• Energy Research

Surface-bound heteroleptic copper(I) dyes [Cu(Lanchor)(Lancillary)]+ are assembled using the “surfaces-as-ligands, surfaces as complexes” (SALSAC) approach by three different procedures. The anchoring and ancillary ligands chosen are ((6,6′-dimethyl-[2,2′-bipyridine]-4,4′-diyl)-bis(4,1-phenylene))bis(phosphonic acid) (3) and 4,4′-bis(4-iodophenyl)-6,6′-diphenyl-2,2′-bipyridine (4), respectively. In the first SALSAC procedure, the FTO/TiO2 electrode is functionalized with 3 in the first dye bath, and then undergoes ligand exchange with the homoleptic complex [Cu(4)2][PF6] to give surface-bound [Cu(3)(4)]+. In the second method, the FTO/TiO2 electrode functionalized with 3 is immersed in a solution containing a 1:1 mixture of [Cu(MeCN)4][PF6] and 4 to give surface-anchored [Cu(3)(4)]+. In the third procedure, the anchor 3, copper(I) ion and ancillary ligand 4 are introduced in a sequential manner. The performances of the DSSCs show a dependence on the dye assembly procedure. The sequential method leads to the best-performing DSSCs with the highest values of JSC (7.85 and 7.73 mA cm−2 for fully masked cells) and overall efficiencies (η = 2.81 and 2.71%, representing 41.1 and 39.6% relative to an N719 reference DSSC). Use of the 1:1 mixture of [Cu(MeCN)4][PF6] and 4 yields DSSCs with higher VOC values but lower JSC values compared to those assembled using the sequential approach; values of η are 2.27 and 2.29% versus 6.84% for the N719 reference DSSC. The ligand exchange procedure leads to DSSCs that perform relatively poorly. The investigation demonstrates the versatile and powerful nature of SALSAC in preparing dyes for copper-based DSSCs, allowing the photoconversion efficiency of dye to be optimized for a given dye. The SALSAC strategy provides alternative hierarchical strategies where the isolation of the homoleptic [Cu(Lancillary)2]+ is difficult or time-consuming; stepwise strategies are more atom-economic than ligand exchange involving the homoleptic [Cu(Lancillary)2]+.

The syntheses of 4,4′-bis(4-dimethylaminophenyl)-6,6′-dimethyl-2,2′-bipyridine (1), 4,4′-bis(4-dimethylaminophenylethynyl)-6,6′-dimethyl-2,2′-bipyridine (2), 4,4′-bis(4-diphenylaminophenyl)-6,6′-dimethyl-2,2′-bipyridine (3), and 4,4′-bis(4-diphenylaminophenylethynyl)-6,6′-dimethyl-2,2′-bipyridine (4) are reported along with the preparations and characterisations of their homoleptic copper(I) complexes [CuL2][PF6] (L = 1–4). The solution absorption spectra of the complexes exhibit ligand-centred absorptions in addition to absorptions in the visible region assigned to a combination of intra-ligand and metal-to-ligand charge-transfer. Heteroleptic [Cu(5)(Lancillary)]+ dyes in which 5 is the anchoring ligand ((6,6′-dimethyl-[2,2′-bipyridine]-4,4′-diyl)bis(4,1-phenylene))bis(phosphonic acid) and Lancillary = 1–4 have been assembled on fluorine-doped tin oxide (FTO)-TiO2 electrodes in dye-sensitized solar cells (DSCs). Performance parameters and external quantum efficiency (EQE) spectra of the DSCs (four fully-masked cells for each dye) reveal that the best performing dyes are [Cu(5)(1)]+ and [Cu(5)(3)]+. The alkynyl spacers are not beneficial, leading to a decrease in the short-circuit current density (JSC), confirmed by lower values of EQEmax. Addition of a co-absorbent (n-decylphosphonic acid) to [Cu(5)(1)]+ lead to no significant enhancement of performance for DSCs sensitized with [Cu(5)(1)]+. Electrochemical impedance spectroscopy (EIS) has been used to investigate the interfaces in DSCs; the analysis shows that more favourable electron injection into TiO2 is observed for sensitizers without the alkynyl spacer and confirms higher JSC values for [Cu(5)(1)]+.

The search for affordable high performance electrode materials in photoelectrochemical hydrogen production by solar water splitting is an ongoing quest. Hematite is a photoanode material with an electronic band gap suitable for efficient absorption of visible light in a photoelectrochemical cell (PEC). Although its poor electronic structure makes hematite a controversial candidate for PEC, it remains promising because it is an earth abundant, chemically stable and low cost material – necessary prerequisites for PEC to become a competitive cost-efficient solar fuel economy. In addition to reviewing some recent PEC research on hematite and its relevant physical and chemical characteristics, we show how hematite obtained by a low cost synthesis can be refined by hydrothermal treatment and further functionalized by coating with phycocyanin, a light harvesting protein known for photosynthesis in blue-green algae.

A systematic investigation of four heteroleptic bis(diimine) copper(I) dyes in n-type Dye-Sensitized Solar Cells (DSSCs) is presented. The dyes are assembled using a stepwise, on-surface assembly. The dyes contain a phosphonic acid-functionalized 2,2′-bipyridine (bpy) anchoring domain (5) and ancillary bpy ligands that bear peripheral phenyl (1), 4-methoxyphenyl (2), 3,5-dimethoxyphenyl (3), or 3,4,5-trimethoxyphenyl (4) substituents. In masked DSSCs, the best overall photoconversion efficiency was obtained with the dye [Cu(5)(4)]+ (1.96% versus 5.79% for N719). Values of JSC for both [Cu(5)(2)]+ (in which the 4-MeO group is electron releasing) and [Cu(5)(4)]+ (which combines electron-releasing and electron-withdrawing effects of the 4- and 3,5-substituents) and are enhanced with respect to [Cu(5)(1)]+. DSSCs with [Cu(5)(3)]+ show the lowest JSC. Solid-state absorption spectra and external quantum efficiency spectra reveal that [Cu(5)(4)]+ benefits from an extended spectral range at higher energies. Values of VOC are in the order [Cu(5)(4)]+ > [Cu(5)(1)]+ > [Cu(5)(2)]+ > [Cu(5)(3)]+. Density functional theory calculations suggest that methoxyphenyl character in MOs within the HOMO manifold in [Cu(5)(2)]+ and [Cu(5)(4)]+ may contribute to the enhanced performances of these dyes with respect to [Cu(5)(1)]+.

Monolayers of [Ru(bpy)2(micro-1)M2][PF6]4 salts (M = Os, Ru; bpy = 2,2'-bipyridine, 1 = 4'-(2,2'-bipyridin-4-yl)-2,2':6',2' '-terpyridine, tpy = 2,2':6',2' '-terpyridine, and 2 = 4'-(4-pyridyl)-2,2':6',2' '-terpyridine) were self-assembled on platinum and investigated by fast-scan electrochemistry. The electrochemistry of the complexes in solution and confined to the surface in self-assembled monolayers (SAMs) exhibited an almost ideal behavior. Scan-rate-dependent measurements of the peak current density (jp) were used to determine interaction energies within the monolayer. It is shown that the tpy coordination sites of the dinuclear complexes interact more strongly within the SAM than the bipyridine-coordinated fragments. This result was supported by peak potential shifts, which are due to interaction forces in SAMs. The alignment of the rodlike complexes relative to the surface is discussed, and the results of molecular mechanics calculations indicate that the species adopt a tilted orientation.

We demonstrate that the performances of dye-sensitized solar cells (DSCs) sensitized with a previously reported N-heterocyclic carbene iron(II) dye in the presence of chenodeoxycholic acid co-adsorbant, can be considerably improved by altering the composition of the electrolyte while retaining an I−/I3− redox shuttle. Critical factors are the solvent, presence of ionic liquid, and the use of the additives 1-methylbenzimidazole (MBI) and 4-tert-butylpyridine (TBP). For the electrolyte solvent, 3-methoxypropionitrile (MPN) is preferable to acetonitrile, leading to a higher short-circuit current density (JSC) with little change in the open-circuit voltage (VOC). For electrolytes containing MPN, an ionic liquid and MBI (0.5 M), DSC performance depended on the ionic liquid with 1-ethyl-3-methylimidazolium hexafluoridophosphate (EMIMPF) > 1,2-dimethyl-3-propylimidazolium iodide (DMPII) > 1-butyl-3-methylimidazolium iodide (BMII) ≈ 1-butyl-3-methylimidazolium hexafluoridophosphate (BMIMPF). Omitting the MBI leads to a significant improvement in JSC when the ionic liquid is DMPII, BMII or BMIMPF, but with EMIMPF the removal of the MBI additive results in a dramatic decrease in VOC (542 to 42 mV). For electrolytes containing MPN and DMPII, the effects of altering the MBI concentration have also been investigated. Although the addition of TBP improves VOC, it causes significant decreases in JSC. The best performing DSCs with the NHC-iron(II) dye employ an I−/I3−-based electrolyte with MPN as solvent, DMPII ionic liquid (0.6 M) with no or 0.01 M MBI; values of JSC = 2.31 to 2.78 mA cm−2, VOC = 292 to 374 mV have been achieved giving η in the range of 0.47 to 0.57% which represents 7.8 to 9.3% relative to an N719 reference DSC set at 100%. Electrochemical impedance spectroscopy has been used to understand the role of the MBI additive in the electrolytes.

We report the synthesis and characterization of the first example of an organic dye, PP1, for p-type dye-sensitized solar cells (DSCs) bearing a phosphonic acid anchoring group. PP1 is structurally related to the benchmarking dye, P1, which possesses a carboxylic acid anchor. The solution absorption spectra of PP1 and P1 are similar (PP1 has λmax = 478 nm and εmax = 62,800 dm3 mol−1 cm−1), as are the solid-state absorption spectra of the dyes adsorbed on FTO/NiO electrodes. p-Type DSCs with NiO as semiconductor and sensitized with P1 or PP1 perform comparably. For PP1, short-circuit current densities (JSC) and open-circuit voltages (VOC) for five DSCs lie between 1.11 and 1.45 mA cm−2, and 119 and 143 mV, respectively, compared to ranges of 1.55–1.80 mA cm−2 and 117–130 mV for P1. Photoconversion efficiencies with PP1 are in the range 0.054–0.069%, compared to 0.065–0.079% for P1. Electrochemical impedance spectroscopy, open-circuit photovoltage decay and intensity-modulated photocurrent spectroscopy have been used to compare DSCs with P1 and PP1 in detail.