• Energy Research
• 2021-2025close
• 12. Responsible consumption close
• 9. Industry and infrastructure close
• Energies close

Car-sharing services are developing at an ever-increasing pace. Taking into account the reduction of carbon dioxide emissions and pursuit of the sustainable development of transport, implementing electric cars in car-sharing fleets is being proposed. On the one hand, these types of vehicles are referred to as emission-free, but on the other hand, their environmental friendliness is questionable due to the emission of carbon dioxide during the production of energy to power them. Although many scientific papers are devoted to the issue of reducing emissions through car sharing, there is a research gap concerning the real production of carbon dioxide by car-sharing vehicles during car-sharing trips. To fill this research gap, the objective of the article was to analyze the actual level of carbon dioxide emissions from combustion and electric vehicles from car-sharing systems produced when renting rides. The test results showed that the electric car turned out to be significantly less emitting. The use of electric vehicles in car-sharing fleets can reduce carbon dioxide emissions from 14% to 65% compared to using cars with internal combustion engines. However, the key role during car-sharing trips is played by the driving style of the drivers, which has been omitted from the literature to date. This should be properly regulated by service providers and focus on the proper use of energy from electric vehicle batteries, especially at low temperatures. The article provides support for operators planning to modernize their fleet of vehicles and fills the research gap concerning car-sharing emissions.

The connection between Earth’s global temperature and carbon dioxide (CO2) emissions is one of the highest challenges in climate change science since there is some controversy about the real impact of CO2 emissions on the increase of global temperature. This work contributes to the existing literature by analyzing the relationship between CO2 emissions and the Earth’s global temperature for 61 years, providing a recent review of the emerging literature as well. Through a statistical approach based on maximum entropy, this study supports the results of other techniques that identify a positive impact of CO2 in the increase of the Earth’s global temperature. Given the well-known difficulties in the measurement of global temperature and CO2 emissions with high precision, this statistical approach is particularly appealing around climate change science, as it allows the replication of the original time series with the subsequent construction of confidence intervals for the model parameters. To prevent future risks, besides the present urgent decrease of greenhouse gas emissions, it is necessary to stop using the planet and nature as if resources were infinite.

Hydrogen, as a maritime fuel, is one of the solutions that will assist the shipping sector in addressing the challenges regarding decarbonization, taking into consideration the targets set for 2030 and 2050. The extensive utilization of hydrogen requires massive production of green hydrogen and the development of proper infrastructure to support a sustainable supply chain. An alternative solution is based on the on-board production of hydrogen, where production units are installed on-board the vessel. Along these lines, the HYMAR project aims to test the utilization of a hydrogen production unit for on-board use. The article deals with the use of hydrogen as a fuel for internal combustion engines, taking into consideration reports from literature and the preliminary results of the HYMAR project, focusing on the environmental impact and the reduction in emissions. Experimental investigation on a marine auxiliary engine for power generation, under the HYMAR project, leads to promising results regarding the environmental footprint of the internal combustion engine when hydrogen is added in the fuel mix with increasing percentages.

The proposed special issue (SI) has invited submissions related to renewable energy, energy storage, power converters and electric drive systems for electrified transportation and smart grid applications [...]

Incorporation of various alternative resources as co-digestion substrates aids to reduce the consumption of agricultural crops for biogas production. However, the efficiency and limitations of these co-substrates is still not fully understood. Use of biomass waste remaining after enzymatic hydrolysis for high value chemical fermentation, meat processing and dairy wastewater primary sludge as co-substrates in an agricultural resource anaerobic digestion plant is tackled within this study. The results showed that anionic surfactants (<200 ppm) can be used to improve fat, oil and grease (FOG) solubility in water and, at the same time, enhance the biomethane potential of FOG-containing sludge by increasing it from 1374.5 to 1765 mLCH4/gVS for meat processing wastewater primary sludge, and from 534 to 740 mLCH4/gVS for dairy wastewater primary sludge, when agricultural digestate is used as a substrate and sludge loading is not more than 10% from the volatile solids loaded. At the same time, only 549.7 mLCH4/gVS was produced as 30-day BMP when 5% biomass hydrolysis waste was used. Biomass hydrolysis waste co-digestion with primary sludge from dairy and meat processing wastewaters has an antigenic effect, and separate substrate anaerobic digestion gave a better results, thus, showing that excessive combination of various waste resources can be inhibitory for biogas production and the appropriate substrate selection and combination is a technical challenge for the biogas industry.

The prevailing need for a more sustainable management of natural resources depends not only on the decisions made by governments and the will of the population, but also on the knowledge of the role of energy in our society and the relevance of preserving natural resources. In this sense, critical work is being done to instill key concepts—such as the circular economy and sustainable energy—in higher education institutions. In this way, it is expected that future professionals and managers will be aware of the importance of energy optimization, and will learn a series of computational methods that can support the decision-making process. In the context of higher education, this paper reviews the main trends and challenges related to the concepts of circular economy and sustainable energy. Besides, we analyze the role of simulation and serious games as a learning tool for the aforementioned concepts. Finally, the paper provides insights and discusses open research opportunities regarding the use of these computational tools to incorporate circular economy concepts in higher education degrees. Our findings show that, while efforts are being made to include these concepts in current programs, there is still much work to be done, especially from the point of view of university management. In addition, the analysis of the teaching methodologies analyzed shows that, although their implementation has been successful in favoring the active learning of students, their use (especially that of serious games) is not yet widespread.

In this study, our aim was to explore the potential energy savings obtainable from the recycling of 1 tonne of Construction and Demolition Waste (C&DW) generated in the Metropolitan City of Naples. The main fraction composing the functional unit are mixed C&DW, soil and stones, concrete, iron, steel and aluminium. The results evidence that the recycling option for the C&DW is better than landfilling as well as that the production of recycled aggregates is environmentally sustainable since the induced energy and environmental impacts are lower than the avoided energy and environmental impacts in the life cycle of recycled aggregates. This LCA study shows that the transition to the Circular Economy offers many opportunities for improving the energy and environmental performances of the construction sector in the life cycle of construction materials by means of internal recycling strategies (recycling C&DW into recycled aggregates, recycled steel, iron and aluminum) as well as external recycling by using input of other sectors (agri-food by-products) for the manufacturing of construction materials. In this way, the C&D sector also contributes to realizing the energy and bioeconomy transition by disentangling itself from fossil fuel dependence.

The increasing demand for energy and commodities has led to escalating greenhouse gas emissions, the chief of which is represented by carbon dioxide (CO2). Blue hydrogen (H2), a low-carbon hydrogen produced from natural gas with carbon capture technologies applied, has been suggested as a possible alternative to fossil fuels in processes with hard-to-abate emission sources, including refining, chemical, petrochemical and transport sectors. Due to the recent international directives aimed to combat climate change, even existing hydrogen plants should be retrofitted with carbon capture units. To optimize the process economics of such retrofit, it has been proposed to remove CO2 from the pressure swing adsorption (PSA) tail gas to exploit the relatively high CO2 concentration. This study aimed to design and numerically investigate a vacuum pressure swing adsorption (VPSA) process capable of capturing CO2 from the PSA tail gas of an industrial steam methane reforming (SMR)-based hydrogen plant using NaX zeolite adsorbent. The effect of operating conditions, such as purge-to-feed ratio and desorption pressure, were evaluated in relation to CO2 purity, CO2 recovery, bed productivity and specific energy consumption. We found that conventional cycle configurations, namely a 2-bed, 4-step Skarstrom cycle and a 2-bed, 6-step modified Skarstrom cycle with pressure equalization, were able to concentrate CO2 to a purity greater than 95% with a CO2 recovery of around 77% and 90%, respectively. Therefore, the latter configuration could serve as an efficient process to decarbonize existing hydrogen plants and produce blue H2.