• Energy Research
• Closed Access close
• Restricted close
• US close
• GB close

For zero‐defect wave soldering of double‐sided and multilayer printed circuit boards, the copper through‐hole‐plating must be impervious to gas generated in the laminate for the period of a few seconds while the solder is molten. The kinetics of the gas evolution during soldering have been related quantitatively to the integrity of the plated copper. This in turn is related to the quality of the electroless copper (evaluated using the backlighting test), the nature and distribution of the catalyst (evaluated using X‐ray photoelectron spectroscopy) and the methods and effectiveness of the hole‐wall preparation (evaluated using scanning electron microscopy). The relevance of laboratory measurements has been confirmed on a wide range of industrial production plating lines.

Abstract Gas-insulated systems are now a major component of power transmission and distribution systems all over the world. There has been considerable interest in non-thermal discharges over the past decade due to the increased number of industrial applications. Diverse applications demand a solid physical and chemical understanding of the operational principals of such discharges. This paper focuses on the most important and widely used variety of non-thermal discharges, the corona discharge. Positive corona in SF6 is studied for a point to plane electrode gap using Monte Carlo simulation technique. The initiation and development of successive avalanches are traced as function of time. The simulation provides a detailed structure of avalanches from which essential properties of corona discharge with regard to total field distribution, propagation of successive avalanches and ion distribution can be discerned.

This paper studied the influence of transformer inrush current on commutation failure prevention control of Ultra-high voltage DC (UHVDC) transmission system. An actual event occurred on Tianzhong UHVDC transmission project was analyzed with data from fault recorder. UHVDC transmission model with commutation failure prevention control was established in PSCAD/EMTDC, and then it was applied to replay the event. It is found that the frequent maloperation of commutation failure control and the fluctuation of DC power exist when inrush current occurred. An improved commutation failure prevention control strategy was proposed to avoid this phenomenon. Validity of the improved method was proved by the simulation results.

AbstractA novel multifunctional conjugated polymer (RCP‐1) composed of an electron‐donating backbone (carbazole) and an electron‐accepting side chain (cyanoacetic acid) connected through conjugated vinylene and terthiophene has been synthesized and tested as a photosensitizer in two major molecule‐based solar cells, namely dye sensitized solar cells (DSSCs) and organic photovoltaic cells (OPVs). Promising initial results on overall power conversion efficiencies of 4.11% and 1.04% are obtained from the basic structure of DSSCs and OPVs based on RCP‐1, respectively. The well‐defined donor (D)‐acceptor (A) structure of RCP‐1 has made it possible, for the first time, to reach over 4% of power conversion efficiency in DSSCs with an organic polymer sensitizer and good operation stability.

Abstract An international workshop was held in Richland, Washington, United States of America, in October, 1980 to discuss progress on development of the acid digestion process for treating combustible nuclear waste. The workshop was attended by participants from nine member countries of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA). The status of the acid digestion development programs of various countries is discussed in this paper. The acid digestion process has been developed and demonstrated on an engineering scale in several countries and appears to be especially applicable to treatment of combustible wastes containing high levels of transuranic contamination, where there is potential for recovering the transuranic radionuclides. Because the process takes place at a relatively low temperature, the plutonium contained in the residue is in a form that can be readily recovered using standard leaching techniques. The process is adaptable to a wide variety of combustible wastes, such as cellulosics, plastics, rubber materials, and ion exchange resin. While the process has been developed and demonstrated on an engineering scale primarily for transuranic contaminated wastes, the process is also adaptable to beta-gamma wastes such as reactor ion exchange resins.

Abstract Two office layouts with high and low levels of thermal control were compared, respectively traditional cellular and contemporary open plan offices. The traditional Norwegian practice provided every user with control over a window, blinds, door, and the ability to adjust heating and cooling. Occupants were expected to control their thermal environment to find their own comfort, while air conditioning was operating in the background to ensure the indoor air quality. In contrast, in the British open plan office, limited thermal control was provided through openable windows and blinds only for occupants seated around the perimeter of the building. Centrally operated displacement ventilation was the main thermal control system. Users’ perception of thermal environment was recorded through survey questionnaires, empirical building performance through environmental measurements and thermal control through semi-structured interviews. The Norwegian office had 35% higher user satisfaction and 20% higher user comfort compared to the British open plan office. However, the energy consumption in the British practice was within the benchmark and much lower than the Norwegian office. Overall, a balance between thermal comfort and energy efficiency is required, as either extreme poses difficulties for the other.

In large polymer electrolyte membrane (PEM) fuel cell stacks, monitoring and control of the local changes in membrane humidity inside the cathode channel is critical. In this study, a control-oriented dynamic model capable of describing the spatial distribution of voltage and relative humidity (RH) in a large fuel cell stack is developed and experimentally validated. The model tracks energy and mass flow inside the cathode, anode, and coolant channels, as well as the fuel cell stack body. Validation tests show that the model agrees well with the experimental data. The new modeling framework developed in this study can be used to predict the localized effects of humidity on the performance of a fuel cell stack. Also, given its accurate prediction of RH in the stack, this model can be used as an observer to predict local humidity variations that are, otherwise, not available. This capability would allow PEM fuel cells to avoid membrane damage due to low operating humidities as well as efficiency losses due to catalyst layer flooding.

C57BL/6J mice showed dose dependent devreases in locomotor activity with increasing IP doses of ethanol (0.0, 0.75, 1.50 and 2.25 g/kg), while BALB/cJ mice showed dose dependent increases in activity; both strains were equally active with saline. Whether this finding represents decreased CNS responsivity in C57BL mice to ethanol's excitatory effect or increased response to its depressant action at sub-hypnotic doses is unclear, since anesthetic doses produce anesthesia of far shorter duration in the C57BL strain than in the BALB strain. It is possible that the biphasic action of alcohol is under the control of separate and distinct mechanisms, rather than a common one, and that these two mechanisms are differentially affected by alcohol. Endogenous as well as ethanol-induced neurochemical differences in biogenic amines may also be correlated with the gentic variation in CNS responsivity towards alcohol.

Abstract This paper describes a computer simulation model constructed in the summer of 2000. It was used to simulate the general patterns of power plant construction that might appear in an electric system with approximately the same loads, resources and markets as those in California. The paper begins with background on restructuring in California and a review of previous research on construction. The paper then describes the computer model by presenting several simulations with qualitatively different patterns of construction. The simulations reveal that construction could appear in a steady, even fashion, causing power plants to come on line exactly in time to meet the profitability goals of investors. But this is not the dominant pattern. The more likely pattern shows construction lagging behind the growth in demand, allowing prices to climb to surprisingly high values during peak periods in the summer. When new power plants are completed, they come on line in great numbers causing a bust in wholesale prices. The boom/bust pattern of construction is common in industries such as commodities and real estate, and there are good reasons to believe that a boom could appear in the electric industry. Electricity consumers would certainly benefit from a boom in construction. Unfortunately, waiting for the boom is a difficult challenge with the current mix of state and federal rules in California. The paper concludes with a summary of recent events that have led to the demise of the California approach to deregulation and to the state's entry into the power business.