• Energy Research
• Restricted close
• Embargo close
• other engineering and technologies close
• 12. Responsible consumption close
• 6. Clean water close
• 9. Industry and infrastructure close

Abstract This paper examines the effects of foreign trade and foreign direct investment (FDI) on CO 2 emissions in Turkey. We consider linear and nonlinear ARDL models and find significant asymmetric effects of exports, imports and FDI on CO 2 emissions per capita. However, FDI has no statistically significant long-run effects. In the long run, decreases in exports reduce CO 2 emissions per capita but increases in exports have no statistically significant effects. Increases in imports push up CO 2 emissions per capita, while decreases in imports have no long-run effects. On the other hand, CO 2 intensity, which measures CO 2 emissions per unit of energy, is not influenced by exports and imports, nor by FDI. Instead, it is affected positively by financial development and urbanization. Also, we find that an environmental Kuznets curve is present for both CO 2 measures so that increases in real GDP per capita have led to reductions in CO 2 emissions for at least the most recent decade, controlling for other confounding factors. Furthermore, the sectoral shares of CO 2 emissions in total CO 2 emissions change asymmetrically with foreign trade for two of four sectors, with export increases leading to lower CO 2 shares and imports having the opposite effect.

The design and assessment of net-zero buildings commonly focus exclusively on the operational phase, ignoring the embodied environmental impacts over the building life cycle. An analysis is presented on the consequences of integrating embodied impacts into the assessment of the environmental advantageousness of net-zero concepts. Fundamental issues needing consideration in the design process - based on the evaluation of primary energy use and related greenhouse gas emissions - are examined by comparing three net-zero building design and assessment cases: (1) no embodied impacts included, net balance limited to the operation stage only; (2) embodied impacts included but evaluated separately from the operation stage; and (3) embodied impacts included with the operation stage in a life cycle approach. A review of recent developments in research, standardization activities and design practice and the presentation of a case study of a residential building in Norway highlight the critical importance of performance indicator definitions and system boundaries. A practical checklist is presented to guide the process of incorporating embodied impacts across the building life cycle phases in net-zero design. Its implications are considered on overall environmental impact assessment of buildings. Research and development challenges, as well as recommendations for designers and other stakeholders, are identified.

The building and construction sector is a large contributor to anthropogenic greenhouse gas emissions and consumes vast natural resources. Improvements in this sector are of fundamental importance for national and global targets to combat climate change. In this context, vertical greenery systems (VGS) in buildings have become popular in urban areas to restore green space in cities and be an adaptation strategy for challenges such as climate change. However, only a small amount of knowledge is available on the different VGS environmental impacts. This paper discusses a comparative life cycle assessment (LCA) between a building with green walls, a building with green facades and a reference building without any greenery system in the continental Mediterranean climate. This life cycle assessment is carried according to ISO 14040/44 using ReCiPe and GWP indicators. Moreover, this study fills this gap by thoroughly tracking and quantifying all impacts in all phases of the building life cycle related to the manufacturing and construction stage, maintenance, use stage (operational energy use experimentally tested), and final disposal. The adopted functional unit is the square meter of the facade. Results showed that the operational stage had the highest impact contributing by up to 90% of the total environmental impacts during its 50 years life cycle. Moreover, when considering VGS, there is an annual reduction of about 1% in the environmental burdens. However, in summer, the reduction is almost 50%. Finally, if the use stage is excluded, the manufacturing and the maintenance stage are the most significant contributors, especially in the green wall system.

Artículos en revistas Liberalization policies, the challenges of integrating distributed generation resources, and the recent flattening of electricity demand due to the economic crisis and technological change have led to lower returns for European electricity suppliers. Innovative and sustainable business models are needed to serve electricity customers while reflecting the operational needs of the system and maintaining supplier financial viability. This paper describes a novel model of Integrated Energy Services that encompasses distributed generation (DG) and demand response (DR) resources for industrial customers. We further reflect on some of the market opportunities and regulatory drivers for the development of similar schemes across Europe. info:eu-repo/semantics/publishedVersion

A Life Cycle Assessment (LCA) with focus on carbon footprint, followed by Life Cycle Costing (LCC) of municipal solid waste (MSW) management were conducted in a residential area of a medium-sized European city of 80,000 inhabitants. The initial results showed high environmental impacts and lack of economic sustainability, due to the high amounts of waste landfilled, the low extent of separate collection, low performance of mechanical-biological treatment as well as absence from alternatives to landfilling of non-recyclable materials. Taking this result as a baseline scenario, three improvement.s were tested with the aim of turning the carbon footprint of the local MSW management system into a neutral value: (i) increased separate collection of recyclables, (ii) enhanced biogas production and (iii) refuse-derived fuel (RDF) production. Successively adding the improvements, three alternative improved scenarios were defined, until reaching a negative carbon footprint, meaning that an optimised system would avoid GHG emissions. The proposed changes were sufficient to achieve carbon neutrality, as well as reduce overall environmental impacts, but were not enough for achieving economic sustainability due to the great influence of collection costs, especially for separate collection. It was concluded that by using an adequate combination of several treatment options and increasing the separate collection of recyclable materials it is possible to turn MSW management into a carbon neutral activity as well as improve its economic balance.

Abstract In the last years, electric vehicles (EVs) are getting significant consideration as an environmental-sustainable and cost-effective alternative over conventional vehicles with internal combustion engines (ICEs), for the mitigation of the dependence from fossil fuels and for reduction of Green-House Gasses (GHGs) emission. However, many challenges are still ongoing to their large scale implementation. Among them, the negative impact on the electrical grid operation in case of an uncoordinated contemporary charging of a huge number of EVs. In the recent literature different solutions are proposed for handling the peak demand of EVs and the related problems. One answer is offered by the implementation of EV charging strategies, through aggregation agents, for containing the impact on the grid, guaranteeing the quality of the service. The implementation of a real charging strategy is strictly related to a deployment of smart-grid technologies, such as smart meters, Information and Communication Technologies (ICTs) and energy storage systems (ESSs). In particular ESSs are playing a fundamental role in the general smart grid paradigm, and can become fundamental for the integration in the new power systems of EV fast charging stations of the last generation: in this case the storage can have peak shaving and power quality functions and also to make the charge time shorter. In the present paper, an overview on the different types of EVs charging stations, in reference to the present international European standards, and on the storage technologies for the integration of EV charging stations in smart grid is reported. Then a real implementation of EVs fast charging station equipped with an ESS is deeply described. The system is a prototype, designed, implemented and now available at ENEA (Italian National Agency for New Technologies, Energy and Sustainable Economic Development) labs. A wide experimental activity has been performed on the prototype system in order to test its functionalities in the integration in a smart grid available at the same ENEA lab, including a smart metering system. The integration has been possible thanks to the use of a customized communication protocol, developed by the researchers and here described. The results of the experimental tests show that the system has a good performance in the implementation of peak shaving functions, in respect of the main distribution grid, making the prototype like a network nearly zero-impact system.

Abstract The organic Rankine cycle (ORC) has been growing in importance as a technology for producing electricity from low temperature waste and renewable heat sources. In small-scale applications, the most used working fluid has been HFC-245fa, although this is being substituted for low GWP alternatives. A new HCFO working fluid, HCFO-1224yd(Z), has appeared as a possible alternative for HFC-245fa. In this study, this alternative working fluid is analysed and, finally, the working fluid is experimentally tested as drop-in alternative in a commercial ORC system. The main purpose is to determine the feasibility of using HCFO-1224yd(Z) as a drop-in replacement for HFC-245fa in a real facility that was initially designed to operate with HFC-245fa. The results show how the use of HCFO-1224yd(Z) offers power output that ranges from 7.5% to 17.4% lower than that provided by HFC-245fa. Although HFC-245fa offers higher power output, the results show that HCFO-1224yd(Z) offers up to 7.7% higher cycle net efficiency; this is due to the higher input thermal rate required by HFC-245fa. Finally, HCFO-1224yd(Z) has been stated as a suitable alternative to HFC-245fa as a drop-in replacement in a small-scale, low-temperature ORC, which increases its attractiveness for heat source with higher temperatures.

Domestic heating represents the most dominant energy function in Dutch households nowadays. Using district heat from CHP (combined heat and power) by means of a NGCC (natural gas-fired combined cycle) plants is generally acknowledged as an effective option to reduce primary energy consumption for heating. However, methods to calculate energy savings from CHP differ widely. This paper compares a number of different methods, including the method from the EU CHP Directive, to estimate primary energy savings in comparison with the typically used domestic gas-fired condensing boiler. Real hourly CHP plant performance data is used. An estimation of the CO2 mitigation cost of delivering district heat to Dutch dwellings is made. We find that supplying dwellings with district heat from an NGCC-CHP saves energy, regardless of the calculation method and for a rather wide range of reference efficiencies. CO2 mitigation costs are acceptable from a social perspective (at discount rates up to 4%, excluding fuel taxes) and negative from a private perspective (at discount rates up to 10%, including fuel taxes).