• Energy Research
• E3S Web of Conferences close
• SDSN Greece close

The article is devoted to calculations of load on rollers of a curvilinear continuous casting machine during bending of the ingot in the levelling section. The calculation takes into account the elastic and plastic characteristics of metal and the flexibility of the roller apparatus. Determination of load on rollers together with meeting other requirements such as reducing the cooling water consumption, minimizing the energy consumption enables optimizing the technology of slab cooling in the secondary cooling zone (SCZ) and obtaining metal of the required quality.

The aim of the research presented in the article is to develop methods and means for integrated modeling of compact expanded capacity power lines. Algorithms for determining modes of electrical energy systems were used based on phase coordinates based on application of elements models in form of lacelike equivalent networks with fully-meshed topology. These models and methods were implemented in Fazonord-APC software application, ensuring modeling of EES sta-tionary modes, and determining strengths of electromagnetic fields generated by power lines of different design. We demonstrate results of modes and electromagnetic fields modeling on routes of 220 kV compact overhead power supply lines (COPL) with horizontal positioning of wires. For the purpose of comparison, similar calculations were performed for a typical overhead power line (TOPL). The modeling results allowed to formulate the following conclusions: when overall sections of COPL and TOPL are equal, the losses of active power in compact OPL are significantly lower; thus, when transmitted power is 375 MW, the losses in COPL are reduced by 45% compared to a typical 220 kV OPL; at compact OPL receiver end a lower unsymmetry is observed; COPL ensure better electromagnetic safety conditions; electrical field strength at a height of 1.8 m for COPL axis is less than a similar index for TOPL by approximately 1.5 times; magnetic field in the same point is reduced to 60%.

The article discusses the problems associated with the tourism industry and the hotel business during the pandemic. A study was carried out and relevant conclusions were presented on how the pandemic affected the hotel business in Europe and Russia. The authors examined and analyzed in detail the indicators of forecasts in the sphere of the Russian hotel business, particularly in the regions. The authors paid special attention to the study of open public spaces and conducted a detailed analysis, which made it possible to identify the opportunities for the development of the hotel business. In the article the main trends of a pandemic and post-pandemic are studied – the need to reinforce sanitary measures. The research focuses on identifying the features of the economic state of the regions during the pandemic. The authors developed and substantiated the areas that are relevant, useful and applicable for the hotel business; revealed the features of the process of restoration of the hotel business. Special attention is paid to the study of state support measures; the features of their further actualization for the development of the tourism industry are presented. The authors have proposed the ways to overcome the crisis, contributing to a slow, but accurate and safe recovery of the hotel business and an increase in demand.

In the framework of the study, the authors consider conceptual approaches to improve the management system of agrarian sphere development of regions in the realities of this industry functioning in the Russian Federation. Agrarian sphere is shown in aspects of socio-economic territorial system with its subsystems. The transition mechanisms of the agrarian sphere to the rails of sustainable development due to the choice of priority development directions within the life cycle are presented. The necessity of applying an integrated approach to the solution of industrial and social problems of the agricultural sector of the country is proved and reasoned.

Many non-electrified rural communities find it challenging to follow a precise scientific protocol to assess the feasibility of installing a wind turbine on their site. The objective of the present work is to define a clear protocol for the assessment of wind potential of a rural site. The case of Logone Birni (LB) is taken as a case study. For this purpose, a protocol, integrating the wind parameters of the site have been used to calculate the wind power density, annual energy yield, and capacity factors at 10, 30, and 50 m height using 15 years data. The wind frequency distribution including seasonal has been investigated to determine accurately the wind power of the site. The coefficient of variation is calculated at three different heights. Also, an economic assessment per kWh of energy has been carried out. The results of this study show that it is possible to install a wind farm in LB site with a minimum of 30m height. In addition, wind turbines with a starting speed of 1.5 m/s and a rated power of 20 kW will produce electricity at a low cost (0.453USD/kWh).

Ammonia exhibits interesting features as fuel to feed Solid Oxide Fuel Cell. Herein, Ni and La co-doped strontium titanate was synthetized using wet chemistry route. Ni nanoparticles emerged via exsolution in reducing environment to decorate the surface. X-Ray Diffraction measurements exhibits perovskite structure was also preserved after the exsolution, as expected. H2 – Temperature Programmed Reduction highlights the great resistance of titanates in anode operation condition. Ammonia conversion in nitrogen and hydrogen were investigated by catalytic tests. It begins to decompose at 560°C and the full yield was achieved at 720°C. Electrochemical measurements were recorded at 800°C using 10% of ammonia in Ar. They were analysed though the model of equivalent circuit and two processes were attributed. Results certify Ni exsolution strongly enhances the hydrogen oxidation and the total polarisation resistance in ammonia approaches to the one in hydrogen.

The author summarizes the author’s techniques used in psychology classes with the aim of meaningfully transforming educational information by bachelors into their personal knowledge. The methodology for developing techniques was based on idiographic and qualitative approaches. The productive ideas of V.P. Zinchenko about “living” knowledge and the fundamental difference between information and knowledge, his original and fruitful metaphor about the fifth dimension of being, which he associated with meaning; a consequence of this metaphor about the difficulties of the process of generating an affectively colored space of meanings by a person turned out to be useful. The procedural aspect and content of four specific techniques for transforming educational psychological information are described. Examples of the use of techniques in the study of specific psychological disciplines are given. A special technique of creating and accumulating knowledge about his person by transforming educational psychological information into verbal self-portraits is highlighted. The question is raised about the correspondence of the knowledge obtained by bachelors as a result of the application of the proposed techniques to the content of the concept of “living” knowledge in the understanding of V.P. Zinchenko. The author’s version of the answer to this question is offered. A hypothesis is formulated about the possible mechanisms of transformation of educational psychological information into meaningful knowledge of bachelors. Two promising directions for the continuation of the empirical research pre sented in the article are highlighted.

Prefabricated building, as a representative of modern architecture, has been vigorously promoted, and the traditional problems of large on-site labor and long construction period have been well solved. At present, the development focus of prefabricated building has shifted to the stage of low-carbon, environmental protection, green and energy-saving sustainable development. Whether green and low-carbon design is considered in the planning and design stage has the greatest impact on the whole life cycle of the building. Therefore, this paper mainly summarizes the concept and importance of green and low-carbon building design; The paper points out the embodiment of green and low-carbon concept in prefabricated building design; And how to calculate the carbon emission in the design stage; In view of the prefabricated building design stage to achieve a better green low-carbon state of optimization countermeasures.