• Energy Research
• 2021-2025close
• SA close
• TR close
• UZ close
• Sustainability close

The COVID-19 pandemic represents a type of force majeure that significantly and unexpectedly affected all human lifestyles. This study includes an integrative review of articles published across Scopus and Web of Science journals and compiled using the systematic review methodology based on the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) Statement and VOSreview (visualization of similarities) software by defining keywords that include “construction industry” and “force majeure” and “environmental risks” as a starting point. Moreover, the research years and the countries covered by this research were determined in a second stage. Finally, the abstracts of selected studies were reviewed in order to extract factors similar to the pandemic conditions of COVID-19 along with the brief results of the research. Out of 6384 publications identified and 56 publications reporting, 20 studies fulfilled the inclusion criteria with full text. Based on our findings, there has been a continuous growth of publications on construction risk and environmental research since 2010. Malaysia had the greatest contribution to the research topic of the countries covered by the study, followed by Egypt. The Engineering, Construction and Architectural Management journal published the greatest number of publications related to the research topic. In this review, the most important previous studies are classified according to their handling of force majeure and environmental risks and the most important factors mentioned in these studies are identified. In addition, recommendations are made for dealing with the COVID-19 pandemic and for mitigating its effects on the construction industry in the Arab world and Malaysia. The results of this review will benefit researchers and construction companies alike in furthering research on reducing the risks of COVID-19 to construction projects and avoiding the significant economic loss that results from stopping these projects.

The heat generation from recent advanced computer chips is increasing rapidly. This creates a challenge in cooling the chips while maintaining their temperatures below the threshold values. Another challenge is that the heat generation in the chip is not uniform where some chip components generate more heat than other components. This would create a large temperature gradient across the chip, resulting in inducing thermal stresses inside the chip that may lead to a high probability to damage the chip. The locations in the chip with heat rates that correspond to high heat fluxes are known as hotspots. This research study focuses on using thermoelectric modules (TEMs) for cooling chip hotspots of different heat fluxes. When a TEM is used for cooling a chip hotspot, it is called a thermoelectric cooler (TEC), which requires electrical power. Additionally, when a TEM is used for converting a chip’s wasted heat to electrical power, it is called a thermoelectric generator (TEG). In this study, the TEMs are used for cooling the hotspots of computer chips, and a TEC is attached to the hotspot to reduce its temperature to an acceptable value. On the other hand, the other cold surfaces of the chip are attached to TEGs for harvesting electrical power from the chip’s wasted heat. Thereafter, this harvested electrical power (HEP) is then used to run the TEC attached to the hotspot. Since no external electrical power is needed for cooling the hotspot to an acceptable temperature, this technique is called a sustainable self-cooling framework (SSCF). In this paper, the operation principles of the SSCF to cool the hotspot, subjected to different operating conditions, are discussed. As well, considerations are given to investigate the effect of the TEM geometrical parameters, such as the P-/N-leg height and spacing between the legs in both operations of the TEC mode and TEG mode on the SSCF performance.

Globally, the empowerment of women is a critical and challenging issue. In considering the problem, the researchers sought to investigate Women’s Empowerment (WE) in the context of Saudi Arabia. In this study the researchers applied quantitative methods and collected the cross-sectional data through a questionnaire based on a random sampling technique. The study utilized 314 useable samples to conclude the investigation. Using path analysis through Analysis of Moment Structures (AMOS) version 26.0, the study underlines a positive and significant effect of Economic Empowerment (EE) and Social Empowerment (SE) on WE. On the other hand, Political Empowerment (PE) has a negative effect on WE. Moreover, Self-efficacy (SFY) and Family Support (FS) also positively and significantly affect WE. Regarding the mediating effects, SFY mediates the positive relationship of EE and SE with WE. On the contrary, SFY did not develop a positive relationship between PE and WE. Finally, FS plays a crucial mediating role in developing the association between EE, SE, PE and WE among Saudi Arabian women. This study’s findings support policymakers and planners in developing policies and strategies to boost WE significantly. Finally, through the empirical confirmation between EE, SE, PE, SFY, FS and WE in Saudi Arabia, a Middle East country, this study’s findings add further enrichment to the depth of the literature.

The growing population and increasing urbanization have led to a surge in domestic wastewater generation, posing significant challenges for effective and sustainable treatment. The present study demonstrates a novel and sustainable approach for the onsite treatment of domestic wastewater using an integrated settler-based biofilm reactor (ISBR) with efficient biogas generation. The ISBR provides an optimized environment for the growth of biofilm, facilitating the removal of organic pollutants and pathogens. Moreover, the ISBR enables the recovery of a valuable resource in the form of biogas, thus enhancing the overall utility of the treatment process. The performance of the ISBR was comprehensively evaluated at laboratory scale through treating the actual domestic wastewater generated from the hostel of Manipal University Jaipur. The ISBR system was operated under an ambient environment at a hydraulic retention time (HRT) of 24 h. The results demonstrated remarkable efficiency in terms of chemical oxygen demand (COD), total suspended solids (TSS), and coliforms removal, with average removal efficiency being more than 90%. According to the COD mass balance analysis, 48.2% of the influent COD was recovered as bioenergy. The chromatogram revealed a high percentage of methane gas in the collected biogas sample. The field emission scanning electron microscope (FESEM) analysis of the accumulated sludge in the ISBR system depicted the morphology of methanogenic bacteria. Both the experimental and theoretical results confirmed the feasibility and sustainability of the ISBR system at the onsite level.

Connection between electric power networks is essential to cover any deficit in the generation of power from any of them. The exchange powers of the plants during load disturbance should not be violated beyond their specified values. This can be achieved by installing load frequency control (LFC); therefore, this paper proposes a new metaheuristic-based approach using a skill optimization algorithm (SOA) to design a fractional-order proportional integral derivative (FOPID)-LFC approach with multi-interconnected systems. The target is minimizing the integral time absolute error (ITAE) of frequency and exchange power violations. Two power systems are investigated. The first one has two connected plants of photovoltaic (PV) and thermal units. The second system contains four plants, namely, PV, wind turbine, and two thermal plants, with governor dead-band (GDB) and generation rate constraints (GRC). Different load disturbances are analyzed in both considered systems. Extensive comparisons to the use of chef-based optimization algorithm (CBOA), jumping spider optimization algorithm (JSOA), Bonobo optimization (BO), Tasmanian devil optimization (TDO), and Atomic orbital search (AOS) are conducted. Moreover, statistical tests of Friedman ANOVA table, Wilcoxon rank test, Friedman rank test, and Kruskal Wallis test are implemented. Regarding the two interconnected areas, the proposed SOA achieved the minimum fitness value of 1.8779 pu during 10% disturbance on thermal plant. In addition, it outperformed all other approaches in the case of 1% disturbance on the first area as it achieved ITAE of 0.0327 pu. The obtained results proved the competence and reliability of the proposed SOA in designing an efficient FOPID-LFC in multi-interconnected power systems with multiple sources.

The supplier selection decision, within the scope of supply chain management (SCM), is one of the key decisions that plays an important role in the success of the business. The supplier selection problem, which aims to determine the most suitable suppliers in line with the demands of the enterprises, can be defined as a Multi-Criteria Decision Making (MCDM) problem that includes both quantitative and non-quantitative criteria. While there is a large body of literature on supplier selection studies using MCDM methods, the number of studies in the health sector is relatively low compared to other sectors. Although much research can be found regarding the application of MCDM techniques in clinical operations, less research has been conducted on the problem of supplier selection in healthcare services, which has a high complexity level. The main purpose of the study is to develop a holistic MCDM model as a decision support system for supplier selection in the health sector. The decision-making trial and evaluation laboratory (DEMATEL) and Analytical Network Process (ANP) methods were used together to analyze the model. The main criteria used in the study are price, quality, logistics, sustainability, and occupational health and safety (OHS). As sustainability and OHS rarely exist in supplier selection studies in the health sector, this holistic model can contribute to the literature in that aspect. According to the findings and the main criteria ranking, the most important criteria, emerged as price, quality, sustainability, OHS, technique, and logistics. The results indicate the importance of sustainability in supplier selection in the health sector. The method proposed in this study may help health managers as a support system for making purchasing decisions.

Biogas is one of the most attractive renewable resources due to its ability to convert waste into energy. Biogas is produced during an anaerobic digestion process from different organic waste resources with a combination of mainly CH4 (~50 mol/mol), CO2 (~15 mol/mol), and some trace gasses. The percentage of these trace gases is related to operating conditions and feedstocks. Due to the impurities of the trace gases, raw biogas has to be cleaned before use for many applications. Therefore, the cleaning, upgrading, and utilization of biogas has become an important topic that has been widely studied in recent years. In this review, raw biogas components are investigated in relation to feedstock resources. Then, using recent developments, it describes the cleaning methods that have been used to eliminate unwanted components in biogas. Additionally, the upgrading processes are systematically reviewed according to their technology, recovery range, and state of the art methods in this area, regarding obtaining biomethane from biogas. Furthermore, these upgrading methods have been comprehensively reviewed and compared with each other in terms of electricity consumption and methane losses. This comparison revealed that amine scrubbing is one the most promising methods in terms of methane losses and the energy demand of the system. In the section on biogas utilization, raw biogas and biomethane have been assessed with recently available data from the literature according to their usage areas and methods. It seems that biogas can be used as a biofuel to produce energy via CHP and fuel cells with high efficiency. Moreover, it is able to be utilized in an internal combustion engine which reduces exhaust emissions by using biofuels. Lastly, chemical production such as biomethanol, bioethanol, and higher alcohols are in the development stage for utilization of biogas and are discussed in depth. This review reveals that most biogas utilization approaches are in their early stages. The gaps that require further investigations in the field have been identified and highlighted for future research.

Management of natural resources is pivotal for sustained economic growth—the increasing ecological footprints causing biocapacity deficit threaten the resource conversation agenda. The study identified the potential causes and consequences of natural resource depletion in a broad cross-section of 138 countries. Ecological footprints, international migrant stocks, industrial value-added, and population growth influenced natural resource capital across countries. The results show that ecological footprints, industrial value-added, and population growth are the detrimental factors of resource capital. In contrast, continued economic growth is helpful to conserve natural resources for future generations. The rise and fall in the natural resource degradation are evident in the wake of international migrants’ stocks to support an inverted U-shaped relationship between them. The Granger causality inferences confirmed the one-way linkages, running from international migrant stocks, economic growth, and population growth to natural resource degradation. It verifies migrants-led, affluence-led, and population-led resource degradation. Ecological footprints Granger causes industrial value-added across countries. The forecasting estimates suggested that economic growth would likely to influenced greater in magnitude to resource degradation by its innovation shocks of 4.791%, followed by international migrant stocks, population growth, ecological footprints, and industrial value added by their innovation shocks of 4.709%, 1.829%, 1.247%, and 0.700%, respectively. The study concludes that international migrant stocks should manage smartly, causing more resource degradation via a channel of increasing biocapacity deficit across countries.