Asia-Pacific region has the most rapidly growing energy demand in the world and will continue to have an increasing impact on world energy demand. Given the heterogeneity of economies in the region, any regional demand analysis has to be constructed country by country. In undertaking the demand forecasts provided in this study, scenarios were developed for high, low, and base cases that take into account variations in economic performance, prices, and fuel substitution in individual nations and in the region as a whole. China is included in the aggregate regional data provided in this article. Data from the countries of the former Soviet Union are not included in the regional totals in this article and are discussed separately in article 4.