• Energy Research
• Restricted close
• Bioresource Technology close

In the present work, the supercritical water gasification (SCWG) of biomass is analyzed with a view to outlining the possible thermodynamic constraints that must be taken into account to develop this new process. In particular, issues concerning the formation of solid carbon and the process heat duty are discussed. The analysis is conducted by means of a two-phase non-stoichiometric thermodynamic model, based on Gibbs free energy minimization. Results show that char formation at equilibrium only occurs at high biomass concentrations, with a strong dependence on biomass composition. As regards the process heat duty, SCWG is mostly endothermic when biomass concentration is low, although a very small amount of oxidizing agent is able to make the process exothermic, with only a small loss in the heating value of the syngas produced.

This work explores the impact of static magnetic field (SMF) intensity on biomethane production from anaerobic digestion (AD) of sewage sludge. Two different SMF intensities (20 mT and 1.5 T) were applied to magnetize the sludge destined to the AD process. The magnetic pretreatment at 20 mT was particularly effective, as it increased biomethane production by 12.7 % compared to the control test. On the contrary, exposing the sludge to 1.5 T adversely affected biomethane production, resulting in a 15.1 % decrease. The positive correlation observed between low-intensity SMF exposure and enhanced biomethane yield, in contrast to the inhibitory effect of high-intensity SMF, suggests the existence of an optimal intensity threshold within the lower range for maximizing methane production. The impact of magnetic pretreatment on the anaerobic microbial community was investigated through high-throughput sequencing analysis of magnetized sludge samples. This approach enabled the identification of specific shifts in microbial populations associated with SMF exposure, thereby elucidating the role of SMF in modulating key microbial communities for the AD process. The findings of this study provide insights into the potential mechanisms underlying these responses and underscore the potential of SMF application for improving the anaerobic valorization of sewage sludge.

Thermo-gravimetric analysis (TGA) was performed on grape seeds, skins, stalks, marc, vine-branches, grape seed oil and grape seeds depleted of their oil. The TGA data was modeled through Gaussian, logistic and Miura-Maki distributed activation energy models (DAEMs) and a simpler two-parameter model. All DAEMs allowed an accurate prediction of the TGA data; however, the Miura-Maki model could not account for the complete range of conversion for some substrates, while the Gaussian and logistic DAEMs suffered from the interrelation between the pre-exponential factor k0 and the mean activation energy E0--an obstacle that can be overcome by fixing the value of k0 a priori. The results confirmed the capabilities of DAEMs but also highlighted some drawbacks in their application to certain thermodegradation experimental data.

Miscanthus is a high yielding bioenergy crop. In this study we used acid presoaking, wet explosion, and enzymatic hydrolysis to evaluate the combination of the different pre-treatment methods for bioethanol production with Miscanthus. Acid presoaking is primarily carried out in order to remove xylose prior to wet explosion. The acid presoaking extracted 63.2% xylose and 5.2% glucose. Direct enzymatic hydrolysis of the presoaked biomass was found to give only low sugar yields of 24-26% glucose. Wet explosion is a pre-treatment method that combines wet-oxidation and steam explosion. The effect of wet explosion on non-presoaked and presoaked Miscanthus was investigated using both atmospheric air and hydrogen peroxide as the oxidizing agent. All wet explosion pre-treatments showed to have a disrupting effect on the lignocellulosic biomass, making the sugars accessible for enzymatic hydrolysis. The combination of presoaking, wet explosion, and enzymatic hydrolysis was found to give the highest sugar yields. The use of atmospheric air gave the highest xylose yield (94.9% xylose, 61.3% glucose), while hydrogen peroxide gave the highest glucose yield (82.4% xylose, 63.7% glucose).

In line with the emerging circular bioeconomy paradigm, the present study investigated the valorisation of abundant hemp biomass residues (HBRs) such as hurds (HH) and a mix of leaves and inflorescences (Mix), and other organic wastes (i.e., cheese whey and grape pomace) through the volatile fatty acid (VFA) production in mono- and co-acidogenic fermentation. The highest VFA yields, measured as acetic acid (HAc) per unit of volatile solids (VS), were obtained with the untreated Mix in mono-fermentation (185 ± 57 mg HAc/g VS) and with the combination of Mix and CW in co-fermentation (651 ± 65 mg HAc/g VS), while the highest HAc percentage reached up to 94% of total VFAs. Finally, a preliminary techno-economic evaluation revealed that the mono-fermentation of alkali pretreated HH could lead to the highest revenues among HBRs, reaching up to 710-1810, 618-1577 and 766-3722 €/ha∙year for the production of HAc, single cell protein and polyhydroxybutyrates, respectively.

Respirometric techniques and an activated sludge model (ASM) were applied for the characterization of tannery wastewater and biomass in a pilot plant membrane bioreactor (MBR) operating at high sludge age. The traditional respirometric tests and the IWA-ASM1 were modified to take into account the specific operating conditions, the solid-liquid separation technology and the wastewater complexity. As a result the wastewater biodegradable COD was fractionated into four components: readily biodegradable, rapidly hydrolysable, slowly hydrolysable and inorganic (due to the presence of reduced sulphur compounds). The kinetic and stoichiometric parameters of the biomass (heterotrophic and nitrifying) were estimated through the integration of model simulations and respirometric tests results. In particular the ammonium and nitrite-oxidizing biomasses were separately characterized: the growth kinetics of ammonium and nitrite-oxidizing bacteria resulted noticeably lower than the traditional reference values (mu(max,AOB)=0.25d(-1)e mu(max,NOB)=0.23d(-1) at 20 degrees C, respectively). The ASM was finally used to confirm that the results of the wastewater and biomass characterization allow to properly simulate the mixed liquor suspended solids in the MBR pilot plant and the COD concentration in the effluent.

Algae are an interesting feedstock for producing biofuel via hydrothermal liquefaction (HTL), due to their high water content. In this study, algae slurries (5-7 wt% daf) from different species were liquefied at 250 and 375 °C in batch autoclaves during 5 min. The aim was to analyze the influence of strain-specific parameters (cell structure, biochemical composition and growth environment) on the HTL process. Results show big variations in the biocrude oil yield within species at 250 °C (from 17.6 to 44.8 wt%). At 375 °C, these differences become less significant (from 45.6 to 58.1 wt%). An appropriate characterization of feedstock appeared to be critical to interpret the results. If a high conversion of microalgae-to-biocrude is pursued, near critical conditions are required, with Scenedesmus almeriensis (freshwater) and Nannochloropsis gaditana (marine) leading to the biocrude oils with lower nitrogen content from each growth environment.

An innovative approach was developed by incorporating high-pressure CO2 into the separate hydrolysis-fermentation of aspen leftover branches, aiming to enhance the bioethanol production efficiency. The high-pressure CO2 significantly increased the 72-h enzymatic hydrolysis yield of converting aspen into glucose from 53.8% to 82.9%. The hydrolysis process was performed with low enzyme loading (10 FPU g-1 glucan) with the aim of reducing the cost of fuel bioethanol production. The ethanol yield from fermentation of the hydrolyzed glucose using yeast (Saccharomyces cerevisiae) was 8.7 g L-1, showing increment of 10% compared with the glucose control. Techno-economic analysis indicated that the energy consumption of fuel bioethanol production from aspen branch chips was reduced by 35% and the production cost was cut 44% to 0.615 USD L-1, when 68 atm CO2 was introduced into the process. These results furtherly emphasized the low carbon footprint of this sustainable energy production approach.