• Energy Research
• Embargo close
• EU close
• FR close

Abstract With drastic fossil fuel depletion and environmental deterioration concerns, a move towards a more sustainable bioenergy-based economy is essential. Lately, the application of microwave (MW) irradiation for waste processing has been attracting interest globally. MW-assisted heating possesses several advantages such as the provision of high microwave energy into dielectric materials with deeper penetration for internal heat generation, showing beneficial features in improving the heating rate and reducing the reaction time. Consequently, the most recent literature regarding the applications of MW-assisted heating for biomass pretreatment as well as biofuel and bioenergy production was reviewed and consolidated in this study. An impressive increase in the product yield and improvement of the product properties are reported, with the use of MW-assisted heating in several conversion routes to produce biofuels. Despite being a promising technology for biofuel production, some major fundamental data of MW-assisted heating have not been comprehensively identified. Therefore, the feasibility of this technology for large-scale implementation is still subpar. Understanding the interaction between the feedstock and the microwave electromagnetic field, and the optimization of several operational and mechanical parameters are the two main keystones that would propel the industrialization of MW heating in the near future. This provides key insights leading to increased feasibility and more advanced application of MW heating.

Silicon carbide/silicon rich carbide multilayers, aimed at the formation of silicon nanodots for photovoltaic applications, have been studied. The electrical properties have been investigated at the nano-scale by conductive Atomic Force Microscopy (c-AFM) and at macro-scale by temperature dependent conductivity measurements. The mixture is composed of highly conductive Si nanoclusters and moderately conductive SiC nanoclusters in a disordered matrix. The conduction mechanism takes place via band states induced by the disorder at the interface between nanodot clusters. Structural properties have been extracted by optical spectroscopy analyses. The results contribute to the understanding of the microscopical electronic mechanisms of the composite material, which is a candidate for third generation photovoltaics.

Abstract The effect of high temperatures as a degrading factor of rock materials is investigated in this study. Valdieri Marble samples, collected in a quarry in North-western Italian Alps, were subjected to thermal cycles (ranging from 105° to 600 °C) and to subsequent non-destructive and destructive laboratory tests with the aim of evaluating the variation of physical and mechanical properties as a function of temperature variations. Physical and mechanical measurements were complemented with microscopic observations on thin sections. The increase of crack density with temperature and the consequent porosity increases were found to be the main causes of degradation of physical and mechanical properties. In general, density, ultrasonic pulse velocity, wet electrical resistivity, uniaxial compressive strength and Young's moduli decrease as temperature increases. By contrast, peak strain and porosity increase. Correlations between temperature and physical-mechanical properties were proposed and compared to other relationships already established in scientific literature. A damage parameter to quantify the degradation of mechanical properties with temperature is also proposed.

Abstract We focused on the production of docosahexaenoic acid (DHA)-containing microbial lipids by Aurantiochytrium sp. using of defatted soybean (DS) as a nitrogen source. Defatted soybean is a plant biomass that could provide a sustainable supply at a low cost. Results showed that Aurantiochytrium sp. could not directly assimilate the DS as a nitrogen source but could grow well in a medium containing DS fermented with rice malt. When cultivated in a fermented DS (FDS) medium, Aurantiochytrium sp. showed vigorous growth with the addition of sufficient sulfate and chloride ions as inorganic nutrients without seawater salt. A novel isolated Aurantiochytrium sp. 6-2 showed 15.8 ± 3.4 g/L DHA productivity (in 54.8 ± 12.1 g/L total fatty acid production) in 1 L of the FDS medium. Therefore, DHA produced by Aurantiochytrium sp. using FDS enables a stable and sustainable DHA supply and could be an alternative source of natural DHA derived from fish oil.

Synopsis The biological structures that fill the environment around us are derived from materials produced by organisms. These biological materials are key to the mechanical function of organisms. The pathways and growth processes that produce biological materials can influence the mechanical properties of the materials, which can in turn shape the higher level function of the system into which the materials are incorporated. Characterizing a biological system requires thorough knowledge of the underlying materials, including their mechanical function, diversity, evolution, and sensitivity to the environment. Anthropogenic activity is driving rapid and widespread changes to the natural environment and global climate, which are influencing organismal growth and physiology in myriad ways. Here, we briefly introduce a collection of articles that focus on the intersection of anthropogenic activity and the mechanical function of biological materials, as part of the “Global Change in a Material World” bundle for Integrative and Comparative Biology. In addition, we provide an analysis of the current scientific literature in this field, highlighting an urgent need to better understand how changes to our world, driven by human activity, are influencing the fundamental architecture and mechanical performance of organisms across the globe.

The optical and photovoltaic properties of Si NCs / SiC multilayers (MLs) are investigated using a membrane-based solar cell structure. By removing the Si substrate in the active cell area, the MLs are studied without any bulk Si substrate contribution. The occurrence is confirmed by scanning electron microscopy and light-beam induced current mapping . Optical characterization combined with simulations allows us to determine the absorption within the ML absorber layer, isolated from the other cell stack layers. The results indicate that the absorption at wavelengths longer than 800 nm is only due to the SiC matrix. The measured short-circuit current is significantly lower than that theoretically obtained from absorption within the ML absorber, which is ascribed to losses that limit carrier extraction. The origin of these losses is discussed in terms of the material regions where recombination takes place. Our results indicate that carrier extraction is most efficient from the Si NCs themselves, whereas recombination is strongest in SiC and residual a-Si domains . Together with the observed onset of the external quantum efficiency (EQE) at 700-800 nm, this fact is an evidence of quantum confinement in Si NCs embedded in SiC on device level.

The production of charcoal for its many uses requires a careful selection of biomass and pyrolysis conditions, especially temperature, to ensure suitable quality. To do so, physical, chemical, and mechanical energy must be considered. This study aimed to analyze the yields and properties of charcoal produced at different pyrolysis temperatures. Eucalyptus saligna wood was pyrolyzed in a reactor with final temperatures of 450, 550, 650, 750, 850 and 950 °C. The yields of charcoal, pyroligneous liquid and non-condensable gases were determined. Mass loss was determined for each temperature. Charcoal analysis included the determination of the apparent density, proximate analysis, heating value, mechanical strength, X-ray images for the internal visualization of its structure and hygroscopicity test. Relevant charcoal properties for the steel industry and barbecue, such as density, mechanical strength, heating value and hygroscopicity, show variable trends from pyrolysis at 650 °C. The results show that pyrolysis temperature had a great impact on the properties of charcoal. The apparent density of charcoal rose from 500 °C and had no relation to the breaking strength. When the pyrolysis temperature was raised, an increase in both apparent and true densities, internal fissures and cracks and fixed carbon content of charcoal was observed.

The use of graphene as transparent conducting layer in devices that require high temperature processing is proposed. The material shows stability upon thermal treatments up to 1100 °C ifc apped with a sacrificial silicon layer. The use of Cu foil or evaporated Cu as catalysts in Catalytic-Chemical Vapor Deposition growth gives rise to graphene ofs imilar properties, which represents a promising result in view of its direct integration in microelectronic devices. Photovoltaic p-i-n thin film devices were fab- ricated on the as-deposited or annealed graphene membranes and compared with similar devices that incorporate as-deposited Indium Tin Oxide. No degradation in series resistance is observed for the annealed device. A 3.7% and 2.8% photovoltaic conversion efficiency is observed on the devices fabricated on as-transferred and on annealed graphene respectively. The major limitation derives from the high sheet resistance of the as-transferred state-of-the-art material. The results opens the way to the use of graphene in applications that require transparent conducting layers resistant to high temperature pro- cessing.