• Energy Research
• 2016-2025close
• 7. Clean energy close
• Applied Energy close

Abstract Adsorbent-based carbon capture is only feasible if adsorption-desorption cycles are both fully regenerating and efficient. This work proposes a regenerative pH swing process and a pH swing regenerative adsorbent that are inspired by natural CO2 conversion by carbonic anhydrase biocatalysts found in mammalian red blood cells. The main objective is to develop, test and analyze a synthetic pH Swing Adsorption (pHSA) system as well as a pHSA compatible solid adsorbent to capture CO2 from a simulated ambient air gas stream. The lead developed adsorbent is a carbon black co-activated with potassium carbonate and nitrogenous copolymer that is impregnated with immobilized bovine carbonic anhydrase and thereby deemed “BCA/KN-CB”. BCA/KN-CB has preliminarily demonstrated both competitive CO2 adsorption capacity and limited regenerative ability under experimental pHSA conditions. In addition, BCA-based adsorbents achieved higher adsorption capacities than non-BCA adsorbent counterparts. The BCA/KN-CB adsorbent displayed both large point of zero charge (PZC) swings and regenerative stability. The proposed pHSA system requires essentially zero energy expenditure to achieve intended environments for capture and regeneration. With 1 kg of adsorbent, pHSA has the ability to capture 1 kg CO2 in less than 4 h of cycling. The tested pHSA adsorbent can also capture more than 96% of total CO2 in a given raw gas stream flowing through the capture chamber. This proof-of-concept study of a pH swing adsorption/biocatalytic adsorbent system suggests the potential to effectively operate under ambient conditions and exhibit advantageous operational efficiencies to other high-profile CO2 capture systems.

Abstract For 118 million residential housing units in the U.S., there is currently a gap between the potential energy savings that can be achieved through the use of existing energy efficiency technologies, and the actual level of energy savings realized, particularly for the 37% of housing units that are considered residential rental properties. Additional quantifiable benefits are needed beyond energy savings to help further motivate residential property owners to invest in energy efficiency upgrades. This research focuses on assessing the adoption of energy efficient upgrades in U.S. residential housing and the impact on rental prices. Ten U.S. cities are chosen for analysis; these cities vary in size across multiple climate zones, and represent a diverse set of housing market conditions. Data was collected for over 159,000 rental property listings, their characteristics, and their energy efficiency measures listed in rental housing postings across each city. Following an extensive data quality control process, over thirty different types energy efficient features were identified. The level of adoption was determined for each city, ranging from 5.3% to 21.6%. Efficient lighting and appliances were among the most common, with many features doubling as energy efficient and other desirable aesthetic or comfort improvements. Then using propensity score matching and conditional mean comparison methods, the relative impact on rent charged in each city was calculated, which ranged from a 6% to 14.1% increase in rent for properties with energy efficient features, demonstrating a positive economic impact of these features, particularly for property owners. This was further subdivided into five types of energy efficiency upgrade and three housing types. Single family homes generally demanded higher premiums with energy efficient features, however there was not a consistent pattern across the types of efficient upgrades. The results of this work demonstrate that investment in energy efficient technologies has quantifiable benefits for rental property owners in the U.S. beyond just energy savings. This methodology and results can also be used in other cities and by property owners, utility companies, or others, ultimately encouraging further investment and positive economic impact in residential energy efficiency and in turn improving energy and resource conservation in the building sector.

Interconnectivity and interoperability are very important features in the development of integrated energy management systems for industrial facilities. A simple and common strategy for exchanging energy-related information among the entities in a facility is currently lacking. To this end, the purpose of this study is to present an IoT-based communication framework with a common information model to facilitate the development of a demand response (DR) energy management system for industrial customers. Additionally, we developed and implemented an IoT-based energy-management platform based on a common information model and open communication protocols, which takes advantage of integrated energy supply networks to deploy DR energy management in an industrial facility. The experimental results of this study demonstrate that the proposed platform can not only improve the interconnectivity of the entities in industrial energy management systems but also reduce the energy costs of industrial facilities.

Abstract Accurate estimation of the remaining useful life of lithium-ion batteries is critically important for electronic devices. In the existing literature, the widely applied model-based approaches for remaining useful battery life estimation are limited by the complexity of the electrochemical modeling required. In addition, data-driven approaches for remaining useful battery life estimation commonly define unreliable sliding window sizes empirically and the prediction accuracy of these approaches needs to be improved. To address the above issues, use of a hybrid neural network with the false nearest neighbors method is proposed in this paper. First, the false nearest neighbors method is used to calculate the sliding window size required for prediction. Second, a hybrid neural network that combines the advantages of a convolutional neural network with those of long short-term memory is designed for model training and prediction. Remaining useful life prediction experiments for batteries with various rated capacities are performed to verify the effectiveness of the proposed approach, and the results demonstrate that the proposed approach offers wide generality and reduced errors when compared with the other state-of-the-art methods.

Abstract Energy harvesting in natural environment has attracted a great deal of attention to generate stable and continuous electrical energy. In this work, we proposed an advanced pyroelectric energy harvesting system by using form-stable phase change material (PCM) composites. The PCM composite connected pyro-electrode generated electrical polarization due to the change of external environment. Polyethylene glycol (PEG) and 1-tetradecanol (1-TD) composites with different phase transition field induced the temperature difference during light-on/-off process. Poly(vinylidene difluoride) (PVDF) was utilized for pyroelectric energy harvesting. The PVDF based pyro-electrode was applied changing the conditions of solar light irradiation and heat air flow. The PCM composites controlled the temperature fluctuation effectively and generated stable output electrical voltage and current. Numerical simulation was carried out to provided in-depth insight into the underlying physics of the system. We envisage that the developed thermal energy harvesting system can pave a way towards high-throughput and sustainable energy harvesting.

Abstract Two office layouts with high and low levels of thermal control were compared, respectively traditional cellular and contemporary open plan offices. The traditional Norwegian practice provided every user with control over a window, blinds, door, and the ability to adjust heating and cooling. Occupants were expected to control their thermal environment to find their own comfort, while air conditioning was operating in the background to ensure the indoor air quality. In contrast, in the British open plan office, limited thermal control was provided through openable windows and blinds only for occupants seated around the perimeter of the building. Centrally operated displacement ventilation was the main thermal control system. Users’ perception of thermal environment was recorded through survey questionnaires, empirical building performance through environmental measurements and thermal control through semi-structured interviews. The Norwegian office had 35% higher user satisfaction and 20% higher user comfort compared to the British open plan office. However, the energy consumption in the British practice was within the benchmark and much lower than the Norwegian office. Overall, a balance between thermal comfort and energy efficiency is required, as either extreme poses difficulties for the other.

Abstract Hydrothermal treatment (HT) is one of the efficient approaches for upgrading municipal solid waste (MSW). In the present study, emission characteristics of polycyclic aromatic hydrocarbons (PAHs) from hydrothermally treated municipal solid waste (H-MSW) combustion alone and H-MSW/coal co-combustion were investigated at different temperatures. The results showed that for all fuel combustion, the majority of PAHs were 3- or 4-ring PAHs. In addition, flue gas had the highest yields of PAHs followed by fly ash and bottom ash, while the ring number of dominated PAHs in fly ash was higher than those in flue gas and bottom ash. Compared to MSW, H-MSW combustion generated less PAHs at the value of 1131.95–7649.24 μg/g. The blending of H-MSW and coal reduced total PAH emissions and positive interactions were observed between H-MSW and coal during co-combustion. The toxicity equivalent quantity (TEQ) values of the PAHs from combustion were in the order MSW > H-MSW > H-MSW/coal, which was consistent with the total PAH emissions. The present study illustrated that significant reduction of PAH emissions and toxicity from combustion could be achieved by HT and the blending of H-MSW and coal.

It is conventionally believed that there are no self-sustained thermoacoustic oscillations in the absence of acoustic modes in combustors. However, such oscillations (also known as intrinsic thermoacoustic instability) are recently found to occur in a premixed combustor with a mean flow present but no acoustic eigenmodes involved. Practical combustors are associated with entropy waves, pressure jump and mean flow, which are ignored in previous studies without justification. In this work, an entropy-involved energy measure is defined and used to study the stability behaviors of intrinsic thermoacoustic modes. The concepts and methods are exemplified with the classical time-delay n–τ unsteady heat release model. The intrinsic thermoacoustic eigenmodes are found to be related to not only a flame transfer/describing function but also the acoustic impedance at the flame, which is boundary-dependent. It is shown that the predicted frequency ωfr of the intrinsic modes and the critical gain nc depend on the ratio T¯2/T¯1 between the after- and before-combustion temperatures and the inlet mean flow Mach number M¯1. Comparison is then made between the present results and those available in literature. Good agreement is obtained for ωfr. Furthermore, the predicted stability of intrinsic modes based on calculated nc is found to agree well with direct numerical simulations (DNS). It is also interesting to show that as T¯2/T¯1→1, the critical gain as predicted from the previous models is nc→+∞, which means that all intrinsic eigenmodes are stable. However, the present works shows that nc→1.0. Further illustration is then performed by conducting case studies of measured flame transfer and describing functions in premixed combustors. The present work opens up an alternative but more applicable way to study intrinsic thermoacoustic oscillations via the entropy-involved energy measure.

Abstract This study presents a detailed kinetic investigation into ultra-rich oxidation of H 2 S-CH 4 under high temperature (900–1250 °C) and ambient pressure. Effects of temperature, initial H 2 S/CH 4 ratio and equivalence ratio (Φ) on reactants conversions and products distributions were experimentally studied in a tubular flow reactor and kinetically analyzed by CHEMKIN software. A detailed kinetic mechanism involving 85 species and 515 reactions has been developed and validated using reference data for H 2 S-CH 4 decomposition and results from extended experimental conditions involving the O 2 addition. For H 2 S-CH 4 system, conversion of H 2 S increased steady with the rising temperature while reactivity of CH 4 was weak at temperature below 1000 °C. At temperature higher than 1000 °C, conversion of CH 4 increased rapidly and devoted further formation of H 2 and CS 2 mainly via reacting with H 2 S decomposition products. The H 2 production efficiency was negatively associated with initial H 2 S fraction as H 2 S decomposition was dominant H 2 source within 1150 °C. The stoichiometric ratio for H 2 S/CH 4 merely showed its advantage in H 2 production at higher temperature under which CH 4 reached its equilibrium conversion swiftly. Introduction of little amount of O 2 (Φ = 6 or higher) accelerated the whole reaction process and triggered H 2 S partial oxidation and H 2 formation at lower temperature. CH 4 explicitly showed inferior position in oxidation competition with H 2 S and maintained poor conversion at temperature below 950 °C. The results of rate of production (ROP) analysis at condition without O 2 showed that CH 4 reactivity showed dependence on free S radical via S + CH 4 = SH + CH 3 , and the formed CH 3 was mainly converted via reacting with SH and H radicals. CH 3 could be concurrently reverted to CH 4 via reactions with H 2 S and H 2 . O 2 activated the whole system by forming chain branching radicals O and OH. These radicals promoted H 2 S and CH 4 conversions to form richer S, H and CH 3 radicals. SH + CS = CS 2 + H was important for CS 2 formation and with presence of O 2 , CS 2 was likely to be consumed via oxidation reactions. Finally reaction pathways for H 2 S, CH 4 conversion and H 2 , CS 2 formation were presented.