• Energy Research
• Embargo close
• 7. Clean energy close
• 13. Climate action close
• 12. Responsible consumption close
• National Research Council close

Traditionally, critical infrastructures demand for high dependability, being the services they provide essential to human beings and the society at large. However, more recent attention to cautious usage of energy resources is changing this vision and calls for solutions accounting for appropriate multi-requirements combinations when developing a critical infrastructure. In such a context, analysis supports able to assist the designer in envisioning a satisfactory trade-off among the multi-requirements for the system at hand are highly helpful. In this paper, the focus is on the railway sector and the contribution is a stochastic model-based analysis framework to quantitatively assess trade-offs between dependability indicators and electrical energy consumption incurred by the rail switch heating system.Moving from a preliminary study that concentrated on energy consumption only, the analysis framework has been extended to become a solid support to devise appropriate tuning of the heating policy that guarantees satisfactory trade-offs between dependability and energy consumption. An evaluation campaign in a variety of climate scenarios demonstrates the feasibility and utility of the developed framework.

Power system controls are vulnerable to cyber-attacks that can seriously affect and even inhibit their operation. Such attacks may affect large portions of the power system, make repair difficult and cause huge societal impact, so pressure to ensure cyber-security of control and communication systems is now strong worldwide. Several cyber-security frameworks were developed, but it is rather difficult to anticipate adoption costs and benefits, and this hampers their generalised adoption. T his paper focuses on the outcome of two case studies (concerning the Italian power generation and the Polish transmission systems. The socio-economic impact of failures and the costs of standard adoption are estimated on an objective basis. It is up to public authorities to decide whether to require the adoption of security standards to operators in the electric system. The nature of public good of security underlines the necessity of public support for this operation, but we discuss the extent and the management of this support.

Silicon carbide/silicon rich carbide multilayers, aimed at the formation of silicon nanodots for photovoltaic applications, have been studied. The electrical properties have been investigated at the nano-scale by conductive Atomic Force Microscopy (c-AFM) and at macro-scale by temperature dependent conductivity measurements. The mixture is composed of highly conductive Si nanoclusters and moderately conductive SiC nanoclusters in a disordered matrix. The conduction mechanism takes place via band states induced by the disorder at the interface between nanodot clusters. Structural properties have been extracted by optical spectroscopy analyses. The results contribute to the understanding of the microscopical electronic mechanisms of the composite material, which is a candidate for third generation photovoltaics.

Self-organizing nanopatterns can enable economically competitive, industrially applicable light-harvesting platforms for thin-film solar cells. In this work, we present transparent solar cell substrates having quasiperiodic uniaxial nanowrinkle patterns with high optical haze values. The self-organized nanowrinkle template is created by controlled heat-shrinking of metal-deposited pre-stretched polystyrene sheets. A scalable UV nanoimprinting method is used to transfer the nanopatterns to glass substrates on which single-junction hydrogenated amorphous silicon p-i-n solar cells are subsequently fabricated. The structural and optical analyses of the solar cell show that the nanowrinkle pattern is replicated throughout the solar cell structure leading to enhanced absorption of light. The efficient broadband light-trapping in the nanowrinkle solar cells results in very high 18.2 mA/cm2 short-circuit current density and 9.5% energy-conversion efficiency, which respectively are 35.8% and 39.7% higher than the values obtained in flat-substrate solar cells. The cost- and time-efficient technique introduces a promising new approach to customizable light-management strategies in thin-film solar cells.

The optical and photovoltaic properties of Si NCs / SiC multilayers (MLs) are investigated using a membrane-based solar cell structure. By removing the Si substrate in the active cell area, the MLs are studied without any bulk Si substrate contribution. The occurrence is confirmed by scanning electron microscopy and light-beam induced current mapping . Optical characterization combined with simulations allows us to determine the absorption within the ML absorber layer, isolated from the other cell stack layers. The results indicate that the absorption at wavelengths longer than 800 nm is only due to the SiC matrix. The measured short-circuit current is significantly lower than that theoretically obtained from absorption within the ML absorber, which is ascribed to losses that limit carrier extraction. The origin of these losses is discussed in terms of the material regions where recombination takes place. Our results indicate that carrier extraction is most efficient from the Si NCs themselves, whereas recombination is strongest in SiC and residual a-Si domains . Together with the observed onset of the external quantum efficiency (EQE) at 700-800 nm, this fact is an evidence of quantum confinement in Si NCs embedded in SiC on device level.

Railway is currently envisioned as the most promising transportation system for both people and freight to reduce atmospheric emission and combat climate change. In this context, ensuring the energy efficiency of the railway systems is paramount in order to sustain their future expandability with minimum carbon footprint. Recent advancements in computing and communication technologies are expected to play a significant role to enable novel integrated control and management strategies in which heterogeneous data is exploited to noticeably increase energy efficiency. In this paper we focus on exploiting the convergence of heterogeneous information to improve energy efficiency of railway systems, in particular on the heating system for the railroad switches, one of the major energy intensive components. To this aim, we define new policies to efficiently manage the heating of these switches exploiting also external information such as weather and forecast data. In order to assess the performance of each strategy, a stochastic model representing the structure and operation of the railroad switch heating system and environmental conditions (both weather profiles and specific failure events) has been developed and exercised in a variety of representative scenarios. The obtained results allow to understand both strengths and limitations of each energy management policy, and serves as a useful support to make the choice of the best technique to employ to save on energy consumption, given the system conditions at hand.

The use of graphene as transparent conducting layer in devices that require high temperature processing is proposed. The material shows stability upon thermal treatments up to 1100 °C ifc apped with a sacrificial silicon layer. The use of Cu foil or evaporated Cu as catalysts in Catalytic-Chemical Vapor Deposition growth gives rise to graphene ofs imilar properties, which represents a promising result in view of its direct integration in microelectronic devices. Photovoltaic p-i-n thin film devices were fab- ricated on the as-deposited or annealed graphene membranes and compared with similar devices that incorporate as-deposited Indium Tin Oxide. No degradation in series resistance is observed for the annealed device. A 3.7% and 2.8% photovoltaic conversion efficiency is observed on the devices fabricated on as-transferred and on annealed graphene respectively. The major limitation derives from the high sheet resistance of the as-transferred state-of-the-art material. The results opens the way to the use of graphene in applications that require transparent conducting layers resistant to high temperature pro- cessing.